Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Blue, Yellow, & Other Colored Lasers



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 07-26-2010, 03:51 AM #65
aryntha's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
aryntha aryntha is offline
Class 3R Laser
aryntha's Avatar
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

My 'sweet spot' seems to be 530mA. It'll 'flash bright' at 600mA but quickly drops down, so I haven't kept it up there too much. My "start of lasing" point is 410mA. It gets brighter and brighter until 530mA, but only lasts a few minutes there. Anything higher than that, it dives very quickly.

I seem to get much better stability with the 'dumb' supply. I wish I knew which leads here were essentially power output, so I could measure the output of the 'dumb' supply.

But, yeah, I'm not spending too much time at the higher currents just in case.


__________________

3392nm:REO LHIP HeNe 2mW ∙ 980nm:OLIKE 155mW

808nm:OLIKE 200mW ∙ JETL PLC 600mW(682pk)
780nm:OLIKE 120mW
685nm:18650 47mW
671nm:PGL3M 281mW DPSS ∙ PGL3C 278mW
655nm:LOC 254mW ∙ OLIKE 221mW ∙ Yob 320mW
638nm:Sanyo 40mW ∙ HL63133 200mW ∙ PGL3C 463mWpk ∙ ML520 700mW
633nm:JDS1145 HeNe 28mW ∙ JDS1145 HeNe 26mW
612nm:MG 05LOR151 HeNe 3mW ∙ REO LSTP 3mW
609nm:REO LHOR 1mW
604nm:REO LSTP 2mW
594nm:Rigel 3mW ∙ LG PGL3C 15mWpk ∙ Lasos 7512 3mW ∙ CNI MGL3 58mWpk
589nm:CNI PGL3C 106mW ∙ CNI PGL3C 85mW
561nm:CNI PGL3C 30mW(41pk)
556nm:CNI PGL3C 20mW(22pk)
544nm:JDS1675P HeNe 2mW ∙ REO LHGR 2mW ∙ Lasos 7786 2mW
532nm:PGL3C 150mW(180pk) ∙ PGL3C 578mWpk ∙ PLC 440mWpk
515nm:JDS 221420GL ArI 30mW
510nm:52mW DG#2 ∙ 50mW 26650 DG
488nm:Nlx DPSS 7mW ∙ JDS 2214 ArI 40mW ∙ JDS FCD488 DPSS 25mW
ML:MG 65A106025 ArI ML 115mW
476/480nm:Nichia Diode 28mW
473nm:PGL3A 45mW(80pk) ∙ PGL3C 110mWpk ∙ PGL3C 95mWpk ∙ RPLB-25 60mWpk
465nm:DTR NDB7676 2.03w
458nm:JDS 2214VL ArI 8mW ∙ JDS 2214VL ArI 12mW ∙ RHD Diode 1.7W
452nm:Osram SM 47mW
445nm:Yob 1410mW ∙ Polaris 156mW ∙ PGL3C 1200mW ∙ DTR-EHG 32650 2136mW
405nm:Yob 630mW ∙ Qfox 750mW ∙ JETL PLC 780mW
aryntha is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 07-26-2010, 03:55 AM #66
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Quote:
Originally Posted by aryntha View Post
Not long at all. I seem to get "action" between i 0.41 and i 0.6 ... Hopefully we can't go high enough to blow these things.... it's weird, it seems the "dumb" supply regulates it better... I'd love to see that "Laser Lock" LED go on, and somehow have it automate the current.
Send it the cp> (constant power, as opposed to ci, constant current) command then p [desired power in watts]> and that'll happen, but if you get a bad power fluctuation, it'll ramp up the current to make up for it. And it will keep ramping it up until it reaches 800mA, at which point the driver will shut off. I think even at that power the diodes will probably be fine, since they seem to have to push pretty hard to get the crystal to lase.

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success
Trevor is offline   Reply With Quote
Old 07-26-2010, 03:58 AM #67
Captain Dan's Avatar
Class 1M Laser
 
Join Date: Jun 2010
Posts: 212
Rep Power: 9
Captain Dan will become famous soon enoughCaptain Dan will become famous soon enough
Send a message via Skype™ to Captain Dan
Captain Dan Captain Dan is offline
Class 1M Laser
Captain Dan's Avatar
 
Join Date: Jun 2010
Posts: 212
Rep Power: 9
Captain Dan will become famous soon enoughCaptain Dan will become famous soon enough
Send a message via Skype™ to Captain Dan
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

I think I feel a tear coming. That is such a beautiful wavelength!
__________________
010001000110000101101110
Captain Dan is offline   Reply With Quote
Old 07-26-2010, 04:01 AM #68
aryntha's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
aryntha aryntha is offline
Class 3R Laser
aryntha's Avatar
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

hmm. Got some 'checksum error' returns on "p 0.05>"

This is what I did:

cs0>
cp>
p 0.05>
l1>

the "laser lock' light blinked a bit, no output, and it went into an error state.

