Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Soldering gun

Joined
Dec 25, 2009
Messages
1,251
Points
48
I kind of want to try a DIY, and need a soldering gun. Is there a specific brand or type you all recommend?
 





What do you want to solder....

It's like asking "I need something to carry water"...
(1 spoon full or 1 swimming pool full...:thinking:)


Jerry
 
WELLER makes a pretty good soldering GUN. I have one in addition to my soldering IRON.
rob
 
Go for an iron, not a gun for electronics projects. Most soldering guns run way to hot for electronics - they are more suitable for have wiring, tubing and such.
 
^^^^^ Exactly^^^^.... and an Iron will have a smaller tip for fine
soldering to a Driver.... Definitely don't get a Gun for Laser
builds...

[EDIT]... fixed:yabbem:


Jerry
 
Last edited:
Yes go for a iron not a gun. For diodes and small projects a 25 to 30 watt iron is ideal.
The most important thing to look for is if finding replacement tips will be easy.
I know everybody hates on radioshack, but they do always carry replacement tips for their low cost irons.
 
Invest in a good Weller Iron.... It will last you a long time and
the Tips are easy to find..
You will also need .020" to .031" diameter Flux Core Solder..

Jerry
 
Invest in a good Weller Iron.... It will last you a long time and
the Tips are easy to find..
You will also need .020" to .031" diameter Flux Core Solder..

Jerry

Jerry, Any recommendations on a good (but cheap) soldering station?
My POS $5 ones keep breaking :(
 
If you're on a budget, consider Aoyue soldering stations, like the 936 (analog) or 937 (digital) models. They are priced at $50 or so, and very good quality for their price.
 
Jerry, Any recommendations on a good (but cheap) soldering station?
My POS $5 ones keep breaking :(

Over the years working in the Shop... we found that Cheap and Good
are nit really synonymous...
There are fair soldering stations like Benm suggested and some others.
We tried the <$40.0 cheapies and scrapped them.. not worth the
money IMO... like these...

SOLDERING STATION, solder iron, 50W, WHOLESALE, NEW on eBay.ca (item 290425192942 end time 21-Apr-10 17:20:05 EDT)

We use Weller Soldering stations exclusively... been using them for
over 25 years... so I guess I'm a bit biased towards the Weller Stations...
We solder every day and a tip last us a year or more.

Weller WES51 Analog Soldering Station w Accessories NEW on eBay.ca (item 370360974530 end time 05-May-10 20:42:41 EDT)

or even one of these...

WELLER 40-WATT SOLDERING STATION, # WLC100 on eBay.ca (item 370344179013 end time 02-May-10 19:10:23 EDT)


Jerry
 
I have an old Unger soldering station (about 15 yrs old) a UTC-300. It's been discontinued, but that isn't so much my point. If you solder things somewhat regularly, you should probably invest in a station that offers adjustable temperature and tips that can be exchanged. Mine can run anywhere from about 350-800 degrees plus, and offers tip sizes from precision to fat / high capacity. It is simply a better way to solder, compared to any gun or iron that I've seen. I like having the "right tool for the job" and a soldering station with adjustable temp and swappable tips covers it all.

Mine was about $100 15 years ago. Additional tips extra. Still working today, and WELL worth the investment.
 
Weller makes quality products alright, its the brand to buy if you want stuff to last a long time.

But you do pay a sort of brand premium price for their gear as well. There are some solutions on the market that cost less and still work well, like aoyue, but there also is a lot of crap sold at lower or even similar prices.

The biggest practical difference is in the soldering tips: the cheapest ones are just made of copper, and those slowly dissolve in solder and wear out under the slightest mechanical pressure in no time. Anything like that is a complete waste of money.

Personally i somewhat dislike the cheaper weller sets because of the relatively long hot part of the iron - i prefer to have a gripping point closer to the soldering tip.
 
Forgot the brand I have (nit at home) I got mine for $40 and it's a knob temp adjuster. Ranges from 250 to 700F. I use the. 250F for fragile super heat sensitive items. I had no problems soldering a laser diode (direct on it's pins ). I also use it all the time for SMD parts. So I'd recommend a temp adjusting one. Doesn't need to be digital, but it helps for a range of usage. Mine was for electronics.
 
I use a hakko 936. Benm mentioned it, it seems to be the same as a Aoyue 936.

I use the. 250F for fragile super heat sensitive items.
Well, Pb/Sn eutectic solder doesn't melt until around 360F, what are you using?
 
Last edited:
^^^^^ Exactly^^^^.... and an Iron will have a smaller tip for fine
soldering to a Driver.... Definitely don't get an Iron for Laser
builds...

Jerry


Hey Jerry,

Do you mean definitely don't get a GUN?

I'm sure we all know what you mean but some might get confused.

M
:)
 
Last edited:


Back
Top