bobhaha
0
- Joined
- May 31, 2009
- Messages
- 3,239
- Points
- 63
G'day guys,
So I acquired an Argon laser.... yes another.
The laser head is a GLG3078 running on a 2111-65MLQYV PSU.
I have been looking for the pinout for the PSU DB25 interlock, with mixed results. Some sources say one thing, then another source contradicts the other.
I have found Pin 1 and 3 disables the interlock... from here on, I'm in the dark.
I have read that pin 13 and 2 needs to be shorted together, to put the laser in RUN mode... but other sources say 13, 2 and 4 needs to be shorted... again other sources say 13, 2, 4 and 7 need to be shorted. Which one is it!??! Uurgh!
Another question I have is, do I need a Pot input to get the laser to idle?
Lastly does anyone know the exact pinout and/or have a remote that will suit this PSU?
Thanks in advance!
-Adrian
So I acquired an Argon laser.... yes another.
The laser head is a GLG3078 running on a 2111-65MLQYV PSU.
I have been looking for the pinout for the PSU DB25 interlock, with mixed results. Some sources say one thing, then another source contradicts the other.
I have found Pin 1 and 3 disables the interlock... from here on, I'm in the dark.
I have read that pin 13 and 2 needs to be shorted together, to put the laser in RUN mode... but other sources say 13, 2 and 4 needs to be shorted... again other sources say 13, 2, 4 and 7 need to be shorted. Which one is it!??! Uurgh!
Another question I have is, do I need a Pot input to get the laser to idle?
Lastly does anyone know the exact pinout and/or have a remote that will suit this PSU?
Thanks in advance!
-Adrian
Last edited: