Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Laser Shows



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 12-25-2010, 03:27 PM #17
bobhaha's Avatar
Class 3B Laser
 
Join Date: May 2009
Location: Sydney, Australia
Posts: 3,256
Rep Power: 360
bobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond repute
bobhaha bobhaha is offline
Class 3B Laser
bobhaha's Avatar
 
Join Date: May 2009
Location: Sydney, Australia
Posts: 3,256
Rep Power: 360
bobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond reputebobhaha has a reputation beyond repute
Default Re: i got my CASA projector :)

If your buying new galvos, I'll take the old ones


__________________
Lasers!
10.6um - >40W CO2 Laser - 25W RF excited CO2 Laser*
685nm - Being built!
660nm - 250mW LOC PowerLight B50 Host - 100mW WL pulsar
635nm - 430mW C6 Host*
632.8nm - Red He-Ne laser ~1mW
593.5nm - Regal 5
542.8nm - Green He-Ne laser ~2.5mW
532nm - 620mW+ lasersman Firedragon III* - 100mW PGL-III-M from JETLASERS* - 70mW Rayfoss Host*
~~~ - 175mW Rayfoss Host - <5mW WL Core - 55mW DinoDirect review laser*

488nm - On the hoist
473nm - 2x CNI lab lasers ~40mW
445nm - 3W Big Boyz Laser - >1.1W Cree C6 Host - 650mW WL Arctic
405nm - 65mW GLP-405 Aquarius host - 160mW 6x Blu-ray MXDL Host
Total: 71,868.5 mW

Goggles!
Laser glow LSG-532-Sport protective eye goggles OD 7+ 190-532nm HIGHLY RECOMMENDED!!
Jetlasers wrap around 190-540nm OD4+ goggles*
Eagle Pair Red OD4+ goggles
Scopeguy20 Blublockers for 405nm lasers!

* indicates a review has been done, on this item.

Check out my How to Build a Selectable Dummy Load Thread!
bobhaha is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 12-25-2010, 03:36 PM #18
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

Quote:
Originally Posted by bobhaha View Post
If your buying new galvos, I'll take the old ones
if you can come over here help installing the new ones, fine!
what do ya want with old crappy galvo's anyway. all projection images flicker alot...
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.
borgqueenx is offline   Reply With Quote
Old 12-26-2010, 01:54 PM #19
vk2fro's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Sydney, Australia
Posts: 1,154
Rep Power: 57
vk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond repute
vk2fro vk2fro is offline
Class 3R Laser
vk2fro's Avatar
 
Join Date: Nov 2009
Location: Sydney, Australia
Posts: 1,154
Rep Power: 57
vk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond repute
Default Re: i got my CASA projector :)

Borg, what part are you referring to when you mean the "galvo breadboard"?

is that the aluminium block the galvos sit it, or the bit the aluminium block is attached to?

I see a breadboard as the big metal plate that the entire optical system is attached to (lasers, dichros (your calling them mirrors) and scanner block)

When I return from new years I'll open up my poseidon and show you what it looks like inside. It DOES have adjustable dichro mounts (ok not kinimetic ones like suggested on PL), but adjustable is better than hotglued!

Also my projector actually came with 20kpps galvos that DO do 20kpps, not over rated 15kpps.

I'm running it with a DAC (the frame streamer) and beamshows look fantastic. Since I'm not really into graphics shows, I dont REALLY have to upgrade my galvos, so I'll save the better galvos for my homebuilt projector. I did play a graphics show (think it was set to a tune by the bangles, the egyptian one) and it flickered a bit, but it wasnt too bad. If I wanted to show that at friends parties, I'd rather 30 or even 40 kpps so its flicker free.

Sorry you broke your dichro.

Check to see if you can warm the glue (a hair dryer on low shouldnt damage anything) - this will make it soft and allow you to remove stuff from the projector (or adjust it), but dont force it - if you heat up the glue and it still wont move, you'll likely damage something else.

