LPF Laser Pointer Company Database








Welcome to Laser Pointer Forums! If you are looking for a laser you may want to check out the database of laser pointer companies. The link will open in a new window for your convenience.

Green Laser Pointers Blue Laser Pointers Red Laser Pointers
Yellow Laser Pointers Violet Laser Pointers Orange Laser Pointers
Laser Pointers by Power - 1 Watt+ Laser Pointers by Power - 500mW+ Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes


























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Green Lasers

LPF Database of Laser Pointer Companies






Reply
 
LinkBack Thread Tools Display Modes
Old 09-20-2016, 09:25 PM #1
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default ndg7475 build question?

I'm planning on a build with a ndg7475, dtr's tests say that it can run up to 2.8 amps, was wondering if anyone has made a build running that diode that hot? Its going into a fairly large copper heat sink so hopefully she'll like it there?


__________________
My collection,adding to👍

Last edited by BobMc; 09-20-2016 at 09:26 PM.
BobMc is online now   Reply With Quote








Old 09-20-2016, 09:38 PM #2
Lifetime17's Avatar
Class 3R Laser
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,163
Rep Power: 1913
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Lifetime17 Lifetime17 is offline
Class 3R Laser
Lifetime17's Avatar
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,163
Rep Power: 1913
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Default Re: ndg7475 build question?

Hi BM,
No the 7875 runs at 2.4A tops.. It's a 9mm diode and if you lucky you may get 3W's plus if it's a good one.. Buddy....DTR sells drivers already set to 2.4A in a X Dirive or a SXD

Sorry BM oops wrong diode but not far off on the Amp's Both can take 2.4A tops

Rich

Last edited by Lifetime17; 09-21-2016 at 04:31 AM.
Lifetime17 is offline   Reply With Quote
Old 09-20-2016, 09:49 PM #3
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by Lifetime17 View Post
Hi BM,
No the 7875 runs at 2.4A tops.. It's a 9mm diode and if you lucky you may get 3W's plus if it's a good one.. Buddy....DTR sells drivers already set to 2.4A in a X Dirive or a SXD

Rich
I think were talking about different diodes the ndg 7475 is a 520nm listed as 1 watt. I think your looking at the ndb7875 which is a 3 watt 445. Not to worry I made the same mistake myself. They are real close, had to double check dtr website just to be sure. I'm liking be home for so long, do you know how much trouble I can cause at the house if I try? Life is good !!!
__________________
My collection,adding to👍

Last edited by BobMc; 09-20-2016 at 09:51 PM.
BobMc is online now   Reply With Quote
Old 09-20-2016, 09:52 PM #4
Sta's Avatar
Sta Sta is online now
Class 3R Laser
 
Join Date: Jan 2014
Location: New Jersey, USA
Posts: 1,455
Rep Power: 1812
Sta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond repute
Sta Sta is online now
Class 3R Laser
Sta's Avatar
 
Join Date: Jan 2014
Location: New Jersey, USA
Posts: 1,455
Rep Power: 1812
Sta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond reputeSta has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by BobMc View Post
I'm planning on a build with a ndg7475, dtr's tests say that it can run up to 2.8 amps, was wondering if anyone has made a build running that diode that hot? Its going into a fairly large copper heat sink so hopefully she'll like it there?
Don't push the 7475 over 2.4A, you risk shortening its life. I keep mine set right at 2.4A and get a nice ~1400mW. A diode as expensive as the 7475 shouldn't be abused ayways.
__________________

YouTube - Starmute VII



405nm "5mW" eBay pen, 50mW 'bottle' pointer, 450mW lmlaser
445nm 2W SF-501B
450nm 7W NUBM44 Revan lightsaber build, 10mW pointer, 50mW lmlaser
457nm 100mW LaserBTB HL
457.9nm JDSU 2214-40MLA
462nm "1.6W" Arcane
470nm NUBM07E S4X build
476.5nm JDSU 2214-40MLA
488nm JDSU 2214-40MLA
496.5nm JDSU 2214-40MLA
501.7nm JDSU 2214-40MLA
513nm 50mW in Thor host
514.5nm JDSU 2214-40MLA
520nm 200mW SF501B
525nm 1.4W S4X build
527nm primary DPSS (301)
532nm 500mW XPL-H, 2x gearbest, 9-line 301, 35mW lmlaser
537nm secondary DPSS (4x)
542nm secondary DPSS (2x)
543.5nm Gammex alignment HeNe
547nm secondary DPSS
583.8nm Spartan mid-cold line
586.2nm Spartan cold line
589.2nm 120mW PGL-III-C, unique DL Spartan (7+ lines) 162mW!
591nm Spartan cold line
593.5nm LaserGlow Rigel-6; Spartan cold line
637nm 90mW DL Spartan
638nm 600mW XPL-310
650nm "100mW" (3x), 650nm "5mW" eBay pen
660nm 5mW pointer
685nm 15mW laserlands module

