- Joined
- Jul 1, 2009
- Messages
- 588
- Points
- 18
Here's the video
Anyone who want to do this mod you will need:
you dilda laser
a USB cable
and 5 mins of your time
First cut the cable and expose the 4 wires,attach it on your PC and with your DMM look for the two wires that put out ~5V.in my case they were the black and red.
Next,take out your swith and remove all the components so you will have the tailcap with the hole in the middle.
Then unscrew the top of your laser and remove the spring of the driver.Pass the USB cable through the hole of the tailcap and the rest of the host. Now solder the wires from the USB cable to the driver like in the picture below,screw them all back together and you're ready to lase!(the USB cable will be coming out from the back of the switch)
Optional:you can use some kind of glue to protect the wires from getting cut because they're really thin(i used hot glue)also,
Anyone who want to do this mod you will need:
you dilda laser
a USB cable
and 5 mins of your time
First cut the cable and expose the 4 wires,attach it on your PC and with your DMM look for the two wires that put out ~5V.in my case they were the black and red.
Next,take out your swith and remove all the components so you will have the tailcap with the hole in the middle.
Then unscrew the top of your laser and remove the spring of the driver.Pass the USB cable through the hole of the tailcap and the rest of the host. Now solder the wires from the USB cable to the driver like in the picture below,screw them all back together and you're ready to lase!(the USB cable will be coming out from the back of the switch)
Optional:you can use some kind of glue to protect the wires from getting cut because they're really thin(i used hot glue)also,
this way you can have a portable (sorta) laser and still be able to use it while you wait on the batteries to charge.