I would only take the hairdryer advice if your going to replace the dichros, as it may ruin the current ones. hot glue is awful stuff and I only use it in things where I am going to get vibration, or to seal - I use it on the big fan on the side of my pc for both sealing, and to isolate it from the case panel so it is quiet.

edit: I am uploading a video from my projector so you can see what one looks like running from a DAC. Heaps more impressive than the DMX board!

Cheers
Ben
__________________
Taipan Projector: 3.5-4 W B(445nm)1.5W, G(532nm)1.5W R(637nm)1W DT30 Still building!
All solid state PJ: 1W B(462)400mw G(520)200mw R(638) 400mw DT40W (collecting bits)
Pointers: 1.0 watt "Z-Lase" - 520 nm diode by DTR attached to segelei zmax V5 Vaporizer
Gassers: Omnichrome 643 Multi Line AR/KR+ ION!!!! doing ~190mW Low hours too!
Siemens 3 mw 632nm helium neon

Last edited by vk2fro; 12-26-2010 at 01:58 PM.
vk2fro is offline   Reply With Quote
Old 12-26-2010, 02:24 PM #20
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

update with good news:
i worked 2 hours but removed all the glue from the cable ends/connections. Unfortunatly the dichro's are glued with other glue, something much more harder. i can smash on it whatever i want with a knife or something, but it wont brake.
I dont care if the dichro's are destroyed by removing them, as long as the surrounding lasers are not damaged.

Yes with the board i ment the alluminium plate beneath the actual galvos. (the vibrating mirrors/scanner block. I need a new one since i cant remove the current galvo from the plate.
Where can i buy a replacement?

Thanks.
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.
borgqueenx is offline   Reply With Quote
Old 12-26-2010, 02:52 PM #21
vk2fro's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Sydney, Australia
Posts: 1,154
Rep Power: 57
vk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond repute
vk2fro vk2fro is offline
Class 3R Laser
vk2fro's Avatar
 
Join Date: Nov 2009
Location: Sydney, Australia
Posts: 1,154
Rep Power: 57
vk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond repute
Default Re: i got my CASA projector :)

are you going to keep the galvos or sell them?

The new galvos will come with a mounting diagram 1:1. You simply drill holes in the current aluminium plate, and screw the new galvos onto it. The two long holes where you can see two philips head screws allow you to get them lined back up with the laser.

If your not worried about damaging the current galvos, the best option would be to either heat up the plate, and the glue will dissovle, or use a liquid like acetone to dissolve the glue. Both will ruin the galvos though, as the mirrors will get coated with crud as the glue dissolves.

Your new ones will come with mirrors though (and amps, and a power supply, and new aluminium block (but not the plate).

The second option, is to get the galvos out, measure up the plate, and put the holes in the right place on a replacement piece of aluminium. This would keep the old galvo's in tact.

Remember if you are going to replace the galvos, you'll also need to replace the galvo amps, and the power supply that goes with this, as the current ones wont be tuned to the new galvos.

At best you will get the same horrid flickering image. At worst you'll burn up your new galvos.

edit: here you go! youtube of my projector running off the FS2!


(yes I get excited and go "wow" like a stoner in the video!)
__________________
Taipan Projector: 3.5-4 W B(445nm)1.5W, G(532nm)1.5W R(637nm)1W DT30 Still building!
All solid state PJ: 1W B(462)400mw G(520)200mw R(638) 400mw DT40W (collecting bits)
Pointers: 1.0 watt "Z-Lase" - 520 nm diode by DTR attached to segelei zmax V5 Vaporizer
Gassers: Omnichrome 643 Multi Line AR/KR+ ION!!!! doing ~190mW Low hours too!
Siemens 3 mw 632nm helium neon

Last edited by vk2fro; 12-26-2010 at 02:57 PM.
vk2fro is offline   Reply With Quote
Old 12-26-2010, 03:05 PM #22
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

Quote:
Originally Posted by vk2fro View Post
are you going to keep the galvos or sell them?

