Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

My DIY Blu-Ray

T

thejunkmonger

0
Joined
Feb 4, 2008
Messages
510
Points
0
I started building my barrel out of copper today didn't get much done but it's a start. Still need to wait for parts to get here so I can figure out the measurements.
I figured I would post pics of my progress in this thread. Here is the first installment.

1. started to drill out the Copper to fit 1 CR123 rechargeable.
2. started to get a rough cut on the outside diameter. (Copper is a real pain in the A** to work with at least on the lathe they have at work, maybe because it only does 1800 R.P.M. I dunno)
 

Attachments

  • IMG_5231.jpg
    IMG_5231.jpg
    19 KB · Views: 153





T

thejunkmonger

0
Joined
Feb 4, 2008
Messages
510
Points
0
roSSco said:
:cool: Do you plan to coat the outside or just leave it natural?
Click to expand...


Au natural it can do whatever it want's to do, I want it to look old. If I screw this one up (which I probably will) I would probably be better off using bronze because it looks better when it's tarnished. Oh well we will see what comes out of this. I still have no Idea how i'm gonna make the battery cap, well yes I do but have no idea if it can be done or not. My main problem with the cap is I don't have anything to thread the cap and the body with. I'll find a solution i'm sure.
 
T

thejunkmonger

0
Joined
Feb 4, 2008
Messages
510
Points
0
Just finished the lens assembly. It's a dx module with plastic lens. I opened up the back end like was suggested in other posts . The head is Bronze hmm this thing is a mix and match dunno how well it will come out LOL.
 

Attachments

  • IMG_5236.jpg
    IMG_5236.jpg
    15.6 KB · Views: 140
T

thejunkmonger

0
Joined
Feb 4, 2008
Messages
510
Points
0
FireMyLaser said:
[quote author=thejunkmonger link=1211214201/0#6 date=1211218025]
If I screw this one up (which I probably will)
Click to expand...


That's the wrong attitude, your doing great so far, keep it up. :cool:[/quote]

Thanks Fire i'm using all the junk I can find to make it not really buying anything other than diode and electronics, so it will be a Frankenstein no doubt there.
 
john_lawson

john_lawson

0
Joined
Feb 22, 2008
Messages
3,182
Points
48
if you do you can join the(" i hope my wife doesn't find out what i really spent on bluray stuff club")
 
rog8811

rog8811

0
Joined
Jul 24, 2007
Messages
2,749
Points
0
The blueray I posted in the eyeball thread was made before I had a lathe capable of thread cutting, I found that good size threads for a CR123 size barrel can be stripped out of old camera lenses. that is what holds mine together.

I must say that I have broken more drills, over the years, in copper than any other metal. Measuring tight tolerances on a material that gets hot so quickly when machining is a bit of an art as well.... good luck with the build, I await the result with interest.

Regards rog8811
 
Switch

Switch

0
Joined
Dec 9, 2007
Messages
3,327
Points
0
I so rarely get my threads on the lathe right.I had a perfect aperture cap made for my dvd laser that I lost.The new one I made just jiggles a little until I tighten it :-/ But seriously , you're doing a good job, and stick to the copper for ultra heatsinking ;D Btw, I heard that copper oxide is somewhat toxic :p
 
Zom-B

Zom-B

0
Joined
Mar 25, 2008
Messages
895
Points
28
Switch said:
Btw, I heard that copper oxide is somewhat toxic :p
Click to expand...
rog8811 said:
*Mental note* don't lick your laser...... :)
Click to expand...
This implies: "Wash your hands after using this laser" not really user friendly if you ask
 
You must log in or register to reply here.




Top