In transit:
473nm 100mW PL-E Pro
632.8nm 20mW JDSU HeNe, 20mW Lasos HeNe

Sta is online now   Reply With Quote
Old 09-20-2016, 09:58 PM #5
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by Sta View Post
Don't push the 7475 over 2.4A, you risk shortening its life. I keep mine set right at 2.4A and get a nice ~1400mW. A diode as expensive as the 7475 shouldn't be abused ayways.
I've got a 7475 running at about 2.4-5 amps she's doing about 1400-500. Would like to build a pocket one and push the diode to the very max. Realize it might cut the life expectancy but I'd like to give it a go and she how she beams. By pocket I mean a host that will fit in your pocket. Will be using the same host as my post of my first build, I really like that host.
__________________
My collection,adding to👍

Last edited by BobMc; 09-20-2016 at 09:59 PM.
BobMc is online now   Reply With Quote
Old 09-21-2016, 12:02 AM #6
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,394
Rep Power: 1698
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,394
Rep Power: 1698
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by BobMc View Post
I'm planning on a build with a ndg7475, dtr's tests say that it can run up to 2.8 amps
Just to be clear I list 2.4A as the max suggested running current on the NDG7475. See the recommended current at the top of the sales page.
https://sites.google.com/site/dtrlpf...s/ndg-1w-520nm

The testing does take the diode to and past the point of foldback so you can see where the curve drops off but the last tested current is not an endorsement of where you can reliably run the diode. To get a full curve it is necessary to test past the peak of efficiency.

Last edited by DTR; 09-21-2016 at 12:03 AM.
DTR is online now   Reply With Quote
Old 09-21-2016, 12:18 AM #7
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by DTR View Post
Just to be clear I list 2.4A as the max suggested running current on the NDG7475. See the recommended current at the top of the sales page.
https://sites.google.com/site/dtrlpf...s/ndg-1w-520nm

The testing does take the diode to and past the point of foldback so you can see where the curve drops off but the last tested current is not an endorsement of where you can reliably run the diode. To get a full curve it is necessary to test past the peak of efficiency.
I'm confused??? according to your testing the 7475 keep building till 2.8 amps putting out 1.554 watts. Am I missing something here? I am new to this hobby but was wondering where exactly the peak would be. Am I not reading the pictures correctly? I realize 2.4 amps is recommended and safer, but if it's still building than it's not at the peak. What am I not seeing or understanding??? thanks
__________________
My collection,adding to👍

Last edited by BobMc; 09-21-2016 at 12:39 AM.
BobMc is online now   Reply With Quote
Old 09-21-2016, 12:54 AM #8
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,394
Rep Power: 1698
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,394
Rep Power: 1698
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: ndg7475 build question?

What is key in the power test is the efficiency mW out per mA in and when you get to the point of diminishing returns where the efficiency starts to drop off sharply(foldback) that is a dangerous area to run the diode. Past 2.4A you are getting less and less return for the same increases in power which will result is a less stable output as heat builds up quickly and if it can not be removed from the diode quick enough this bottleneck of heat will cause a rapid drop in power output and quicken the rate of degradation shortening the life of the diode.
DTR is online now   Reply With Quote
Old 09-21-2016, 12:58 AM #9
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by DTR View Post
What is key in the power test is the efficiency mW out per mA in and when you get to the point of diminishing returns where the efficiency starts to drop off sharply(foldback) that is a dangerous area to run the diode. Past 2.4A you are getting less and less return for the same increases in power which will result is a less stable output as heat builds up quickly and if it can not be removed from the diode quick enough this bottleneck of heat will cause a rapid drop in power output and quicken the rate of degradation shortening the life of the diode.
Ok, now that explains things a lot! gotcha.Thanks, ok will be ordering a 7475 with a copper module with a halfback and a g2 lens here shortly thanks for the help !! really!
__________________
My collection,adding to👍
BobMc is online now   Reply With Quote
Old 09-21-2016, 01:42 AM #10
Pman's Avatar
Class 3B Laser
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,292
Rep Power: 2614
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Pman Pman is online now
Class 3B Laser
Pman's Avatar
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,292
Rep Power: 2614
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Default Re: ndg7475 build question?

