Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Aconsen Modul in MXDL

Danjoo

0
Joined
Sep 18, 2008
Messages
202
Points
0
I have ordered a 300-350mw Module from Susie.  :cool:
I want it in the smallest possible sensfull host.
With the host, after duty cycles of 2 minutes its barely warm.  :)

[media loop autostart width=450]http://de.youtube.com/watch?v=ckAiacXAbB0[/media]


beast.jpg

open1.jpg



Some pictures to show you guys a possible solution for the aconsen modules.
In this case the "power on" led is useless and the main switsh from the module is allways on.

Finally i take the MXDL 5Watt host, normally it runs with 3 aaa.
For my mod i put one 18650 in it to power the module.

First mesurment give me 2100ma bevor the driver.
I pusch it via the pot to 2800ma.
powerin.jpg


Now its never below 450, peaks to 550.
I will se how long this work, on suzies page is written 2w ir diode.
powerout.jpg


The heatsink is diy, i dont have the tools too build the tread for the heatsink to fit with the body.
Thats the reason for taking the originall tread and glue it in the heatsink.
To prevent damage i spend a heatsink to the resistor wich getting quit warm at 2,8amps.
Its bit copperplate.
open2.jpg



The laser is still adjustable, to fix the optik i add a spring.
optik.jpg


And some outdoor beamshoots freehand.
Paint my neighbours house green.  [smiley=thumbsup.gif]
neigbours.jpg



Lase the moon.  ::)
moon.jpg



daniel
 





JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Love the heatsink! nice build ::) How much did the module set you back, if you dont mind me asking?
 

artix

0
Joined
May 24, 2008
Messages
994
Points
0
Awesome! Make a video of this!

What are the beam specs?
 
Joined
Sep 8, 2008
Messages
182
Points
0
+1 for that build! bomb laser for sure. I really like the heatsink!

cheers,
kernelpanic
 

Danjoo

0
Joined
Sep 18, 2008
Messages
202
Points
0
Originall beam specs are:
Beam Diameter:1.0~1.2mm(at aperture)
Beam Divergence:<1.5mRad

But the beam looks bigger for me, more like 3mm at aperture.

@artix
what you want to see in the vid?
A burning video is posted above.
Let me now and i make it.

@kernelpanic
Thanks for the rep. [smiley=dankk2.gif]
 

artix

0
Joined
May 24, 2008
Messages
994
Points
0
Danjoo said:
Originall beam specs are:
Beam Diameter:1.0~1.2mm(at aperture)
Beam Divergence:<1.5mRad

But the beam looks bigger for me, more like 3mm at aperture.

@artix
what you want to see in the vid?
A burning video is posted above.
Let me now and i make it.
 [smiley=dankk2.gif]

:-[ I must be blind! I didn't see the video!

But, I do like long distance burning!
 




Top