- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
ive watched projectors for longer periods in professional shows...but having one at home is awesome
offtopic:
is your avatar pic from fallout New Vegas?
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
i got my CASA projector :)
- Thread starter borgqueenx
- Start date
offtopic:
is your avatar pic from fallout New Vegas?
Grix
0
- Joined
- Dec 9, 2008
- Messages
- 2,190
- Points
- 63
Nah it's from the book "Nineteen Eighty-Four"
- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
How expensive was the toy in your sig?
On my projector a galvo mirror broke
Glad im upgrading those anyways^^
YouTube - Casa laser projector project trouble
Grix
0
- Joined
- Dec 9, 2008
- Messages
- 2,190
- Points
- 63
It was $1300, however I got it for free because it's for an event me and some buddies are planning, and the budget paid for it
- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
Nice
Im searching for galvos. Planning on buying very soon.
Right now my eyes are on the pt-30 from spacelas.com
Anything better?
Im searching for galvos. Planning on buying very soon.
Right now my eyes are on the pt-30 from spacelas.com
Anything better?
- Joined
- Dec 1, 2008
- Messages
- 878
- Points
- 28
my eyes are on the pt-30 from spacelas.com
Anything better?
There are allot of scanners that are "better", but for the price you cant go wrong with the pt30s. You will love em
- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
The ones from spacelas or...? I heard there are about 3 galvos with desame name...There are allot of scanners that are "better", but for the price you cant go wrong with the pt30s. You will love em
- Joined
- Dec 1, 2008
- Messages
- 878
- Points
- 28
Ya, I have seen them called a few different names, but Spacelas(pt30k) are the ones.
Xer0
0
- Joined
- Dec 2, 2008
- Messages
- 464
- Points
- 0
Pufen Lighting. had one too, but sold it.
good optics, diode cases and mirror mounts. but super crap galvos
Try to replace them with Scanpros if dont want to to 100% from scratch
good optics, diode cases and mirror mounts. but super crap galvos
Try to replace them with Scanpros if dont want to to 100% from scratch
- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
scanpro's say they are 30kpps but they achieve that only at 8 degrees scanning angle. i dont like that.
- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
This morning something of my clothes hooked up with my projector then it dropped on the floor. a not so hard but also not so soft floor. i think it was hit on its side but i am not sure.
Anyways it stopped working...
all LED's inside are lit, cooling is on and working, but the lasers and galvos wont do a thing.
I made a video showing the projector and with a bit more explaining.
like i said in the video, the lasers do turn on at the beginning when flipping the power switch so there has to be some power in there. it just wont create the show. (it always acted like this. half a second blink all lasers then after 2 seconds starting the show)
I want to ask you to watch and listen to the video and help me.
i hope you guys can help me out...
YouTube - Laser projector trouble
Anyways it stopped working...
all LED's inside are lit, cooling is on and working, but the lasers and galvos wont do a thing.
I made a video showing the projector and with a bit more explaining.
like i said in the video, the lasers do turn on at the beginning when flipping the power switch so there has to be some power in there. it just wont create the show. (it always acted like this. half a second blink all lasers then after 2 seconds starting the show)
I want to ask you to watch and listen to the video and help me.
i hope you guys can help me out...
YouTube - Laser projector trouble
Grix
0
- Joined
- Dec 9, 2008
- Messages
- 2,190
- Points
- 63
Looks like a failure in the PT-itrust board since everything seems to be working except the built-in show.. Are you positive all the connectors and stuff are properly connected?
Last edited:
vk2fro
0
- Joined
- Nov 30, 2009
- Messages
- 1,304
- Points
- 63
Yes with the projector unplugged go around and unplug each cable then plug it back in (so you dont get them confused). One may be sitting there looking like its plugged in but has actually worked itself loose enough to stop the system working.
Still waiting on my replacement red diode. Hurry up O-like
Still waiting on my replacement red diode. Hurry up O-like
- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
yes im sure i triple checked it...i dont see any damage so its strange.
when its the pt-itrust card...i hope it still runs on ilda. I cant check it out though since i dont have a dac
- Joined
- Jun 30, 2008
- Messages
- 1,660
- Points
- 48
BUMPYDUMPY time!
the flightcase i used was way to big so i made some changes using wood
www.gdteam.net/images/lasers/projector/wood/IMG_4641.JPG
www.gdteam.net/images/lasers/projector/wood/IMG_4642.JPG
and here you can see how well the isolation between the wood, the fan filter and the uv filter does its job:
www.gdteam.net/images/lasers/projector/wood/IMG_4643.JPG
was a long day today, but im happy with the results.
next week im trying to get stickers, somewhere in the netherlands. (anyone knows a good shop?)
Then i also need some kind of hook system to hang the projector on the ceiling and to carry it around.
the flightcase i used was way to big so i made some changes using wood
www.gdteam.net/images/lasers/projector/wood/IMG_4641.JPG
www.gdteam.net/images/lasers/projector/wood/IMG_4642.JPG
and here you can see how well the isolation between the wood, the fan filter and the uv filter does its job:
www.gdteam.net/images/lasers/projector/wood/IMG_4643.JPG
was a long day today, but im happy with the results.
next week im trying to get stickers, somewhere in the netherlands. (anyone knows a good shop?)
Then i also need some kind of hook system to hang the projector on the ceiling and to carry it around.
