Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Pen laser IDEA

M

milantheone

0
Joined
Dec 2, 2008
Messages
339
Points
18
hello guys i hope that my following idea has not been discovered by someone else yet...  :D

i have always seen like everybody use only upper part of aixiz module for PEN STYLE build..  :-/

the most common driver for this build is Flexdrive and there is no space for bottom part of AIXIZ..

in my opinion every ittle piece of metal could help SINK some HEAT and also bigger module body can pass to more heat to leadlight body better than small...

i was thinking how to use entire body of aixiz and then i have got ideda which i would like to share with you..

i have used it also for my project..

there is not much to say - picture disclose everything

i just hope that it has not been covered  :-/
 

Attachments

  • pen_aixiz.JPG
    pen_aixiz.JPG
    157.7 KB · Views: 200





rog8811

rog8811

0
Joined
Jul 24, 2007
Messages
2,749
Points
0
I have to ask....How do you screw the back on without twisting the pins off the LD? :-/

Regards rog8811
 
L

L@z3r

0
Joined
Dec 24, 2008
Messages
217
Points
0
rog8811 said:
[highlight]How do you screw the back on without twisting the pins off the LD?[/highlight] :-/

Regards rog8811
Click to expand...
epic_fail2.jpg
 
M

milantheone

0
Joined
Dec 2, 2008
Messages
339
Points
18
rog8811 said:
I have to ask....How do you screw the back on without twisting the pins off the LD? :-/

Regards rog8811
Click to expand...

good question, but i was hoping that it is apparent..

well you need to solder wires on the diode, then screw back of the module and then wires to the driver...  after that put a tiny layer of insulating tape around the driver of course..

so there is a wired connection between the driver and LD...  ;)  rest of wires you easy hide in a module there is enough space.. just one remark use a SOFT WIRES...
 
M

milantheone

0
Joined
Dec 2, 2008
Messages
339
Points
18
L@z3r said:
[quote author=rog8811 link=1233496288/0#1 date=1233505449][highlight]How do you screw the back on without twisting the pins off the LD?[/highlight] :-/

Regards rog8811
Click to expand...
epic_fail2.jpg
[/quote]

you should know a fact at first mate then post stupid pictures  ;)

you FAIL buddy  ;D

you FAIL even worst if you were thinking that DRIVER IS directly connected to the LD pins...  ;D ;D ;D
you FAIL with your unability to figure out how my idea is working..  :'( :'( :'(

back of your jibe   ;)
 
potatorage

potatorage

0
Joined
Mar 20, 2008
Messages
1,341
Points
0
It's more trouble than it's worth. That's why I never use the other half of the aixiz
 
M

milantheone

0
Joined
Dec 2, 2008
Messages
339
Points
18
[ch12290 said:
]It's more trouble than it's worth. That's why I never use the other half of the aixiz
Click to expand...

could you explain why???? :eek:

if you are using a flexdrive in leadlight you always need to make a wired connection between driver and LD..
this is only way how to use a little bit more METAL to sink some heat...
i am not going to convice anyone to do it like this... i just want to post my idea and if someone else have own solution i am not telling to you use my ideas..


peace guys..  ;)
 
phoenix77

phoenix77

0
Joined
Apr 1, 2008
Messages
3,924
Points
0
HI Milan, Although your idea is a good one for additional heat transference, (IMO), I know of at LEAST one person that has already had that idea. About a month ago, someone, & I can't for the life of me remember who, was selling off some spare parts on the forum. Some of the parts included some AIXIZ modules, & one of them was cut in almost the same way as yours is. GREAT minds think alike I guess ;) But SOMEBODY beat you to the punch on this one :( But keep on posting ideas you come up with, if you would. You'll never know when you'll come up with something nobody has thought of before :eek: ;) Way to go MILAN, +1 REP for trying to help the FORUM ;)
 
M

milantheone

0
Joined
Dec 2, 2008
Messages
339
Points
18
phoenix77 said:
HI Milan, Although your idea is a good one for additional heat transference, (IMO), I know of at LEAST one person that has already had that idea. About a month ago, someone, & I can't for the life of me remember who, was selling off some spare parts on the forum. Some of the parts included some AIXIZ modules, & one of them was cut in almost the same way as yours is. GREAT minds think alike I guess ;) But SOMEBODY beat you to the punch on this one :( But keep on posting ideas you come up with, if you would. You'll never know when you'll come up with something nobody has thought of before :eek: ;) Way to go MILAN, +1 REP for trying to help the FORUM ;)
Click to expand...


well i havent seen it, so sorry for double post in this case..  :'(

it seems for me that each question and ideas has been covered already on this forum..   :D :D

but it is good.. it makes this place PERFECT
 
rog8811

rog8811

0
Joined
Jul 24, 2007
Messages
2,749
Points
0
well you need to solder wires on the diode, then screw back of the module and then wires to the driver
Click to expand...
That would do it :)
I have made posts myself in the past that I thought made the idea perfectly clear only to have lots of questions on the "how and why".

I still sometimes assume others are on my wavelength (405nm) and find they are somewhere in the infrared ::)

Regards rog8811
 
You must log in or register to reply here.




Top