Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Lasers on my Quadcopter

Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
So I put lasers on my quadcopter pretty cool buy does not make it any easier to fly at night. These are cheep 5mW lasers that you can buy 50 of them 10.00 on eBay.
25D7346A-4B3F-480F-9BBC-D74D0FC6C9D5_zpsvyrh1etc.jpg

04517D31-B81A-4BA6-9529-38C636080B06_zpsstixxoyw.jpg

C650695E-C4BB-4082-B924-11A09E4A171D_zpskhs4epkv.jpg
 





Looks pretty sweet!!! Is that part they are in the quadcore or something you made? I cannot see where the modules are affixed.
 
Are you just connecting them to the original LED headers on the PCB?

These little quadcopters have a button on the back left of the transmitter that can trigger extra addon modules, if you look at the PCB it has headers for sprayers/winches etc. You could use one of these to switch a laser on and off, say a higher powered one. Alternatively the 2nd button on the right of the LCD screen turns the LED's on and off if you have the lasers connected to the LED plugs.
 
Things said:
Are you just connecting them to the original LED headers on the PCB?

These little quadcopters have a button on the back left of the transmitter that can trigger extra addon modules, if you look at the PCB it has headers for sprayers/winches etc. You could use one of these to switch a laser on and off, say a higher powered one. Alternatively the 2nd button on the right of the LCD screen turns the LED's on and off if you have the lasers connected to the LED plugs.
Click to expand...


No they are just wired into the battery plug harness so when you plug the battery in they come on.
That would be great if I could figure out how to do what you're talking about.
F71ADA59-E44E-4CD4-80A6-6BC93011903B_zpseu2yiscx.jpg
 
That's a different FC board than Things was talking about I think. If it did have switchable outputs it would be one of the two pin headers unpopulated on the board.


Sent from my iPhone using Tapatalk
 
Yeah my controller don't have any extra buttons on it either.:cryyy:
 
Hmm yeah, seems to be quite different, even though everything else is identical.

IMG_0036.jpg
 
It's a p799 buy not sure who it's made by. Im thinking wltoys
 
Last edited:
Nice job!

Funny, I have a quad with the same exact "cockpit" labelled as v959. It has a small camera (not FPV, but still cool). Might be the same one Things posted, but it's been a while since I looked at the PCB. I could probably use the camera connector to switch a laser on and off.
 
Yeah this is not the stock body. I bought 2 of these body's on eBay, they were like $1.60 each.
I love these little quads because they are so cheap and fun.
 
Yeah, they're the best toys around for < $50. I want to buy/build a "real" quad eventually for FPV.
 
You must log in or register to reply here.


Back
Top