Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Laser Module Taking out button?






If you can solder then just desolder it and connect the two contacts with a small piece of wire.
If you can't solder use tape to hold it down
 
simply solder a wire across the switch so it bypasses the switch.

LaserTin2.png
 
What do you mean by solder across the switch, where abouts the switch like where i press it? i'm confused lol
 
look at the diagram, there's 2 contacts on the switch, join them together, it is very simple.

same thing here bro:

GuidesmanHost.png
 
Last edited:
if the switch has 4 contacts, you could put a ohm meter across a pair of contacts and if you see it change on the ohm meter when you press the switch, use those 2 contacts.

or you could just hook the laser up to a battery and bridge out a pair of contacts, when the laser starts lasing, that will be the pair of contacts to join.
 
Thank you so much it now works, sorry if it was annoying that i didn't understand, i am still new and learning but thanks so much guys! :)
 
You must log in or register to reply here.


Back
Top