Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

all laser websites and/or companies known post here

Status
Not open for further replies.





G

goopd

0
Joined
Aug 30, 2009
Messages
1
Points
0
HottestDealsEver

i came across this website a few months ago, they sell laser pointers (among other sweet gadgets) for the lowest prices i've ever seen. i bought a 50mw laser from them, and i absolutely love it, no problems with it at all. i would highly recommend buying from them.
 
ultimatehacker

ultimatehacker

0
Joined
Jul 13, 2009
Messages
167
Points
0
are there anymore websites selling laser parts(laser diodes,modules,circuts, etc.)?

ps, im thinking about building an x ray (no, im not going to x ray myself, just my game systems and my blue laser)

and do u know where i can buy a 250mW+ blue laser diode for cheap (the cheapest i found was $40 and a whole kit for about $65) this is the story:
I build a blue laser 150mW. i put it in a case and everything, it was BEAUTIFUL, then...:cryyy: my batteries ran out of power... and my dad gave my a really old looking 9v battery, he said it was new(as in, never used) (so, i turned off my laser, turned the current as low as possible, took out the battery, and replaced it. i turned my laser back on an a flash of blue light came on and ended, i think my laser broke.) so i am wondering, can i replace my 150mw laser diode with the 250mw w/ the same driver?
 
Darkarmyofone

Darkarmyofone

0
Joined
May 12, 2009
Messages
1,403
Points
0
Check it, Welcome to Dark Lasers!

I'll have 90% of everything back in stock soon, but you may find some usefull DIY items there, I have quite the selection :)

Hope you find something that will help you along,

As for getting another 250mW plus diode, you'll need a 6x GGW diode, and they dont run too cheap, i think the diode you found is refering it's power level THROUGH a 405-G1 lens. not through a regular lens. so thats probably NOT a 250mW+ blu-ray diode... maybe a 4x 150mW diode.

And also, it all depends on what driver you have, if it's a RKCSTR, or flexdriver, you'll need to adjust the current accordingly. if it is some offbrand driver, it MAY be adjustable but i doubt it. I wouldnt risk trying until you actually measure the set output of the driver you have.

If you need any help, just PM me, hope it gets working for ya :)

Tyler - Dark Lasers
 
ndrew2505

ndrew2505

0
Joined
Feb 23, 2008
Messages
2,832
Points
48
Darkarmyofone said:
Check it, Welcome to Dark Lasers!

I'll have 90% of everything back in stock soon, but you may find some usefull DIY items there, I have quite the selection :)

Hope you find something that will help you along,

As for getting another 250mW plus diode, you'll need a 6x GGW diode, and they dont run too cheap, i think the diode you found is refering it's power level THROUGH a 405-G1 lens. not through a regular lens. so thats probably NOT a 250mW+ blu-ray diode... maybe a 4x 150mW diode.

And also, it all depends on what driver you have, if it's a RKCSTR, or flexdriver, you'll need to adjust the current accordingly. if it is some offbrand driver, it MAY be adjustable but i doubt it. I wouldnt risk trying until you actually measure the set output of the driver you have.

If you need any help, just PM me, hope it gets working for ya :)

Tyler - Dark Lasers
Click to expand...

disinformation-: false information deliberately and often covertly spread (as by the planting of rumors) in order to influence public opinion or obscure the truth

you can barely get 250mW out of a ggw at seriously overdriven currents even with a 405 g-1 lens. dont believe the hype....
 
E

eddie

0
Joined
Jun 1, 2009
Messages
4
Points
0
amazing1.com is where i buy my lasers, all CNI products, I have purchased several from them, Eddie.
 
Invader Zim

Invader Zim

0
Joined
Jul 23, 2009
Messages
115
Points
18
ultimatehacker said:
are there anymore websites selling laser parts(laser diodes,modules,circuts, etc.)?

ps, im thinking about building an x ray (no, im not going to x ray myself, just my game systems and my blue laser)

and do u know where i can buy a 250mW+ blue laser diode for cheap (the cheapest i found was $40 and a whole kit for about $65) this is the story:
I build a blue laser 150mW. i put it in a case and everything, it was BEAUTIFUL, then...:cryyy: my batteries ran out of power... and my dad gave my a really old looking 9v battery, he said it was new(as in, never used) (so, i turned off my laser, turned the current as low as possible, took out the battery, and replaced it. i turned my laser back on an a flash of blue light came on and ended, i think my laser broke.) so i am wondering, can i replace my 150mw laser diode with the 250mw w/ the same driver?
Click to expand...
This is EXACTLY what happened to me except it was with a phr. And after thatI bought another from Darklasers in an aixiz module and ran it at 120mA with a rckstr driver but it LED'd right when I turned it on. So I broke two.
 
T

tommyzou

0
Joined
Oct 15, 2009
Messages
1
Points
0
Darkarmyofone

Darkarmyofone

0
Joined
May 12, 2009
Messages
1,403
Points
0
Hey Zim, maybe you got a weak diode or something, why dont you send me the dead ones, and maybe i can figure out if it was the diode or not, i'd be happy to help :)

I have 14 pre-installed PHR's up for sale on darklasers right now for 14.99, grab em up!

Tyler - Dark Lasers
 
ColdStl

ColdStl

0
Joined
Nov 22, 2008
Messages
1,267
Points
38
Tyler, you may want to mention that your 10% off coupon is only good 1 time. Customers may want to save that option for a bigger purchase.
 
Status
Not open for further replies.




Top