The new galvos will come with a mounting diagram 1:1. You simply drill holes in the current aluminium plate, and screw the new galvos onto it. The two long holes where you can see two philips head screws allow you to get them lined back up with the laser.

If your not worried about damaging the current galvos, the best option would be to either heat up the plate, and the glue will dissovle, or use a liquid like acetone to dissolve the glue. Both will ruin the galvos though, as the mirrors will get coated with crud as the glue dissolves.

Your new ones will come with mirrors though (and amps, and a power supply, and new aluminium block (but not the plate).

The second option, is to get the galvos out, measure up the plate, and put the holes in the right place on a replacement piece of aluminium. This would keep the old galvo's in tact.

Remember if you are going to replace the galvos, you'll also need to replace the galvo amps, and the power supply that goes with this, as the current ones wont be tuned to the new galvos.

At best you will get the same horrid flickering image. At worst you'll burn up your new galvos.

edit: here you go! youtube of my projector running off the FS2!


(yes I get excited and go "wow" like a stoner in the video!)
At best the same flickering image? I want to buy new galvos to get rid of the heavy flickering.
Yes i sont care about damaging the current galvos, but the black block on the alluminium plate is stuck 100%. but i dont think thats glue...no trace of it. More like screws....but i killed the screws trying to unscrew them.(very cheap ass screws). So thats why the alluminium block is pretty much useless...i need a new one. The black block where the galvos are in, is delivered with the new galvo set as far as i know...im looking at the spacelas.com galvos now. But i think every manufactor delivers other stuff with it?
I already managed to unscrew the alluminium plate of the casing, but it still leaves the galvo block on the plate, no way to remove it...
And what can i ask for those old cheap ass crap galvos anyway?

Thanks i hope you can be my guidesman

Edit: that video looks good you have the ild file?
Or does fs2 not create ild files?

I wanna try that show first when i have ild sos and my riya dac.
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.

Last edited by borgqueenx; 12-26-2010 at 03:09 PM.
borgqueenx is offline   Reply With Quote
Old 12-26-2010, 03:40 PM #23
vk2fro's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Sydney, Australia
Posts: 1,154
Rep Power: 57
vk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond repute
vk2fro vk2fro is offline
Class 3R Laser
vk2fro's Avatar
 
Join Date: Nov 2009
Location: Sydney, Australia
Posts: 1,154
Rep Power: 57
vk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond reputevk2fro has a reputation beyond repute
Default Re: i got my CASA projector :)

No it is not in ILD file format.

I am still using laser controller that came with my projector until I get pangolin FB3 and the QS software.

since you have a riya dac coming, WAIT for that before you do anything aside from replacing that dichro that got broken. Chances are, once you have the DAC, you can force all the lasers on, get that dichro lined up and get much better image quality/less flickering when its controlled with a PC. Chances are you wont, but its worth a shot.

If your not happy with the image and if you dont care for the cheap galvos, mabye since they are cheapass screws, they will drill out easily. Alternative, you can get a revese bit that you put in your drill and put the drill into reverse. It will drill into the screw, bite into it and back it out. What they PROBABLY did was use loctite!

When you buy a set of galvos, you usually get:
2 x galvos
The black aluminium block the galvos mount into
A set of scanner amps (one per galvo)
A power supply (to drive the amps)
All the interconnecting cables
Sometimes an ILDA breakout board (the set you picked comes with one)
And sometimes a cheap and nasty DMX board, which is what we both got in our projectors. I can upload patterns into mine via sd card but it still flickers like mad.

Galvos are numbered. You'll have a number on the galvo plug, and a number on the scanner amp. (or an X and a Y). You connect the galvo with one number to the amp with the same number. That way as they come tuned usually from the factory, they should work fairly nicely out of the box.

