hakzaw1
0
- Joined
- Apr 2, 2009
- Messages
- 10,662
- Points
- 113
sorry if this is a noob question but...
If a mini projector is never making anything over the MPE does that mean it requires no variance to use for scanning the dance floor in a club-??
A local club owner has asked me advice.--
These are now as cheap as 20$ (AixiZ sez they made WAY too many and the supply of them is HUGE in China and they are not selling fast enough thus the big discount over what there ere a year or so ago)- they have about 60mW of red650 and maybe 30 mw of 532. The gratings never stop moving (expeet if the dc stepper keep quits working)and the beam has been divided hundreds of times. On sound response mode they TTL blank off and on.- but when they are on ON the gratins are moving- some have a control for this from slow to fast- but he could just set then for fast when installing and IMo that makes they a little safer.
He wants to do a perm install of these( 6 to 8 of them) and likes lasers better then LEDs-These will be about 15 feet above the dance floor- pretty much straight down.
On a side note for $20 w/free ship- These can be used in low power LUMIA (but they blinking spoils the efx IMO) Or remove the lasers,fan and drivers and run direct onto to the LUMIA glass--
Which is related to my other question- Can LUMIA be done safely onto the audience?-(other than just using lasers <5 mW)
Just the MPE part not the PJ itself-- Tim had a 'store-bought' iirc @ $600 RGB Lumia from China- IIRC at TEXLEM I in San Antonio- and here in a thread too - pretty nice kit but very DIY do-able for less$..
TY in advance for your info& opinions-- Hak
If a mini projector is never making anything over the MPE does that mean it requires no variance to use for scanning the dance floor in a club-??
A local club owner has asked me advice.--
These are now as cheap as 20$ (AixiZ sez they made WAY too many and the supply of them is HUGE in China and they are not selling fast enough thus the big discount over what there ere a year or so ago)- they have about 60mW of red650 and maybe 30 mw of 532. The gratings never stop moving (expeet if the dc stepper keep quits working)and the beam has been divided hundreds of times. On sound response mode they TTL blank off and on.- but when they are on ON the gratins are moving- some have a control for this from slow to fast- but he could just set then for fast when installing and IMo that makes they a little safer.
He wants to do a perm install of these( 6 to 8 of them) and likes lasers better then LEDs-These will be about 15 feet above the dance floor- pretty much straight down.
On a side note for $20 w/free ship- These can be used in low power LUMIA (but they blinking spoils the efx IMO) Or remove the lasers,fan and drivers and run direct onto to the LUMIA glass--
Which is related to my other question- Can LUMIA be done safely onto the audience?-(other than just using lasers <5 mW)
Just the MPE part not the PJ itself-- Tim had a 'store-bought' iirc @ $600 RGB Lumia from China- IIRC at TEXLEM I in San Antonio- and here in a thread too - pretty nice kit but very DIY do-able for less$..
TY in advance for your info& opinions-- Hak