Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

An 08 and two 05 builds, (picture heavy)

BobMc

BobMc

0
Joined
Apr 23, 2016
Messages
3,683
Points
113
Well I lived on Mac&Cheese for awhile and purchased three Lux-Pro Lp600 flashlights to use as hosts. Like the rubber they have around the handle seem to real comfortable in the hand. Also purchased an 08 and two 05's. One with the G-ball intact and the other with a G2 lens, ( wanted to compare them ) Got the drivers pre-set. The 08 at 5.0amps, the 05 with the g2 at 4.5 amps and the g-ball at 4.0 amps. Got some solid copper heat sinks from Lifetime, got all the parts so it's picture time :)
IMG_1252_zpsq2sjvcju.jpg
IMG_1256_zps6erdekav.jpg
IMG_1254_zpsijbnmt7f.jpg
IMG_1260_zpsr548u3ci.jpg
IMG_1259_zpszvcv9i2b.jpg
IMG_1259_zpsnrhtps4l.jpg
IMG_1258_zpsbvjewvpv.jpg
IMG_1262_zps0qveiiia.jpg
IMG_1261_zpsfcfovarn.jpg
IMG_1263_zps9nchfski.jpg
IMG_1264_zpsrwttqrxu.jpg
IMG_1267_zps2k2ivwoa.jpg
IMG_1273_zpsytou9bzp.jpg
IMG_1283_zpsxsz11mmq.jpg
IMG_1293_zps5qahpj1x.jpg
IMG_1291_zpsftdzcaku.jpg
IMG_1290_zp***kkkydf.jpg
hope you enjoy the pics. :)
 





Nice builds, very good work.
How is the divergence on the one with the G-ball?
+ rep
Ed :beer:
 
Great job! How does the 08 compare to the 05s in terms of power, visibility and beam specs and what's the beam on the 05 like (with Gball) compared to G2?:beer:
Edit: Rep in coming, must spread some first...
 
Last edited:
  • Like
Reactions: GSS
@ Antharak and Grainde; Give me a bit and I will try to do some measurements on the beam difference between the two 05's. Was so tried after finishing the builds and posting last night I needed a break. Will try to update either today or tomorrow. Thanks for the koodo's and rep's :)
 
Lifetime17 said:
Hi BM
I knew you would get around using those sinks buddy. Great job and nice diode choice to .

Rich:)
Click to expand...

Thanks Rich! You did a great job on the heat sinks at a real good price also, they fit just prefect, besides their pretty all polished up.:). Still having a hard time trying to solder to the aluminum pill. Had to solder to the edges of the contact board than press fit the contact board in the pill. It's pretty tight/snug. Seems to be a good connection? Going to post some beam comparisons of a 05,06,07,08 and a 44 , when I get some time. Thanks again ! :)
 
Last edited:
Hi BM,
here is what you do for a connection with a board and an AL pill.get a piece of CU wire solder it to the ground on the board and bend it over the edge the thickness of the wire will dictate the snugness when you press it in. Now the board wont move or come out ,besides the batteries will keep additional pressure on the board.
Oh about all that Mac & Cheese you better get your cholesterol checked buddy. All that Cheese and Carbs get the dietetic brand , either that or start lifting to use the carbs :)

Rich:)

Rich:)
 
Last edited:
Lifetime17 said:
Hi BM,
here is what you do for a connection with a board and an AL pill.get a piece of CU wire solder it to the ground on the board and bend it over the edge the thickness of the wire will dictate the snugness when you press it in. Now the board wont move or come out ,besides the batteries will keep additional pressure on the board.
Oh about all that Mac & Cheese you better get your cholesterol checked buddy. All that Cheese and Carbs get the dietetic brand , either that or start lifting to use the carbs :)

Rich:)

Rich:)
Click to expand...

That's pretty much what I did with the ground wire but it's sure is nice to know I was on the right track.


As far as the m&c goes, if I build/lift larger lasers does that count? :)
 
Nice hosts guys. When you can get around to it could you add some close up pics of the host?
 
Nice convenient build(s), triplets to add to your collection! Good work from LT too, nicely done. :D
 
dden4012 said:
Nice hosts guys. When you can get around to it could you add some close up pics of the host?
Click to expand...

Hope this is what your looking for. You can find the hosts at Lowes, aprox. 25.00 each.
IMG_1319_zpsp3did6ph.jpg
IMG_1320_zpsctzogk5v.jpg
IMG_1321_zpsg4sqxtn8.jpg
IMG_1322_zpsn6upwimx.jpg
IMG_1323_zpss2kpiufl.jpg
:yh:
 
ElectricPlasma said:
Nice convenient build(s), triplets to add to your collection! Good work from LT too, nicely done. :D
Click to expand...

Thanks a bunch, EP. Always nice to hear that. Yes, they are rather convenient host, the heat sink has got close to three times the mass as a c6, so run time soooo much better. About the same length just 1/2 times larger in diameter. Got the rubber around the handle which makes it real comfortable in the hand. Real easy to build also. Just got the enlarge the corners of the pill so the driver fits a tad bit better and the rest is basic.
 
You must log in or register to reply here.


Back
Top