I would wait until you have the results of the paypal dispute and the riya dac test before you go drilling anything. Sounds like your happy to toss the cheap galvos and fit those spacelas units, but I'd wait until you know the outcome, as that way you can instead of messing around with the bad projector, put the original money (i.e. refund) plus the extra you would have spent on new galvos into a nicer projector. If you get stuck with the current projector, it will be a great learning curve into upgrading one.

I'm personally keeping mine as is; I am happy having it as my home show projector for checking out shows. When I do a friends party for example, I'll take my big homebuild one which is still just plans at the moment, and turn it down to a power level suited to the party.

I wish you the best of luck with the project which ever way you choose to go, and will try to help out as best as i can

edit: what I meant by getting the same flickering is if you were to just replace the galvos. Replacing the galvos amps and galvo power supply with the new set will diminish the flickering a LOT.

Cheers
Ben
__________________
Taipan Projector: 3.5-4 W B(445nm)1.5W, G(532nm)1.5W R(637nm)1W DT30 Still building!
All solid state PJ: 1W B(462)400mw G(520)200mw R(638) 400mw DT40W (collecting bits)
Pointers: 1.0 watt "Z-Lase" - 520 nm diode by DTR attached to segelei zmax V5 Vaporizer
Gassers: Omnichrome 643 Multi Line AR/KR+ ION!!!! doing ~190mW Low hours too!
Siemens 3 mw 632nm helium neon
vk2fro is offline   Reply With Quote
Old 12-26-2010, 04:36 PM #24
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

those screws wont drill out easily
I tried screwing them off but the metal breaks. its not really in the condition to be screwed out anymore.

So i need a new breadboard of the same dimension, and i dont know the name of the liquid stuff you mentioned. is it something toxic that bites through the glue and kills it? that would be a good solution for the dichro glue.

EDIT: just used my butane lighter, it "cooks" the glue, and makes it go away slowly i think. it doesnt smell really healthy so i quit and will try again tommorow if i can find something to prevent me from breathing that shit.

anyone knows where i can buy a new broadplate? or whatever the name of the allumnium plate is?

about the paypal dispute: i probaly get some money back for all the shit that happened. i cant ship it back.
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.

Last edited by borgqueenx; 12-26-2010 at 04:49 PM.
borgqueenx is offline   Reply With Quote
Old 12-26-2010, 05:07 PM #25
KGB_Productions's Avatar
Class 2M Laser
 
Join Date: Dec 2008
Location: New Orleans
Posts: 878
Rep Power: 232
KGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond repute
Send a message via AIM to KGB_Productions Send a message via MSN to KGB_Productions
KGB_Productions KGB_Productions is offline
Class 2M Laser
KGB_Productions's Avatar
 
Join Date: Dec 2008
Location: New Orleans
Posts: 878
Rep Power: 232
KGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond reputeKGB_Productions has a reputation beyond repute
Send a message via AIM to KGB_Productions Send a message via MSN to KGB_Productions
Default Re: i got my CASA projector :)

PS- DONT get those o-like dichro mounts. They are crap, no better than what you have now. You need REAL adjustable mounts. Check these out, they don't get much cheaper... Lasershow Parts - 3-Axis Fine Adjustable Optics Mount with 25mm Window

If you get any other style of mount you are just wasting your money.
__________________
10W RGB DT40-Pro
2x 5W RGB DT40 Pro
2x 4W RGB DT40 WIDE
2x 1W Green DT40 Pro
QM.net
2x FB3
Pangolin LivePro
Pangolin Beyond
Pangolin QuickShow
*********
Lab Style Lasers
2x Kvant 1W 640nm-- 3x CNI 1.5W 532-- 5x Laserwave 1.5W 532-- 2x 1.3W 445nm-- 2x RB 2W
Pointers
750mw 445nm*160mw 405nm * 200mw DX Green ~ 15mw Pulsed Green * 200mw DX Red *

KGBLASERS.COM
KGB_Productions is offline   Reply With Quote
Old 12-26-2010, 05:58 PM #26
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

Quote:
Originally Posted by KGB_Productions View Post
PS- DONT get those o-like dichro mounts. They are crap, no better than what you have now. You need REAL adjustable mounts. Check these out, they don't get much cheaper... Lasershow Parts - 3-Axis Fine Adjustable Optics Mount with 25mm Window

If you get any other style of mount you are just wasting your money.
and those wont come with mirrors....is the 135 dollar set there everything complete?
thats just not possible, there has to be a cheaper way.
