Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

help again






Joined
Sep 25, 2007
Messages
209
Points
0
It's probably out of spec, but it may be possible with an extreme temperature control solution. The bigger issue is limiting the current to make sure you don't have an instant blowout.
 
Joined
Sep 7, 2007
Messages
634
Points
0
Okay with 4.5 volts and a 5 ohm resistor, I was getting 160 mA. So as long as you dont hook 4.2 volts directly on the LD you will be fine.
 

chimo

0
Joined
Jun 20, 2007
Messages
650
Points
0
You know, you've asked very similar questions here and many people have taken the time to give detailed responses, yet you continue to ask. If you don't want to put the effort into trying to understand the responses and figure out the answer on your own, it is unrealistic to expect people to continue answering them. Other than being annoying, this type of action usually tends to cause people to be ignored.
 
Joined
Sep 7, 2007
Messages
634
Points
0
chimo said:
You know, you've asked very similar questions here and many people have taken the time to give detailed responses, yet you continue to ask. If you don't want to put the effort into trying to understand the responses and figure out the answer on your own, it is unrealistic to expect people to continue answering them. Other than being annoying, this type of action usually tends to cause people to be ignored.

I agree. :cool:. This---> http://www.laserpointerforums.com/forums/YaBB.pl?num=1191628939 is the identical question man. :p
 




Top