TTerbo
0
- Joined
- May 20, 2010
- Messages
- 1,361
- Points
- 0
lets stop the thread jacking now 
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Free Offer of a 50mW Upgraded CNI-M, Focusable, for Review
- Thread starter JETLASERS
- Start date
- Joined
- Jan 15, 2008
- Messages
- 3,575
- Points
- 0
I could pass one around QC/Toronto...to various people, it would save a tons of lasers.
Anyway, im most likely already in the list for the Ti series.
Anyway, im most likely already in the list for the Ti series
.
- Joined
- Jun 22, 2010
- Messages
- 92
- Points
- 0
lets stop the thread jacking now
I already stopped, but suddenly you wanna get smart and jump in and started it up again. :wtf:
- Joined
- Jun 12, 2010
- Messages
- 892
- Points
- 0
The Ti series?
Those look amazing. The hosts approach the quality of some of Ehgemus's work.
I doubt they'd hand out those gems out for reviewing- they must be worth heaps.
Don't try to fight TTerbo or anyone else with more intellect than yourself. You'll just lose.
Those look amazing. The hosts approach the quality of some of Ehgemus's work.
I doubt they'd hand out those gems out for reviewing- they must be worth heaps.
Don't try to fight TTerbo or anyone else with more intellect than yourself. You'll just lose.
- Joined
- Jun 22, 2010
- Messages
- 92
- Points
- 0
Wow you two are some nice bed buddies. Enjoy your time together!
- Joined
- Jun 12, 2010
- Messages
- 892
- Points
- 0
- Joined
- Jan 15, 2008
- Messages
- 3,575
- Points
- 0
- Joined
- Jun 19, 2009
- Messages
- 2,710
- Points
- 0
He has every right to doubt you until you provide proof, if you want him to stop, just show him some proof.
bobhaha
0
- Joined
- May 31, 2009
- Messages
- 3,239
- Points
- 63
Guys, knock it off... leave it at that. The threads over. I was asked to review their laser, and I'm sure other people have received the privilege too.
- Joined
- Aug 5, 2010
- Messages
- 356
- Points
- 28
Hey friends,
Thanks for your time, and yes, this offer is nearly over since people here contacted me at the soonest and so, to play fair, they have "deprived" me of a upgraded CNI M model, a PL-C Green laser 150mw and a 50mW lite version Ti;
I'm sorry I couldnot offer any more at this moment. Actually, the lite version Ti has a lot to improve and the surfacing(esp. on the focusing head and tail cap) is too smooth and slippery. So let's just wait a while for the upgraded version of PL-A(see pic 1) and the first version of PL-B(see pic 2).
Pic 1:
Pic 2:
Anyway, let's wait for their reviews; good or bad, we've got a lot of work to do and long way to go. Thanks for all your kind attention! :can:
Thanks for your time, and yes, this offer is nearly over since people here contacted me at the soonest and so, to play fair, they have "deprived"
me of a upgraded CNI M model, a PL-C Green laser 150mw and a 50mW lite version Ti; I'm sorry I couldnot offer any more at this moment. Actually, the lite version Ti has a lot to improve and the surfacing(esp. on the focusing head and tail cap) is too smooth and slippery. So let's just wait a while for the upgraded version of PL-A(see pic 1) and the first version of PL-B(see pic 2).
Pic 1:
Pic 2:
Anyway, let's wait for their reviews; good or bad, we've got a lot of work to do and long way to go. Thanks for all your kind attention! :can:
Last edited:
- Joined
- Jun 22, 2010
- Messages
- 92
- Points
- 0
Agreed. I already stopped, but these guys keep coming back and provoking me. If someone starts talking crap about me, I'm not gonna sit there and just listen...
Looking forward to your review.
- Joined
- Jun 19, 2009
- Messages
- 2,710
- Points
- 0
Last edited:
bobhaha
0
- Joined
- May 31, 2009
- Messages
- 3,239
- Points
- 63
Those hosts are looking great! Can't wait to review them
Are those going to be made of the same material? Aircraft grade Al?
Are those going to be made of the same material? Aircraft grade Al?
bobhaha
0
- Joined
- May 31, 2009
- Messages
- 3,239
- Points
- 63
Are they really going to make it out of Ti?
The laser offered here, CNI M is made of, and I quote "Precision Machined From aircraft grade Al" so I'm not too sure...
The laser offered here, CNI M is made of, and I quote "Precision Machined From aircraft grade Al" so I'm not too sure...
- Joined
- Aug 5, 2010
- Messages
- 356
- Points
- 28
Hey Bobhaha, sorry for the confusion.
The CNI M model is just of the Alu host. We didnot nothing to change it. It's unnecessary.
The Ti lasers are mainly available PL-A, PL-B, Ti pen, etc.; just as the pics show, they're just the sampling hosts, no laser components within. It's being redesigned. I will sort out more PL-B pics and upload them into my albums.
PL-B costs higher than PL-A; due to the high tenacity of Ti, it's much more difficult to machine and adding "patterning" on the surface takes demanding work
We've quit partnering with the previous machinists who cannot achieve the precision we required. As you see the current laser body is too "stout", so the tube needs to be enlarged to hold a 18650 battery.
The CNI M model is just of the Alu host. We didnot nothing to change it. It's unnecessary.
The Ti lasers are mainly available PL-A, PL-B, Ti pen, etc.; just as the pics show, they're just the sampling hosts, no laser components within. It's being redesigned. I will sort out more PL-B pics and upload them into my albums.
PL-B costs higher than PL-A; due to the high tenacity of Ti, it's much more difficult to machine and adding "patterning" on the surface takes demanding work
We've quit partnering with the previous machinists who cannot achieve the precision we required. As you see the current laser body is too "stout", so the tube needs to be enlarged to hold a 18650 battery.
Last edited:
bobhaha
0
- Joined
- May 31, 2009
- Messages
- 3,239
- Points
- 63
Oh ok, makes sense. Well when they are available, I would be happy to review one for you, if you like.