I will try to buy adjustables, but i wont spend that much.
il look for other adjustables.

35 dollar is good but i want the mirrors as well.
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.
borgqueenx is offline   Reply With Quote
Old 12-26-2010, 09:36 PM #27
Grix's Avatar
Class 3R Laser
 
Join Date: Dec 2008
Location: Norway
Posts: 2,201
Rep Power: 3766
Grix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond repute
Grix Grix is online now
Class 3R Laser
Grix's Avatar
 
Join Date: Dec 2008
Location: Norway
Posts: 2,201
Rep Power: 3766
Grix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond repute
Default Re: i got my CASA projector :)

Buy the o-like dichros with them.
Grix is online now   Reply With Quote
Old 12-26-2010, 10:08 PM #28
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

Quote:
Originally Posted by Grix View Post
Buy the o-like dichros with them.
It seems they dont fit together...in sizes...
Any other cheap suggestions?
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.
borgqueenx is offline   Reply With Quote
Old 01-09-2011, 11:43 AM #29
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

update: for the first time i used smoke in the room and started my projector.

i am totally in love and im sure this will be my hobby
even with the crappy preprogrammed show.
Wow how great all the beams are... wow... (L)
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.
borgqueenx is offline   Reply With Quote
Old 01-09-2011, 12:48 PM #30
Grix's Avatar
Class 3R Laser
 
Join Date: Dec 2008
Location: Norway
Posts: 2,201
Rep Power: 3766
Grix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond repute
Grix Grix is online now
Class 3R Laser
Grix's Avatar
 
Join Date: Dec 2008
Location: Norway
Posts: 2,201
Rep Power: 3766
Grix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond repute
Default Re: i got my CASA projector :)

So you fixed the dichros?
Grix is online now   Reply With Quote
Old 01-09-2011, 03:37 PM #31
borgqueenx's Avatar
Class 3R Laser
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
borgqueenx borgqueenx is offline
Class 3R Laser
borgqueenx's Avatar
 
Join Date: Jun 2008
Location: Netherlands
Posts: 1,664
Rep Power: 183
borgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond reputeborgqueenx has a reputation beyond repute
Send a message via MSN to borgqueenx
Default Re: i got my CASA projector :)

Quote:
Originally Posted by Grix View Post
So you fixed the dichros?
No i am going to do that the 30th at a mini laser meeting of dutch hobbyists.
I only watched at the green laser, directly beaming at the galvos.

The 30th i will upgrade the galvos and install new quality 3d dichro's.
__________________
Me against China: I have a LPM and i'm not afraid to use it!

My Photonic Collection:
600mW 532nm Jetlaser Pointer(Peak 667mW)
2.5W RGB Projector
6,9W 445nm Burning Monster.
borgqueenx is offline   Reply With Quote
Old 01-09-2011, 04:20 PM #32
Grix's Avatar
Class 3R Laser
 
Join Date: Dec 2008
Location: Norway
Posts: 2,201
Rep Power: 3766
Grix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond repute
Grix Grix is online now
Class 3R Laser
Grix's Avatar
 
Join Date: Dec 2008
Location: Norway
Posts: 2,201
Rep Power: 3766
Grix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond reputeGrix has a reputation beyond repute
Default Re: i got my CASA projector :)

Oh k. Yes, I remember the first time I watched a projector. Mesmerizing, isn't it?

But now you will want to buy more and more, better and better.. Run, before it's too late!
Grix is online now   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On











Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 03:43 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC