Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Host battery compartment help

TTerbo

0
Joined
May 20, 2010
Messages
1,361
Points
0
hey guys, i dont make threads very often anymore,
BUT i am in the process of making a phr bluray, i have all the parts comming this week, my host has a compartment for 2xD battery cells, i am wondering how i should concert it to run on 2x C123 batteries.
Do i make some sort of tube and place the batteries in the tube??
i will post pics if you need them,
cheers
 





Joined
May 31, 2009
Messages
3,239
Points
63
Yes you can do many modifications... The best advice I can give, without seeing it, is make an insert tubing that has the correct width to hold its self in the host and correct inner diameter for the batteries to slip in. If needed a dummy battery can be made so connection from the positive and negative contact points can be made.

You could make it out of PVC and drill out the inner bit, to the right dia. if you can not fine one.

Hope that helped -Adrian
 

TTerbo

0
Joined
May 20, 2010
Messages
1,361
Points
0
yes i will try it, is this the easiest?
i will post some pics,or go on skypeand il show u
 

TTerbo

0
Joined
May 20, 2010
Messages
1,361
Points
0
hey thanks bobhaha it worked my host that used to use 2xD cells it now uses 3x c123 batteries outputting 9volts. thanks man this will be a one off thing now when i open a help threAD, THANKS
cheers
 




Top