You also have more of a possibility of it blowing on startup surge but it's all part of the "game". I have no idea what you would gain with a 520nm by pushing into foldback. If you were talking about a 462 or 465nm diode it would be more meaningful especially with the 07E. What I'm saying is why would you want a 520nm to be higher in wavelength.
Good for you on choosing what I would consider to be the best high power 520nm diode Bob. If you dont have an 07E yet you are in for a treat if you go that route next. Now that's a great diode 5hats worth driving at different outputs. Not only is it really powerful if that's something you are after but it's also very bright and beautiful and not as expensive but to be fair, that 520nm cost a fortune when DTR first started selling it so you are getting quite the bargain with it compared to what a lot of us paid
Happy building and be sure to share it with us While you are at it you should get another lens to help tame the divergence as it's not much more $ and you grow to appreciate good divergence.
__________________
I'm not strange, I'm limited edition!

*Jayrob Star Trek Phaser*
# of Lasers - ***
# of DTR/510 laser adapters *
# of eGo/510 mods **
# of Batteries - ***
Wavelengths - 405, 445, 447, 450, 455, 462, 464, 470, 473, 473+, <515, 515, 520, 532, 589, 635, 638, 650, 660, 685, 808, 830, 980
Projector - PD2
O-Like mini red/green to yellow module
Beam Expanders - Dragon Lasers 2x & 5x with universal adapters
LPM's - Modified AW TEC, Custom 6.8W+ Ophir
Datalogger - ARG
Chargers - Ultrafire WF139, (2) Xtar WP2, Nitecore i2, UM20, (3) i4, (2) D4 , Opus BTC-3400 V2.2
Phlatlights - Jayrob PT-54 green 1000lm maglight, PT-54 red project box build, (3) PT-54 red, (2) PT-54 orange (3) PT-121 red, (2) PT-121 blue, (1) PT-121 green project work in progress 5000lm (1) PT-121 green

Links:

**"Pen Laser Thread"**
"Post your pics of unique builds no-one else has"
"Make your way overspec $5 pen focusable"
"Share your inexpensive builds thread"
"Pman special"

Last edited by Pman; 09-21-2016 at 01:45 AM.
Pman is online now   Reply With Quote
Old 09-21-2016, 02:48 AM #11
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by Pman View Post
You also have more of a possibility of it blowing on startup surge but it's all part of the "game". I have no idea what you would gain with a 520nm by pushing into foldback. If you were talking about a 462 or 465nm diode it would be more meaningful especially with the 07E. What I'm saying is why would you want a 520nm to be higher in wavelength.
Good for you on choosing what I would consider to be the best high power 520nm diode Bob. If you dont have an 07E yet you are in for a treat if you go that route next. Now that's a great diode 5hats worth driving at different outputs. Not only is it really powerful if that's something you are after but it's also very bright and beautiful and not as expensive but to be fair, that 520nm cost a fortune when DTR first started selling it so you are getting quite the bargain with it compared to what a lot of us paid
Happy building and be sure to share it with us While you are at it you should get another lens to help tame the divergence as it's not much more $ and you grow to appreciate good divergence.
Thanks Pman, I just ordered a ndg7475 witha g2 in a 12mm module with a half back from dtr. I don't have a 07e build but I have an 06 build, that's the diode in my "first build" post. How much difference is there between an 06 and a 07e?. Also I ordered a g2 lens with the 7475, which lens would you recommend ? I talked to dtr he explained the "why" not to overdrive a diode, it's information that I needed. So I'm going to have the driver set at 2.4 amps.Thanks:::::::::::::: Edit: I just looked on dtr's website and couldn't find an 07e found an 06 and a 08,is the 08 the new version?
__________________
My collection,adding to👍

Last edited by BobMc; 09-21-2016 at 02:55 AM.
BobMc is online now   Reply With Quote
Old 09-21-2016, 04:10 AM #12
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,394
Rep Power: 1698
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,394
Rep Power: 1698
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: ndg7475 build question?

