- Joined
- Feb 4, 2010
- Messages
- 548
- Points
- 0
If you are serious about experimenting with real fog or mist i have 4 units available that i purchased some time ago for experiment with my fogdisplay - xyzdisplay prototypes. One unit i keep for myself to play with my completely redisigned prototypes. I would also be interested to exchange 1 or 2 units against a 455nm, >700mw laser pointer and 405nm, >700mw laser pointer.
These units have been used for only 5-7 hours !
Any offers welcome !
Here is the link to my prototype builds from 2003(R&D on computer) 2007-2009(using the mistmakers),...
http://laserpointerforums.com/f48/some-pictures-my-old-fogdisplay-com-holomodule-project-52760.html
And here is a link to some pictures i took with somebody playing with simple laser pointers using one 9 head mistmaker - fogger.
http://laserpointerforums.com/f48/electric-mist-50034.html
Here is some info :
An instant conversation piece. Transform your water garden into a theatrical outdoor entertaining space with colorful lights and real fog. Floating pond fogger uses ultrasonic technology to produce a perpetual rolling mist while 36 brightly colored LED lights alternate colors for a dynamic lightscape. Requires no additional equipment, plumbing, or chemicals. Easy to set up and fish safe. 11" diameter 31 ft cord, plus an additional 6 ft transformer cord.
Assembly and Operating Instructions
Always be sure to use the original transformer and only connect to the indicated electricity supply.
Place the pond fogger on the water surface and gently press on the pond fogger so it is approximately 1/2" below the water surface. Hold in place for about 30 seconds, release it and it will remain at this optimum water depth.
Connect the pond fogger to the transformer. Tighten the waterproof ring. Plug the transformer into the power source. The pond fogger will start working immediately.
General Instructions for Optimal Usage
Suggested period of use for the Super Power Pond Fogger is no more than 8 hours a day. Connecting a timer to the transformer will ensure your pond fogger is operating within the suggested time period. Placement in clean water is also recommended.
Clean the Super Pond Fogger with a soft cloth, approximately twice per month.
When cleaning the Super Pond Fogger, do not use chemical cleaners.
Maintenance and Service
Mineral deposits and scale buildup will affect the mist volume. Please clean the surface of the mist generating Membrane in the Mist Cavity with a soft cloth or a cotton swab. Do not touch or scratch the Membrane. Do not use any detergents or cleansers.
After about 30,000 hours of operation, the Membrane produces a reduced mist effect due to wear.
The Temperature Sensor Switch will automatically shut of the pond fogger when the unit is exceeds normal operating temperatures. This usually indicates it is time to clean the Copper Unit of the Mist Maker.
Disconnect the transformer from the power supply.
Open the two plastic covers using a screwdriver.
Detach the two plastic covers.
Take out the Float unit.
Clean the scale off of the Copper Unit of the Mist Maker.
Reassemble unit. Place into water and plug the transformer into the power source. The pond fogger will start working immediately.
Caution:
Use only the specified supplied transformer.
Do not put your hand above the fogger while it is operating. The high vibration could cause injury.
Disconnect power supply before removing fogger or during maintenance.
General Information
The UFO Super Power Pond Fogger with LED lights will enhance the beauty and atmosphere of any small pond or large water feature. The Super Power Pond Fogger is fish-safe and will create a mystical pond fog within seconds. Simply place the Super Power Pond Fogger into your pond or water feature and watch in marvel.
These units have been used for only 5-7 hours !
Any offers welcome !
Here is the link to my prototype builds from 2003(R&D on computer) 2007-2009(using the mistmakers),...
http://laserpointerforums.com/f48/some-pictures-my-old-fogdisplay-com-holomodule-project-52760.html
And here is a link to some pictures i took with somebody playing with simple laser pointers using one 9 head mistmaker - fogger.
http://laserpointerforums.com/f48/electric-mist-50034.html
Here is some info :
An instant conversation piece. Transform your water garden into a theatrical outdoor entertaining space with colorful lights and real fog. Floating pond fogger uses ultrasonic technology to produce a perpetual rolling mist while 36 brightly colored LED lights alternate colors for a dynamic lightscape. Requires no additional equipment, plumbing, or chemicals. Easy to set up and fish safe. 11" diameter 31 ft cord, plus an additional 6 ft transformer cord.
Assembly and Operating Instructions
Always be sure to use the original transformer and only connect to the indicated electricity supply.
Place the pond fogger on the water surface and gently press on the pond fogger so it is approximately 1/2" below the water surface. Hold in place for about 30 seconds, release it and it will remain at this optimum water depth.
Connect the pond fogger to the transformer. Tighten the waterproof ring. Plug the transformer into the power source. The pond fogger will start working immediately.
General Instructions for Optimal Usage
Suggested period of use for the Super Power Pond Fogger is no more than 8 hours a day. Connecting a timer to the transformer will ensure your pond fogger is operating within the suggested time period. Placement in clean water is also recommended.
Clean the Super Pond Fogger with a soft cloth, approximately twice per month.
When cleaning the Super Pond Fogger, do not use chemical cleaners.
Maintenance and Service
Mineral deposits and scale buildup will affect the mist volume. Please clean the surface of the mist generating Membrane in the Mist Cavity with a soft cloth or a cotton swab. Do not touch or scratch the Membrane. Do not use any detergents or cleansers.
After about 30,000 hours of operation, the Membrane produces a reduced mist effect due to wear.
The Temperature Sensor Switch will automatically shut of the pond fogger when the unit is exceeds normal operating temperatures. This usually indicates it is time to clean the Copper Unit of the Mist Maker.
Disconnect the transformer from the power supply.
Open the two plastic covers using a screwdriver.
Detach the two plastic covers.
Take out the Float unit.
Clean the scale off of the Copper Unit of the Mist Maker.
Reassemble unit. Place into water and plug the transformer into the power source. The pond fogger will start working immediately.
Caution:
Use only the specified supplied transformer.
Do not put your hand above the fogger while it is operating. The high vibration could cause injury.
Disconnect power supply before removing fogger or during maintenance.
General Information
The UFO Super Power Pond Fogger with LED lights will enhance the beauty and atmosphere of any small pond or large water feature. The Super Power Pond Fogger is fish-safe and will create a mystical pond fog within seconds. Simply place the Super Power Pond Fogger into your pond or water feature and watch in marvel.
Attachments
Last edited: