Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Lubricating laser focus mechanism

Joined
Nov 1, 2010
Messages
479
Points
18
Hi,

Just received this laser from O-like today.

The laser has a focusing mechanism.

The problem is, that the mechanism isn't smooth, it's rather harsh, and requires applying massive force to move it.

My question is, can I lubricate it with oil? Won't it damage the mechanism or the laser's lens or something else?

And if so, which oil will be suitable for the job? Will engine oil be good enough?

TIA
 





Joined
Feb 9, 2011
Messages
578
Points
0
Hmm, you could try some silicone lubricant, the grease not the spray, but there could be other lubes you can use.

Or you can use some teflon tape. Found at most hardware stores.

Loctite silicone lubricant - 51360
 
Last edited:
Joined
Feb 5, 2008
Messages
6,252
Points
83
We're skipping over one important thing here - It's not how to make it smooth to move.
It is not supposed to require massive force to move, in the start.

If it barely moves to focus, perhaps the laser is defective in some way, machined with some weird tolerances or possibly out-of-place watertight O-rings in the focusing threads.

First, unscrew the entire focusing mechanism and see if there's anything on the threads. If there's a silicone O-ring, remove it freely, laser is not supposed to be waterproof anyway. I always remove O-rings where they are not needed.

Second, about the lubricant itself - Personally I never tried it but I think it's a bad idea. It will eventually, no matter how or where you apply it, get on the critical parts (lens and diode) and you don't want that.
 
Joined
Nov 1, 2010
Messages
479
Points
18
:thanks:

In the meantime I'm going to leave it as it is.

Didn't have much time to examine it in detail, so maybe the problem is not so bad.
 
Joined
Feb 5, 2008
Messages
6,252
Points
83
Okay then. Let us know how it goes. Hopefully it's just an O-ring.

Nice avatar BTW.
 

viking

0
Joined
Jul 2, 2012
Messages
90
Points
0
If anyone is interested in making their focus ring action smooth like butter... I just put some thermal paste on my 405-G-2 Glass Lens Focus ring and now it has just enough "ease" and resistance...
before, it had a lot of play... rattle... bump it by accident and it turns wildly... anyway, I guess anything would work... vaseline even...
 
Joined
Jan 14, 2011
Messages
3,816
Points
63
Not necessarily the brightest idea. If any of that paste (even a speck) gets in between your diode and your lens, it's toast.
 

DrSid

0
Joined
Jul 17, 2010
Messages
1,506
Points
48
Usually the lens are too loose. That is best fixed by silicone tape wound once or twice around the screws.
 

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
You mean Teflon tape. Silicone tape is too weak to hold anything.
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
I guess ..

Blord is correct... It is TEFLON tape or PTFE tape that is
commonly used to snug up the Threads on a Lens Module
for an Aixiz type LD Module because it is very thin and
designed for use on threads...

How To Use Teflon Tape - Plumbing Repair Guide - ACME HOW TO.com

This is Silicone tape and seems to be too thick to get
into the fine threads of a Lens Module...

X-Treme Tape - Self-Fusing Silicone Rubber Tape

If anyone is interested in making their focus ring action smooth like butter... I just put some thermal paste on my 405-G-2 Glass Lens Focus ring and now it has just enough "ease" and resistance...
before, it had a lot of play... rattle... bump it by accident and it turns wildly... anyway, I guess anything would work... vaseline even...

That is one bad idea....:eek: unless you plan on buying a new
lens once it becomes contaminated with the Silicone Thermal
Grease....

Jerry

You can contact us at any time on our Website: J.BAUER Electronics
 
Last edited:

DrSid

0
Joined
Jul 17, 2010
Messages
1,506
Points
48
Pictures ! I can understand that ! So yeah, I totally meant Teflon tape.
 




Top