It is on the way.

Here is the NUBM07
https://sites.google.com/site/dtrlpf...nm-laser-diode
DTR is online now   Reply With Quote
Old 09-21-2016, 04:31 AM #13
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by DTR View Post
It is on the way.

Here is the NUBM07
https://sites.google.com/site/dtrlpf...nm-laser-diode
Thanks, and I might just have found my next build!!!!! 👍
__________________
My collection,adding to👍
BobMc is online now   Reply With Quote
Old 09-22-2016, 03:55 PM #14
Pman's Avatar
Class 3B Laser
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,292
Rep Power: 2614
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Pman Pman is online now
Class 3B Laser
Pman's Avatar
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,292
Rep Power: 2614
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Default Re: ndg7475 build question?

As far as difference I would say night and day. When you get into all the blues from 445nm-465nm there is a very visible difference between them and I consider the 07E to be the standout of the group. The 07 can be anything from a lighter blue to almost teal depending upon luck of the draw on where your particular diode is on the spectrum and how it reacts to being pushed beyond manufacturers data sheet. DTR doesn't bin his diodes so you never know what you are going to get.
I currently own 3 07E builds from 4.5-5.5A and I found that my 5A one actually has more green in it than the 5.5A one. If you want just a great sky blue don't push it too hard and run it from 4-4.5A. Once you get beyond 4.5A depending upon the diode the color starts to look different than a sky blue. Personally I'm tempted to change the driver on the 5A one to a 5.5A and see just how far that one will push with more green. This is something I wouldn't tell someone else to do unless they can handle a potential diode loss. What's more interesting is to get one first and not push it and then build another and see what it will do. I will likely be buying another one as I have a project that I'll be working on with someone else using them once the parts all come together.

Take a look here at the 5A 07E build I made and pay particular attention to the beam shots after it got darker as the teal color is starting to really show. Look at the comparison shots and you will get a better idea how the color changes. It's more than the camera shows but you get the general idea. I will say that the wavelength difference looks better on my phone than my netbook so if you have more than one way to look at the pics its better to try more than one.
5W 07E 471nm? build
__________________
I'm not strange, I'm limited edition!

*Jayrob Star Trek Phaser*
# of Lasers - ***
# of DTR/510 laser adapters *
# of eGo/510 mods **
# of Batteries - ***
Wavelengths - 405, 445, 447, 450, 455, 462, 464, 470, 473, 473+, <515, 515, 520, 532, 589, 635, 638, 650, 660, 685, 808, 830, 980
Projector - PD2
O-Like mini red/green to yellow module
Beam Expanders - Dragon Lasers 2x & 5x with universal adapters
LPM's - Modified AW TEC, Custom 6.8W+ Ophir
Datalogger - ARG
Chargers - Ultrafire WF139, (2) Xtar WP2, Nitecore i2, UM20, (3) i4, (2) D4 , Opus BTC-3400 V2.2
Phlatlights - Jayrob PT-54 green 1000lm maglight, PT-54 red project box build, (3) PT-54 red, (2) PT-54 orange (3) PT-121 red, (2) PT-121 blue, (1) PT-121 green project work in progress 5000lm (1) PT-121 green

Links:

**"Pen Laser Thread"**
"Post your pics of unique builds no-one else has"
"Make your way overspec $5 pen focusable"
"Share your inexpensive builds thread"
"Pman special"
Pman is online now   Reply With Quote
Old 09-23-2016, 02:52 PM #15
BobMc's Avatar
Class 2 Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 2 Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 374
Rep Power: 978
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: ndg7475 build question?

Quote:
Originally Posted by Pman View Post
As far as difference I would say night and day. When you get into all the blues from 445nm-465nm there is a very visible difference between them and I consider the 07E to be the standout of the group. The 07 can be anything from a lighter blue to almost teal depending upon luck of the draw on where your particular diode is on the spectrum and how it reacts to being pushed beyond manufacturers data sheet. DTR doesn't bin his diodes so you never know what you are going to get.
I currently own 3 07E builds from 4.5-5.5A and I found that my 5A one actually has more green in it than the 5.5A one. If you want just a great sky blue don't push it too hard and run it from 4-4.5A. Once you get beyond 4.5A depending upon the diode the color starts to look different than a sky blue. Personally I'm tempted to change the driver on the 5A one to a 5.5A and see just how far that one will push with more green. This is something I wouldn't tell someone else to do unless they can handle a potential diode loss. What's more interesting is to get one first and not push it and then build another and see what it will do. I will likely be buying another one as I have a project that I'll be working on with someone else using them once the parts all come together.

