dilda modification. could be ok?

when i will receive my dilda.(i ordered by olike, a best unit performing >190mq .. susie told me 195mw).. i will try some modifications... i would try to use 2 cr123 battery. these have more MAH....respect of cr2. but at least i could buy 2 cr2 at 3.6 volt( 4.2 charged) at ebay. it is the easyest way to find this kind of special cr2 battery. icr2 is 15270 lion. so. 15mm wide and 27mm lenght. totally 27*2=54mm. an AAA battery is also called 10440. so....(44 lenght) 54-44=10mm. is incredible... but 2 cr2 battery are only a bit longer than one aaa!

te widht of the dilda tube. i thik cannot contain a 3xaaa adaptor... or yes? my 3xaaa is wide 20mm. so...5mm more than a cr2 battery. and i think it is aimpossible to fit in this...in the dilda. the best thing to have more power( 3.6v instead 3) and ALSO an important duration of the laser... is to use 3.6 vv cr123 battery. this battery is 35mm lenght i remember. so....8mm longer than cr2. and 8mm*2=16mm. so.. we shall/must only find a way to have 1.6 centimetres in more i have a little IDEA.

putting a spacer in EVERY dilda thread.(i explain better: when you screw the dilda body. you can strew it a less...and use an o-ring spacer to screw if strong.) excuse me for my bad english..and screw it in this way to recover some mm. and finally.. CUT a bit
the spring of the driver. so.. if we are lucky we should have the 16mm in more!!!