Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

What is needed to get a B&W Tek up and lasing

Joined
Feb 21, 2013
Messages
5,013
Points
0
I found a B&W Tek laser for a decent amount of money but it sounds like the seller just doesnt know what he has. He said it comes with the laser and control module. From the photos it looks like the cable coming from the laser is male 15 pins (module has a female 15 pin input for this cable). Then there is a male 9 pin output from the control module. My question is what is needed to power this bad boy, where can I get one and how much.

I am taking a HUGE risk by dropping what im assuming is a few hundred on this set up (depending on the price of the PSU). This will be my first lab laser and its of a wavelength that id LOVE LOVE LOVE to own. Sorry for not posting links or names but this is something I want to keep secret/under wraps until i get an idea of price. If its something im not able to afford or interested in then by all means ill share my source to anyone interested. He has about 6 B&W lasers so im asking about a bundle in hopes that 1 of them will work :D
 





Joined
Jul 4, 2012
Messages
2,834
Points
63
I saw the listing as well, but ill let you get em. The title and description says "for parts not working", then further down it says "these have been tested, and work". So IDK what thats about, seems fishy to me..
 
Joined
Mar 27, 2013
Messages
2,416
Points
63
If it says not working, assume not working... even if it says it's ok in the description, could've been a copy-paste typo or something
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
I saw the listing as well, but ill let you get em. The title and description says "for parts not working", then further down it says "these have been tested, and work". So IDK what thats about, seems fishy to me..

Listing :thinking: if you are talking about a greedbay listing then we are not even in the same ballpark. Found this one on another website and contacted the seller, he said he had 5 or 6 laying around that were purchased from a college "estate" sale so to speak. IDK the proper wording but i know UMass does it all the time and they sell some KICK A$$ lab lasers for dirt cheap, they dont do them often but when they do it again im bringing a few grand and cleaning house!

Anyways, thanks for the advice on the working/not working but its a risk i think im willing to take. Just need to know the PSU situation. I cant seem to locate one or info on them anywhere. Probably not searching the right terms since this would be my first lab lasers
 

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
Think I've got an old PS if you need one for it.
 
Joined
Jul 4, 2012
Messages
2,834
Points
63
Listing :thinking: if you are talking about a greedbay listing then we are not even in the same ballpark. Found this one on another website and contacted the seller, he said he had 5 or 6 laying around that were purchased from a college "estate" sale so to speak. IDK the proper wording but i know UMass does it all the time and they sell some KICK A$$ lab lasers for dirt cheap, they dont do them often but when they do it again im bringing a few grand and cleaning house!

Anyways, thanks for the advice on the working/not working but its a risk i think im willing to take. Just need to know the PSU situation. I cant seem to locate one or info on them anywhere. Probably not searching the right terms since this would be my first lab lasers

Ah- my bad. How much are you getting them for?
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
ARG if you do have one please PM me with info and pricing. I know shipping might be a little on the rough side depending on size but we can talk about it.

Pricing varies. He has a few that are "died" for i believe somewhere around $40 (dont recall since they are dead and idc for them). The weak unit is around $90 and the stronger ones are around $100. He doesnt have a LPM but he says they lase obviously i wont buy without evidence. Ill prob try and talk him down on a combo deal and see what else he has laying around
 
Joined
Jul 4, 2012
Messages
2,834
Points
63
nice. i would snag one too if i came on that deal- best of luck getting them running. I have seen several people get the "10mW" units up to ~80mW, by realigning, taking off the photodiode, etc etc.
 
Joined
Dec 11, 2011
Messages
4,364
Points
83
Re-alignment on these is fairly straight forward, albeit hairy and tedious. If the unit lases and doesn't overhear then you can usually jury rig the TECs and PDs and do a realignment to max out the output. They're solid lil buggers. I got mine to do I think 76mW before I sold it off.
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
So as long as there is some light coming from them then you can pretty much realign them to laser properly? I think one of the "died" ones was considered dead since it was all jacked up and didnt have a "dot" but scattered light
 

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
ARG if you do have one please PM me with info and pricing. I know shipping might be a little on the rough side depending on size but we can talk about it.

I got no use for it, just pay shipping. It's a little heavy though. Don't have access to it until the weekend, can let you know shipping then.
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
You guys need to get MarioMaster to help.... he has done work on dozens of these same labbies-

I have two --destined for LUMIA IIRC I got one for ~$70 and the second sold as "for parts only' for 35$ BOTH worked fine and the 70 $ one only made one mW more-

I do know this ALL TOO WELL do NOT brush the back of your hand across the driver- OUCH!!!! very painful bite I got!! I have not changed anything on mine (yet)- i hope some info that is valid will be posted in this thread-- hak


BTW if a search had been made the other threads would have been a good place to go with this one.
 
Last edited:
Joined
Feb 21, 2013
Messages
5,013
Points
0
Alex, yes please let me know on the PSU. im definitely interested in that bad boy

Hak, I did a search and saw that MarioMaster had like 8x 473nm ones so im going to PM him if i get a "broken" one and it looks too complex for me. I mean anything over basic soldering prob wont happen since i wont be able to use my right arm for 4-6 weeks starting xmas eve.......dang surgery! Already trying to get a "back up" set up for my Kryton build if i dont get all the parts in time to build it myself. I want to build it myself but if surgery arrives first i want to send the parts to a trusted builder to assemble so i can use it while i recover!
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
Hope your recovery happens fast-- and they fix your broken wing.

I did fairly serious damage to the bicep on my right arm and thinking it was something that would heal I did not show this to a doctor until it was too late- I tore tendons or something and the bicep- is now permanetly messed up- all I need to do to 'flex' is raise my arm- hk
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
Hope your recovery happens fast-- and they fix your broken wing.

I did fairly serious damage to the bicep on my right arm and thinking it was something that would heal I did not show this to a doctor until it was too late- I tore tendons or something and the bicep- is now permanetly messed up- all I need to do to 'flex' is raise my arm- hk

Actually surgery is to remove melanoma. Wish it was something other than cancer :( Already had one surgery but need another to get it all.
 




Top