Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

The sound of laser beams..

tonyt

tonyt

0
Joined
May 2, 2013
Messages
583
Points
0
So,

I was just using one of my 2.5W+ 445's and i was about 3 meters away from the host and i put my ear next to the beam and it has a sound!!! I never knew they made a sound?? It is like the sound you hear when lasing something.. Like a high pitched humm..
Very cool.
 





norbyx

norbyx

0
Joined
Apr 18, 2013
Messages
1,202
Points
48
I don't hear any sound out of my laser. Just one makes a sound but obviously has to be the driver.
 
Cyparagon

Cyparagon

0
Joined
Sep 12, 2007
Messages
9,399
Points
113
You're hearing the switching noise from the driver. It won't be coming from the beam itself.

Another interesting phenomenon happens with high(ish) power flashlights and PWM. You can hear the pwm faintly if you point the beam at your ear, but it is louder if you put a black piece of cloth or paper in front of your ear. The black absorbs the light, heats up slightly on the "on-phase," and cools slightly on the "off-phase." This expansion and contraction of the thermal cycling material produces sound. Try it.
 
Last edited:
tonyt

tonyt

0
Joined
May 2, 2013
Messages
583
Points
0
Even 3 meters from the actual laser?? That is what it sounds like.. But i didn't expect it so far away from the actual unit??
 
Blord

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
Maybe you have sensitive ears and hear the high pitch very good. :)
 
Sigurthr

Sigurthr

0
Joined
Dec 11, 2011
Messages
4,364
Points
83
It is the driver you are hearing. Unless your laser is not CW and operating in a PWM mode you won't get any thermal induced sound (like what Cyparagon was describing) at all. A CW beam's carrier oscillations are a few terahertz too high in frequency for your to hear =P . If your CW driver had enough ripple to AM modulate the beam you could get thermally induced sound, but it would be a pretty piss poor driver then.
 
lasersbee

lasersbee

0
Joined
Sep 20, 2008
Messages
17,622
Points
113
tonyt said:
So,

I was just using one of my 2.5W+ 445's and i was about 3 meters away from the host and i put my ear next to the beam and it has a sound!!! I never knew they made a sound?? It is like the sound you hear when lasing something.. Like a high pitched humm..
Very cool.
Click to expand...

I think what you are hearing is the sizzle of your
ear in the 2.5W Laser's beam.....:crackup::crackup::crackup:


Jerry
 
T

Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
High frequency sound can be weird like that. You could have your ear right next to the source and not hear a thing, yet move around the room a bit and you'll hear it fine.
 
Antharak

Antharak

0
Joined
Apr 24, 2013
Messages
549
Points
43
I've noticed a very high pitch sound when I run the beam from my 2.75W 445nm across a wood box. Like a high speed band saw. Only when moving, wood cells popping?
 
You must log in or register to reply here.





Top