LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Small 90mw Build
- Thread starter Mosc007
- Start date
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,685
- Points
- 113
Nice little unit. You can carry that guy anywhere. 90mw's of 532nm's is nice. It's more real green than the 520nm. Bet it's real bright for the size. Enjoy that puppie. 
Last edited:
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
Looks like a nice little build!
Vision
2
- Joined
- Jan 30, 2016
- Messages
- 392
- Points
- 28
Nice build. I like the look of steel.
- Joined
- Oct 14, 2012
- Messages
- 6,090
- Points
- 113
You can't go wrong with those small stainless hosts, they always look good! :yh:
- Joined
- Dec 15, 2014
- Messages
- 6,782
- Points
- 113
Hi
That is nice and compact gives me an idea for an520 SM copper sink and
Knob
Rich
That is nice and compact gives me an idea for an520 SM copper sink and
Knob
Rich
- Joined
- Sep 20, 2013
- Messages
- 17,416
- Points
- 113
Love the look of the host. You could have increased the output power on that module if you just heat sink the output transistor on the driver board. Then you can turn the pot CCW to increase the power. But, 90 mW is fine for this kind of pointer.
- Joined
- Jul 10, 2015
- Messages
- 9,900
- Points
- 113
Very nice.
I still love high quality beam lasers that the user can enjoy without drawing a lot of attention, 90mw of 532 is enjoyable and looks bright until you set a bigger laser next to it, but why do that, enjoy it as it is, 90mw of 532 looks good.
p.s. I still love the 650nm - 660nm reds of about 200mw, they are such a beautiful color and like the dpss 532 they make a good beam.
I still love high quality beam lasers that the user can enjoy without drawing a lot of attention, 90mw of 532 is enjoyable and looks bright until you set a bigger laser next to it, but why do that, enjoy it as it is, 90mw of 532 looks good.
p.s. I still love the 650nm - 660nm reds of about 200mw, they are such a beautiful color and like the dpss 532 they make a good beam.
Last edited:
I really do like this little thing. Very nice beam and not to powerfull as to cause a menice.
I have a Nubm44 on order. Don't know what the hell I can do with that other than admire the technology. Most of the fun will be building the host for it. Will be a Lab Style. Probably from a 50x50x100 Block of Ally with Fins and Forced cooling.
I have a Nubm44 on order. Don't know what the hell I can do with that other than admire the technology. Most of the fun will be building the host for it. Will be a Lab Style. Probably from a 50x50x100 Block of Ally with Fins and Forced cooling.
- Joined
- Jul 10, 2015
- Messages
- 9,900
- Points
- 113
Are you going to use a cylindrical pair for correction of that rapidly diverging axis?
For a desktop burner you don't need it, but to project a halfway decent beam it will sure help.
For a desktop burner you don't need it, but to project a halfway decent beam it will sure help.
The 100mw was an old one I had lying around. Not sure were i bought it. I did buy a 200mw from laserlands recently but it was faulty and a full refund supplied. The Jayrob Host I purchased from him recently.
I will see what the beam looks like on the Nubm44 when I get it built. Can it be worse than the Mitsi multimode 638 ?.. It has a super wide beam at distance, Much wider than my M140.
I will see what the beam looks like on the Nubm44 when I get it built. Can it be worse than the Mitsi multimode 638 ?.. It has a super wide beam at distance, Much wider than my M140.
Last edited:
Ok, also glad you got a total refund form laserlands, which come to think of it, wasn't it you that they first offered a measly $10
Yes though my NUM44 has a wide diverange and that rectangle spot but i'm limited into how much throw room I have so I use it for up close burning. Ok as you know a 3 element helps a bit and at a potential of 7W's with a G2, 6W's or so with the 3 element is sure plenty.
I had mine set at 4A and still almost 6W is way over kill, to me anyways. Whether you use it at is or with beam expanders, or don't use it much as its way too strong, it sure is a nice diode to have in your collection
Yes though my NUM44 has a wide diverange and that rectangle spot but i'm limited into how much throw room I have so I use it for up close burning. Ok as you know a 3 element helps a bit and at a potential of 7W's with a G2, 6W's or so with the 3 element is sure plenty.
I had mine set at 4A and still almost 6W is way over kill, to me anyways. Whether you use it at is or with beam expanders, or don't use it much as its way too strong, it sure is a nice diode to have in your collection
Last edited:
Yep, That was me. First they sent a 150mw instead of 200mw. That's when they offered a $10 refund. But after I checked it with my LPM it peaked at 50mw for about a sec then dropped to 25mw. After showing the graph they did a full refund.
The Nubm44 is so dam dangerous I may not do much with it other than have fun building it. Will wait and see.
The Nubm44 is so dam dangerous I may not do much with it other than have fun building it. Will wait and see.
Last edited:
Its the difference of maby igniting a fire on a popsicle stick with the M140 and turning that popsicle stick to insatant charcoal with the NUM44
As we speak i'm thinking "RedCowBoy's" juices are flowing so i'm sure he's chiming in again:beer:
As we speak i'm thinking "RedCowBoy's" juices are flowing so i'm sure he's chiming in again:beer:
Last edited:
