Mar 29, 2008 #1 S SargeMX5 0 Joined Dec 28, 2007 Messages 185 Points 18 Using the LM317T, is there a way to use it so that it will push out 1000mA of current @ 3.7v?
Mar 29, 2008 #2 MarioMaster 0 Joined Jul 27, 2007 Messages 3,642 Points 63 LM317's can handle up to 1.5 amps (1500ma) with appropriate heatsinking
Mar 29, 2008 #3 FireMyLaser 0 Joined Jan 12, 2008 Messages 3,290 Points 83 Use a 1.25 ohm resistor, min 1.25W and with a heatsink.
Mar 29, 2008 #4 N nikokapo 1 Joined Dec 26, 2007 Messages 6,129 Points 0 yup, get a nice heatsink....(good copper one ftw...but others can be used too...)
Mar 29, 2008 #5 S SargeMX5 0 Joined Dec 28, 2007 Messages 185 Points 18 Ok, im going to try get a 3watt 1.25 or 1.4ohm resistor and im going to cut up an old chipset heatsink and mount that to the thing. Thanks for the info people.
Ok, im going to try get a 3watt 1.25 or 1.4ohm resistor and im going to cut up an old chipset heatsink and mount that to the thing. Thanks for the info people.