Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

My first 2 MXDL Aiaxiz Module Cooling

Joined
Feb 24, 2009
Messages
29
Points
0
Hi

want to show my first Aluminium Cooling head for the MXDL with fitting for Aiaxiz Module ( photo is in Bad quality because i made it with my webcam ;)
 

Attachments

  • pic1_001.jpg
    pic1_001.jpg
    19 KB · Views: 93





Joined
Feb 24, 2009
Messages
29
Points
0
this is my second one Aluminium Cooling head for the MXDL with fitting for Aiaxiz Module ( photo is in Bad quality because i made it with my webcam ;)
 

Attachments

  • pic2_001.jpg
    pic2_001.jpg
    17 KB · Views: 91
Joined
Feb 24, 2009
Messages
29
Points
0
I must just polish the back of the MXDL that it gets silver too or perhabs i will make a other battery housing ....but like i said it is my first project...for my 2 PHR. I will make one for the LPC too...i Think it has enough cooling to put a little bit more power inside the diodes ;D

Will make some tests with the PHR ( ma ) and temp.
 
Joined
Dec 24, 2008
Messages
409
Points
0
That would make it look even better! I think you'll find that, that has way more then enough cooling for the diode :-X... ;)
Again great job :D
 

Benm

0
Joined
Aug 16, 2007
Messages
7,896
Points
113
That looks like a decent heatsink!

I suppose you might as well machine the back end too, doing away with the flashlight completely.
 
Joined
Feb 24, 2009
Messages
29
Points
0
Benm said:
I suppose you might as well machine the back end too, doing away with the flashlight completely.

yes, but first i must play a little bit and make some tests. It was my first idea. I am thinking about a small one too with the lava microflex driver. In this one there is there is a rkcstr micro driver inside.
The next thing what i want to do is to make a pulsed driver, but this can make only a friend of me ( for me ). He is developer in the car industry ( he developes the Motor electronic ).
 
Joined
Feb 24, 2009
Messages
29
Points
0
because the lm on the rkcstr gets very hot, the microflex driver can only handle to 5,5 V. and you can drive the diodes a little bit higher and the diodes will live longer ...i read it so in the internet...my friend have some other features he want to implement :) When it is finished...it would be a great driver.... i will post it here...when it is finished...
 




Top