Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Help with the laser rated for usage with 3.7 volatge

Joined
Sep 14, 2010
Messages
50
Points
0
i have ordered a rayfoss laser that uses 3.7 volt batteries
cr123 and 18650 until i receive my proper batteries which are in the mail and supposed to arrive in ten days can i use the cr123 3.0v battery without damaging the laser?
 





Joined
Mar 26, 2010
Messages
3,220
Points
0
Undervoltage shouldn't hurt anything. But the laser probably won't work very well either. 3.0V on a li-ion means it's time to recharge. It'd be like running the laser with a dead battery.
 
Joined
Sep 14, 2010
Messages
50
Points
0
great because i really wanna use the laser i can not wait for the batteries to arive:) ps for how long do you charge 3.0
 

Toke

0
Joined
Jul 25, 2010
Messages
1,099
Points
0
I don't think 3V will be a problem.
A green module will run fine on 3V, and no other laser will work properly on just one 3,7V without a boost driver.

There would be a problem if it was two 3,7V batteries, then you might have a linear driver, that would work with 7,2V but not 6V.
 
Joined
Feb 5, 2008
Messages
6,252
Points
83
You cannot fry a laser if you use lower voltage then reccomended.

You can mosts certanly try out your laser now.

Qumefox, 3.0V cell is usually pile lithium, can also be rechargeable with cycle of max 3.7V and minimum 2.0 V, unlike lithium ion cells 4.2 - 2.7 V.
 
Joined
Sep 14, 2010
Messages
50
Points
0
well i bought this no name lion cr123 and 1000mah
im wandering could i put it in :) you confused me with the qumefox thing...
ps i allready got the 3.7 v charger can i charge this battery in that charger...and for how long cause the battery charging stops when it charges a 3.7 battery ?
 
Last edited:
Joined
Mar 26, 2010
Messages
3,220
Points
0
You cannot fry a laser if you use lower voltage then reccomended.

You can mosts certanly try out your laser now.

Qumefox, 3.0V cell is usually pile lithium, can also be rechargeable with cycle of max 3.7V and minimum 2.0 V, unlike lithium ion cells 4.2 - 2.7 V.

It was my understanding that rechargable cr123a's were really li-ions. 16340's to be exact.

*edit* nvm. google tells me the 3v ones are LiFePO4's.
 
Last edited:
Joined
Sep 14, 2010
Messages
50
Points
0
hmm today i realised there are also 17650 batteries can they be used as a substitute for 18650 provided they are the right size 3.7 voltage?
 
Joined
Mar 26, 2010
Messages
3,220
Points
0
17650's are going to be slightly smaller than 18650's.. The numbers are the physical size of the battery. First two digits are diameter, next two are length, and last is form factor. therefore 18650 broken down is 18mm in diameter, 65mm long, and the 0 means it's a cylindrical battery.

A 17650 would be 1mm smaller. Probably not enough to matter, but i've also never actually seen a 17650. My guess is they're made to have protection circuits added, which generally adds 1mm to the diameter, then get sold as 18650's.
 




Top