Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

How to clean laser lenses?

9

919jack

0
Joined
Dec 24, 2008
Messages
74
Points
0
New to LPF and lasers (or at least nice ones :) ). I did search the forum and found some info about cleaning, but there were some differing opinions and I didn't find any info about different types of lenses. I will try to summarize what I found.

To clean dust: use compressed air and a brush (natural brush?).

To clean smudges: use Q-tip and purest alcohol.

An ounce of prevention: keep that dustcap on.


Does this sound right? Would cleaning methods change based on lens type (e.g. glass vs. acrylic)?
Thanks!
 





E

ElektroFreak

0
Joined
Nov 7, 2008
Messages
5,725
Points
0
^Yup.. That's exactly right. The methods are the same no matter what mterial the lens is made of, except I'd watch how much pressure you put on the acrylic lenses. Enough pressure can make cotton act like steel wool on plastic.
 
9

919jack

0
Joined
Dec 24, 2008
Messages
74
Points
0
ElektroFreak said:
^Yup.. That's exactly right. The methods are the same no matter what mterial the lens is made of, except I'd watch how much pressure you put on the acrylic lenses. Enough pressure can make cotton act like steel wool on plastic.
Click to expand...


Thanks for the reply and the warning.
 
M

MrViper82

0
Joined
Nov 26, 2008
Messages
18
Points
0
to rid of dust and such you generally don't need more than compressed air. For very dirty lens, like smudges, I'd use a professional lens cleaning brush used to clean camera lenses. They can be picked up at almost any camera shop for just a few bucks. In my opinion, this is the only sure way to avoid accidentally scratching the lens.
 
S

SuicideKing

0
Joined
Nov 22, 2008
Messages
179
Points
0
My tip isn't about cleaning the lens, but about how not to totally ruin one.

Do NOT use any type of "super glue" or cyanoacrylate based aheasives, like superglue or Loktite in your project or anywhere near the lens.

These glues "fume" as they cure and if an acrylic lens is anywhere near them, the outgassing ethyl chemicales will attack the lens plastic, permanently fogging them.

The residue or etch or whatever it is, makes the lens look like it's fogged up, but no amount of cleaning the lens will get rid of it. -Yes, I learned this the hard way.
 
D

DIE4DIODE

0
Joined
Dec 17, 2008
Messages
10
Points
0
Hi guys, i have a hallo around my laser dot at about 1meter.do you think this is due to dirt or something else? hope i didnt high jack the thread Thanks
 
E

ElektroFreak

0
Joined
Nov 7, 2008
Messages
5,725
Points
0
^Depends on the type of laser. Give a complete description or photo of the laser and I'll attempt to help you make a determination..
 
X

xJumper

0
Joined
Apr 5, 2008
Messages
161
Points
16
SuicideKing said:
My tip isn't about cleaning the lens, but about how not to totally ruin one.

Do NOT use any type of "super glue" or cyanoacrylate based aheasives, like superglue or Loktite in your project or anywhere near the lens.

These glues "fume" as they cure and if an acrylic lens is anywhere near them, the outgassing ethyl chemicales will attack the lens plastic, permanently fogging them.

The residue or etch or whatever it is, makes the lens look like it's fogged up, but no amount of cleaning the lens will get rid of it.  -Yes, I learned this the hard way.
Click to expand...

I can back this up! Used Locktite medium strength on a threads of a projector lens once... Bad idea.
 
M

mariner7

0
Joined
Dec 13, 2008
Messages
7
Points
0
I can tell you I would avoid using alcohol unless it's a glass lens. Alcohol tends to make plastic lenses foggy.
 
9

919jack

0
Joined
Dec 24, 2008
Messages
74
Points
0
So, no alcohol with (or "super" glues on or near) plastic lenses.

How would you clean a smudged plastic lens? I don't have a smudge yet, and I am careful, but I'd like some opinions on what to do in case...

thanks all
 
Kenom

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
There is a great review in the review section on a great product called a lenspen. Check it out.
 
S

SuicideKing

0
Joined
Nov 22, 2008
Messages
179
Points
0
919jack said:
So, no alcohol with (or "super" glues on or near) plastic lenses.  

How would you clean a smudged plastic lens?  I don't have a smudge yet, and I am careful, but I'd like some opinions on what to do in case...

thanks all
Click to expand...

Well, I assume an acrylic lens is an acrylic lens regardless of it's size.
I'd look up what they use to clean eyeglasses with plastic/acrylic lenses...
 
You must log in or register to reply here.




Top