Take a look here at the 5A 07E build I made and pay particular attention to the beam shots after it got darker as the teal color is starting to really show. Look at the comparison shots and you will get a better idea how the color changes. It's more than the camera shows but you get the general idea. I will say that the wavelength difference looks better on my phone than my netbook so if you have more than one way to look at the pics its better to try more than one.
5W 07E 471nm? build
Wow! There's a lot of color difference ! Makes me think about getting a 07 and seeing if I can wire in a potentiometer to be able to change current/color on the fly. Got me thinking Pman!! Thank's I love it!��
__________________
My collection,adding to👍

Last edited by BobMc; 09-23-2016 at 04:08 PM.
BobMc is online now   Reply With Quote
Old 10-02-2016, 12:35 AM #16
badboybilly's Avatar
Class 2 Laser
 
Join Date: Mar 2015
Location: Sydney Australia
Posts: 422
Rep Power: 778
badboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond repute
badboybilly badboybilly is online now
Class 2 Laser
badboybilly's Avatar
 
Join Date: Mar 2015
Location: Sydney Australia
Posts: 422
Rep Power: 778
badboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond reputebadboybilly has a reputation beyond repute
Default Re: ndg7475 build question?

Hi Bob
I think you will like the divergence on the high power green diode better with Jordan,s
2 element AR coated lens than the G2,
I realise you already purchased the G2 but with the multimode greens that rectangle splash around the line-ribbon is very noticeable with the G2. I personally like the 2ellements output much better with a little power loss, You should try one with your next purchase and let me know if you agree.
__________________
Initiate V4 NDG700 2a blackbuck M8 920ma 2el
Warsun Mini stainless PL515 230ma Xboost 35mw acrylic
Goread Stainless PLTB520B1 480ma Xboost 210mw G2
Coast hp14 Mod NDG700 1.8a Xdrive 950mw 2el
SL Stainless NUBMO7E 4a SXD 4w+
Coast hp14 Mod NUBMO7E 4.5a SXD 5w
Custom NDB7675 adj wavelength 2.7a blackbuck M8 2.3w
JetBeam Titanium 24k Gold Plated duel Flexdrive 2w
Tank007 Stainless BDR 206 .5a Nano 850mw
Sigelli Mec Mod BDR 209 .5a Nano 710mw
Aurora sh-032 SF-BW512 .5a Nano 700mw
Custom volt panel build NUBM47-A1 5a SXD 7w Gball
XM-L T6 NUBM47-A1 5a SXD 7w
LedLenser P7.2 NUBMO6 3a SXB 3w
Kryton Groove NDB7875 2.4a Blitzbuck 2.9w
Aluminium host NDB7875 2.4a Xdrive 2.8w
Coast HP7 NDB7875 1.8a Xboost v7 2w
Xplorer stainless mini NDB7875 1.8a Xboost 2.2w
UltraFire Stainless A140 1.2a boost driver 1w
Thor Aluminium Ebay M140 1.5a Buck driver 1.6w
Mini Stainless M140 1.8a Xboost 1.9w
Mini Stainless PL450B 300ma Xboost 80mw acrylic
Caravela Mod Brass Mitts 500 1.4a FlexdriveV5 1.36w
Gus Mod Stainless Mitts 500 1.4a AMC 5 mode 1w
Sec g7-L2 SS opnext-HL63603TG 190ma Linear 150mw
badboybilly is online now   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On











Loading








Top 50 Laser Pointer Companies - Green Lasers Top 50 Laser Pointer Companies - Blue Lasers Top 50 Laser Pointer Companies - Red Lasers
Top 50 Laser Pointer Companies - Yellow Lasers Top 50 Laser Pointer Companies - Purple Lasers Top 50 Laser Pointer Companies - Orange Lasers
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes




Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 06:03 AM.


Powered by: vBulletin
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2016 Laser Pointer Forums, LLC