- Joined
- Sep 5, 2013
- Messages
- 8,549
- Points
- 113
I hope so too :bowdown:
I see you're already quickly rebuilding your collection Alex.
I am, yes! :drool:
-Alex
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
HELP ME! 505nm Build request!
- Thread starter NightExplorer96
- Start date
I hope so too :bowdown:
I am, yes! :drool:
-Alex
Eracoy
0
- Joined
- Jul 21, 2014
- Messages
- 173
- Points
- 43
I see that DTR has his 505nm diode-driver module using a boost driver. I wonder if those are available yet. If so, it would be a good choice to get all the hardware other than a host you like the shape of. And because it's a low power diode on a boost driver, a single cell will be enough and thus a small build. I look forward to what you find, as I too want a small 505nm in my future.
- Joined
- Mar 5, 2015
- Messages
- 1,336
- Points
- 113
Yes these 473 diodes should be awesome, I've purchased 2 already on there way
And hopefully a 3rd high binned also,
Drivers on the other hand, best would be Jordan's Nano boosts at 275ma but he only has a hand full!
- Joined
- Sep 20, 2013
- Messages
- 17,445
- Points
- 113
Are those drivers adjustable, or do I have to take 275 mA? I'd prefer to adjust mine as I want to push it to 350 mA. I think it will have a nice long life at that current.
- Joined
- Mar 5, 2015
- Messages
- 1,336
- Points
- 113
No not adjustable either that or 520ma unless you can remove and solder on the wright resistor and swap it with another for your 350ma!
Last edited:
- Joined
- Sep 20, 2013
- Messages
- 17,445
- Points
- 113
Damn! I'll have to come up with something else. I think the Vf is too high for a buck, so maybe a buck/boost.
- Joined
- Mar 5, 2015
- Messages
- 1,336
- Points
- 113
I just found this cheap boost driver that should be ok with this diode Specs say 3v in. 7.5v out ok it isn't as good as what we have been using but it's a cheap option if we get stuck with no quality drivers!
https://www.ebay.com.au/itm/112319451578
https://www.ebay.com.au/itm/112319451578
10fenny
0
- Joined
- Sep 10, 2014
- Messages
- 1,054
- Points
- 83
Just ordered one!!! Got look through my build box to see if I even have a driver for it!!!
- Joined
- Sep 20, 2013
- Messages
- 17,445
- Points
- 113
I ordered the buck/boost nano driver from DTR. It is supposed to have only three ranges, but after reading over its ranges of 275 mA, 500 mA and 1.1 amps, I believe I can get 350 mA out of it. That is what I intend to run my 473nm diode at. The one from eBay only goes up to 125 mA and I didn't like the way they described it. Not sure if it is current adjustable or voltage adjustable.
Hope you share your mod. I couldn't hold back and ordered the new diode/driver modules. Going to be a bunch of new build threads coming up. Looking forward to it. :wave:
- Joined
- Mar 5, 2015
- Messages
- 1,336
- Points
- 113
Like I said it's there if we get stuck with no drivers, I'm not sure we're you saw 125ma it should go as high as 500ma!
I already have a few nanos so I won't be using it, It's just a backup!
I already have a few nanos so I won't be using it, It's just a backup!
- Joined
- Sep 20, 2013
- Messages
- 17,445
- Points
- 113
I saw the 125 mA limitation on that driver. Too low for my purposes.
Dan, I'll be happy to share what I learn about changing the set values on the nano buck/boost driver. My aim is for 350 mA and I believe after I measure the three resistors used to set the current, I'll be able to get it to regulate at that current.
Dan, I'll be happy to share what I learn about changing the set values on the nano buck/boost driver. My aim is for 350 mA and I believe after I measure the three resistors used to set the current, I'll be able to get it to regulate at that current.
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
Eracoy
0
- Joined
- Jul 21, 2014
- Messages
- 173
- Points
- 43
Hi ,
I should be done with my 505 build tonight , Setting the nano to 275ma .. Got up early to machine a sink and knob half asleep.
Rich
That's going to be a pretty host with that copper and such a unique diode. Looking forward to some more pictures!
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
- Joined
- Mar 5, 2015
- Messages
- 1,336
- Points
- 113
Well that colour looks sic! But yours was a 503 yeah!
