Custom Ehgumus Host/NUBM01T/Ball lens intacked

Lifetime17 · Apr 3, 2016

Hi LPF members had this host in mothballs for some time now so i thought that a nice green god should accompany the host.I want to thank Alex Barnett for this fabulous diode purchase. In it is;;;

1,- NUBM01T 520nm Diode with Ball lens In a Full CU module...

SXD Adjustable driver By Lazeerer set to 2.4A's Heat sinked IC and Heat sinked to the host body by an AL heat sink wedge 24Ga silicone Wire

Host, Custom Ehgumus Momentary top switch and a rear safety clicky.
Hope you folks like it ..

Rich

GSS · Apr 3, 2016

Talk about waiting for the "right" diode for the "right" host!! WoW is that thing pretty and well well thought out:beer:

Lifetime17 · Apr 3, 2016

Hi Gss,
Thank you very much hope everyone likes the build. I have quite a few of his hosts in stock when he was in business. This one in particular was a one of a kind that deserved the right diode, and i'm glad you think the same pal. thanks again for looking and commenting.Here are some more pics out the LPM and Beam shots...

Rich

BowtieGuy · Apr 3, 2016

Nice looking laser, Lifetime; you can't beat that 520nm wavelength, simply beautiful! :beer:
:gj:

Edit: I was wondering about the LPM results, you must have been posting them at the same time as I was.

Lifetime17 · Apr 3, 2016

Hi Bowtie,
Thank you there's nothing like a 520nm diode in a beautiful host. Thank you for your compliment and for checking out my stuff. Some of the units you build are really Epic so to speak you got that Buddy..

Rich

Pman · Apr 3, 2016

Wondering when you would post another build

Another beautiful green. REP when I can.

Lifetime17 · Apr 3, 2016

Hi Pman,
Thanks for looking buddy i been stocking up on material still waiting for 22 drivers so all i can do is buy diodes now. I have some stuff but most is for high power builds. And have some single modes 450's and 520's for some pen builds .plenty of 660 and 638's. I thought this diode should be justified in this host. Sure wish all these guys were still around for these awesome hosts

Thanks Buddy...

Rich

RedCowboy · Apr 3, 2016

WOW, That looks good.
And that Gball beam is CLEAN!
:gj:

Seriously that's the brightest looking 520 pic, there is something about those Gballs, they are super easy to remove after you put one in a full copper back module so why not try them that way, you can always pop it out with the leverage of the module wall and a small screwdriver and use a screw in lens later, it's like a free stay clean lens that is seemingly super efficient and clean, I haven't noticed the usual artifacts with mine either on my blues, just barley and in close, no flyers.

My 07E looked brighter with it's Gball but the focal point was a bit big, but my NUBM06 with it's Gball is strong and the beam looks great, much less artifacts and spot/line is half the length of a G2, sometimes the Gball is better and that 01t looks great.

Yes ABarnett can get the 01t with the Gball on at a good deal, I am thinking I want one even more after seeing yours, that beam looks good.

Isaac Clarke · Apr 3, 2016

kewl stuff

RB astro · Apr 4, 2016

Rich, what a truly beautiful build !
Well done.
+Rep when I can buddy.

RB

:beer:

Lifetime17 · Apr 4, 2016

Hi Red,
The G ball surprised me really hey if we could only collimate that beam without all the fuss that would be awesome. But for now i'mm happy with the stock lens buddy. Red i have a fe 01T's running at 1300+ with a G2, but really the g ball is very impressive to me as far as a WL aspect.the 01T's i have are decanned and thats why the reduction of 300mW's is there .hey i have two 07E's and i love the WL all over 5+W's . hey this 520 is super bright it lights up my whole gym .. Hey thank you Alex and Red you to buddy..
Rich

@ Isaac,
thank you pal it means a lot to see folks like you guys that like a good build..And chime in with your opinions well taken my brother..
Rich

Hi Rb,
thank you so much i really enjoy when folks alike check out my stuff and reply , we have such a great laser family here at LPF. It don't get any better than that my man. glad you liked my build ..

Rich

Constandinos97 · Apr 4, 2016

NUBM01T 520nm Diode with Ball lens In a Full CU module...

Wait, I'm confused. Isn't the diode's name "NUGMO1T" and not "NUBMO1T"? Because I've seen you calling it that way in another post too. Just asking to avoid unnecessary misunderstandings in the future

By the way, that's a sweet build. I bet it looks insane during the night! The host is of great quality as well. Good job! :drool:

Lifetime17 · Apr 4, 2016

Hi C,
Ok thats cool with me my man but we all got the pic ,but thank you for bringing this to my attention. mind you i deal with a lot of diodes and when i'm writing my thoughts fly 100 mile per hour. So to no further a due it' s a 520nm 1W+ diode. Hey all kidding aside thank you so much for a delightful reply my man. priceless LOL !! Love it ....

Rich

RedCowboy · Apr 4, 2016

Yes it is NUGM01t and right out of the Gball and into one of podo's 60 dollar 3x expanders I bet would be nice, especially with the NUBM06, that one should go Gball into an expander, now the 07e is set rather wide out of it's Gball, but an expander will help it a lot as well, but the NUBM06 I have likes it's Gball better than a NUBM44 likes a G2 at 5 feet and beyond.

badboybilly · Apr 4, 2016

Very Nice Lifetime17
I really enjoyed checking this out
I might try leaving the Gball in myself with the next diode I buy
I enjoy seeing good quality builds!

coletrain211 · Apr 4, 2016

What a beautiful beam!:drool: I think I remember looking at that host in one of Ehgemus's threads and thinking how much I wanted it lol.

Also, Isaac.... How are you making a handheld 561nm laser??

Custom Ehgumus Host/NUBM01T/Ball lens intacked

Lifetime17

0

Attachments

GSS

0

Lifetime17

0

Attachments

BowtieGuy

0

Lifetime17

0

Pman

0

Lifetime17

0

RedCowboy

0

Isaac Clarke

0

RB astro

0

Lifetime17

0

Constandinos97

0

Lifetime17

0

RedCowboy

0

badboybilly

0

coletrain211

0

Online statistics

Forum statistics

Share this page