Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Led Lenser

Lotus_Darkrose

Lotus_Darkrose

0
Joined
Feb 19, 2009
Messages
1,807
Points
48
Has anyone ever used this as a host with an aixiz module? If so what needs to be done? It's a Coast Led Lenser keychain with a tail clicky. 4 Button cells go in it. I like it because you need to press the clicky all the way down in order for it to stay on, but if you just press it in a little it is a very nice momentary switch.

Lenser.jpg
 





Jimmymcjimthejim

Jimmymcjimthejim

0
Joined
Apr 29, 2008
Messages
1,562
Points
48
I'm sure it would be possible, the host looks about the size of some of the other tiny builds on the forum (think: JayRob!).
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
That looks like a nice little host and could surely be modified into a laser build using the tiny new version 4 FlexDrive! The battery is the thing to consider. The button cells will not do for a FlexDrive...

I know that a 10220 will work, but it is only 90mAh's capacity. If there is room for a 10280 (10mm X 28mm), they you can have 200mAh's! :)

The other thing is, I think the 10280's are hard to get a hold of these days...

What is the I.D. of the battery compartment?
Jay
 
Lotus_Darkrose

Lotus_Darkrose

0
Joined
Feb 19, 2009
Messages
1,807
Points
48
rough measurement is 13mm wide, and probably an absolute max of 24mm deep if I were to shorten the spring.
 
Lotus_Darkrose

Lotus_Darkrose

0
Joined
Feb 19, 2009
Messages
1,807
Points
48
It would have to be machined, which I cannot do. But if it were drilled out like only 1mm and the tailcap somehow shortened, then I am almost certain a 14mm x 25mm battery would work.
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
I can see from your pictures that the tail cap could easily be shortened. Because the threads dont start for a couple of mm.

These tiny builds are cool, but the smaller the build, the harder it is!

Does the head unscrew from the body?
Jay
 
Lotus_Darkrose

Lotus_Darkrose

0
Joined
Feb 19, 2009
Messages
1,807
Points
48
Sadly no :'(

But you can take a hammer and something that fits down the hole and knock the LED assembly out! Yay! ;D
 
You must log in or register to reply here.




Top