BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,685
- Points
- 113
I just got my hands on a 2watt 445nmmodule, with/xdrive,and a g-2 glass lens it also has 510 threaded end could anyone suggest a appropriate host.? thanks
Last edited:
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
need host
- Thread starter BobMc
- Start date
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
Hi,
For a 2 w drop in a Sky Ray S-R5 would be sufficient . Or a 501B with a good heat sink. 2W you can get away easy at low cost . check out survival lasers , Gary sells all the stuff you need for that. he has a nice S4 host with a copper sink and a battery exstention tube to power the build with 2- 18650's . The aluminum host would be better off with sinking compared to the Stainless steel ones.
rich
For a 2 w drop in a Sky Ray S-R5 would be sufficient . Or a 501B with a good heat sink. 2W you can get away easy at low cost . check out survival lasers , Gary sells all the stuff you need for that. he has a nice S4 host with a copper sink and a battery exstention tube to power the build with 2- 18650's . The aluminum host would be better off with sinking compared to the Stainless steel ones.
rich
Dutch67
0
- Joined
- Apr 9, 2016
- Messages
- 1,067
- Points
- 83
Look at survival lasers. They have a nice cheap C6 host that works perfect for these diodes.
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,685
- Points
- 113
Ok, thanks, I forgot to mention it has a 510 threaded end they sell these at dtr. Will check the s4 and the c6 hosts. Thanks again I'm on it
- Joined
- Mar 21, 2016
- Messages
- 966
- Points
- 43
Any vape mod that will hold the proper battery voltage
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,685
- Points
- 113
I know, I tried one,used a sleeve and two 123a batteries,worked great, only thing is all I could find were the units with a momentary switch. Need something with an on and off.But it worked great!
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,685
- Points
- 113
Sounds great, I'll give it a try! thanks, Bobmc
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
Hi Bob,
See in the first the 510 copper piece was from a mech mod copper penny . i took that and fit it by sanding the copper down to fit the 501B host. It's a little work but thats what this hobby is all about.
Rich
See in the first the 510 copper piece was from a mech mod copper penny . i took that and fit it by sanding the copper down to fit the 501B host. It's a little work but thats what this hobby is all about.
Rich
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,685
- Points
- 113
Thanks for the heads up,ordered one.!
