Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

500mW+ Focusable Green Laser (Pointer/Lab Module)






Joined
Apr 2, 2009
Messages
10,662
Points
113
/

It would make sense to me to just get with JETLASERS China.

Shipping would be local and so cheaper..

I think you should forget the idea of converting a lab into a portable.
I get the feeling you want a laser than can run non-stop- which lab laser can do but not very likely as a portable. With shipping battery and charger you may find a JETLASER that makes more than 300mW- which is very close in brightness to a 500mW- but I would highly suggest using a duty/ rest cycle for the health of the laser-- To be on the safe side around 5 min duty and the same as rest- if you are in a cold time of the year you could use it longer or if the temperature is high then maybe a short time would be wise.
Hope this has be of help to you.

hak
 
Joined
May 17, 2013
Messages
971
Points
0
/

It would make sense to me to just get with JETLASERS China.

Shipping would be local and so cheaper..

I think you should forget the idea of converting a lab into a portable.
I get the feeling you want a laser than can run non-stop- which lab laser can do but not very likely as a portable. With shipping battery and charger you may find a JETLASER that makes more than 300mW- which is very close in brightness to a 500mW- but I would highly suggest using a duty/ rest cycle for the health of the laser-- To be on the safe side around 5 min duty and the same as rest- if you are in a cold time of the year you could use it longer or if the temperature is high then maybe a short time would be wise.
Hope this has be of help to you.

hak

but what about CNI tho?
How does CNI stack up against Jet Laser?
 
Last edited:
Joined
May 17, 2013
Messages
971
Points
0
Speaking of divergence.
What's a good divergence for a laser?
Cos so far what I've seen on 500mW+ lasers , the divergence just ranges from 1.5mrad to 2.5.
Is that good ..or
 




Top