Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Night Vision Laser Question

Fiddy

Fiddy

0
Joined
May 22, 2011
Messages
2,726
Points
63
look up what your unit uses for the onboard illuminator, either 808nm or 940nm i think.
 





J

Jet Black

0
Joined
Jan 24, 2013
Messages
9
Points
0
@ Fiddy The results I saw with you running through all 5 modes with your 1.7W 808nm narrow beam laser & a Gen1+ (?) Night Vision viewer with 1x magnification (?) were very interesting. Thanks.
Can you or anyone else with hands on experience recommend a good set of protective glasses wear with 808nm lasers rated under 350mW ???? Peripheral vision needs to be either filtered of blocked & they need to let as much visible light thru as possible , I really can't work using glasses that block out 50% of visible light.

I am currently at a standstill with my 808nm laser work due to not having any protective eyewear. I have all the hardware I need to start experimenting but I refuse to
power it up until I have a the correct eye protection that will not need an outdoor 1.5KW Quartz Halide Light to light up my work area.



JB
 
Fiddy

Fiddy

0
Joined
May 22, 2011
Messages
2,726
Points
63
Jet Black said:
@ Fiddy The results I saw with you running through all 5 modes with your 1.7W 808nm narrow beam laser & a Gen1+ (?) Night Vision viewer with 1x magnification (?) were very interesting. Thanks.
Can you or anyone else with hands on experience recommend a good set of protective glasses wear with 808nm lasers rated under 350mW ???? Peripheral vision needs to be either filtered of blocked & they need to let as much visible light thru as possible , I really can't work using glasses that block out 50% of visible light.

I am currently at a standstill with my 808nm laser work due to not having any protective eyewear. I have all the hardware I need to start experimenting but I refuse to
power it up until I have a the correct eye protection that will not need an outdoor 1.5KW Quartz Halide Light to light up my work area.



JB
Click to expand...

i have this pair from OEM lasers: https://oemlasersystems.com/product...55-810-980-1064/ml1-808-980-1064nm-yag-detail

they seem to have changed a lil bit as mine where 36% VLT where these are now 45%.

They work great, high quality glasses.
 
You must log in or register to reply here.




Top