EDIT: Okay, I'll want p0.005 that is, heh, whoops.
__________________

3392nm:REO LHIP HeNe 2mW ∙ 980nm:OLIKE 155mW

808nm:OLIKE 200mW ∙ JETL PLC 600mW(682pk)
780nm:OLIKE 120mW
685nm:18650 47mW
671nm:PGL3M 281mW DPSS ∙ PGL3C 278mW
655nm:LOC 254mW ∙ OLIKE 221mW ∙ Yob 320mW
638nm:Sanyo 40mW ∙ HL63133 200mW ∙ PGL3C 463mWpk ∙ ML520 700mW
633nm:JDS1145 HeNe 28mW ∙ JDS1145 HeNe 26mW
612nm:MG 05LOR151 HeNe 3mW ∙ REO LSTP 3mW
609nm:REO LHOR 1mW
604nm:REO LSTP 2mW
594nm:Rigel 3mW ∙ LG PGL3C 15mWpk ∙ Lasos 7512 3mW ∙ CNI MGL3 58mWpk
589nm:CNI PGL3C 106mW ∙ CNI PGL3C 85mW
561nm:CNI PGL3C 30mW(41pk)
556nm:CNI PGL3C 20mW(22pk)
544nm:JDS1675P HeNe 2mW ∙ REO LHGR 2mW ∙ Lasos 7786 2mW
532nm:PGL3C 150mW(180pk) ∙ PGL3C 578mWpk ∙ PLC 440mWpk
515nm:JDS 221420GL ArI 30mW
510nm:52mW DG#2 ∙ 50mW 26650 DG
488nm:Nlx DPSS 7mW ∙ JDS 2214 ArI 40mW ∙ JDS FCD488 DPSS 25mW
ML:MG 65A106025 ArI ML 115mW
476/480nm:Nichia Diode 28mW
473nm:PGL3A 45mW(80pk) ∙ PGL3C 110mWpk ∙ PGL3C 95mWpk ∙ RPLB-25 60mWpk
465nm:DTR NDB7676 2.03w
458nm:JDS 2214VL ArI 8mW ∙ JDS 2214VL ArI 12mW ∙ RHD Diode 1.7W
452nm:Osram SM 47mW
445nm:Yob 1410mW ∙ Polaris 156mW ∙ PGL3C 1200mW ∙ DTR-EHG 32650 2136mW
405nm:Yob 630mW ∙ Qfox 750mW ∙ JETL PLC 780mW

Last edited by aryntha; 07-26-2010 at 04:04 AM.
aryntha is offline   Reply With Quote
Old 07-26-2010, 04:05 AM #69
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Quote:
Originally Posted by aryntha View Post
hmm. Got some 'checksum error' returns on "p 0.05>"

This is what I did:

cs0>
cp>
p 0.05>
l1>

the "laser lock' light blinked a bit, no output, and it went into an error state.
You tried to set it to 50mW...

Not sure about the checksum error bit though; I'll look into it?

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success
Trevor is offline   Reply With Quote
Old 07-26-2010, 04:10 AM #70
aryntha's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
aryntha aryntha is offline
Class 3R Laser
aryntha's Avatar
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Have you had any success with a sequence like this?

cs0>
cp>
p 0.005>
l1>

?... Yeah, I went too high a few times here but everything seems to be OK still on the dumb supply. (fingers crossed)
__________________

3392nm:REO LHIP HeNe 2mW ∙ 980nm:OLIKE 155mW

808nm:OLIKE 200mW ∙ JETL PLC 600mW(682pk)
780nm:OLIKE 120mW
685nm:18650 47mW
671nm:PGL3M 281mW DPSS ∙ PGL3C 278mW
655nm:LOC 254mW ∙ OLIKE 221mW ∙ Yob 320mW
638nm:Sanyo 40mW ∙ HL63133 200mW ∙ PGL3C 463mWpk ∙ ML520 700mW
633nm:JDS1145 HeNe 28mW ∙ JDS1145 HeNe 26mW
612nm:MG 05LOR151 HeNe 3mW ∙ REO LSTP 3mW
609nm:REO LHOR 1mW
604nm:REO LSTP 2mW
594nm:Rigel 3mW ∙ LG PGL3C 15mWpk ∙ Lasos 7512 3mW ∙ CNI MGL3 58mWpk
589nm:CNI PGL3C 106mW ∙ CNI PGL3C 85mW
561nm:CNI PGL3C 30mW(41pk)
556nm:CNI PGL3C 20mW(22pk)
544nm:JDS1675P HeNe 2mW ∙ REO LHGR 2mW ∙ Lasos 7786 2mW
532nm:PGL3C 150mW(180pk) ∙ PGL3C 578mWpk ∙ PLC 440mWpk
515nm:JDS 221420GL ArI 30mW
510nm:52mW DG#2 ∙ 50mW 26650 DG
488nm:Nlx DPSS 7mW ∙ JDS 2214 ArI 40mW ∙ JDS FCD488 DPSS 25mW
ML:MG 65A106025 ArI ML 115mW
476/480nm:Nichia Diode 28mW
473nm:PGL3A 45mW(80pk) ∙ PGL3C 110mWpk ∙ PGL3C 95mWpk ∙ RPLB-25 60mWpk
465nm:DTR NDB7676 2.03w
458nm:JDS 2214VL ArI 8mW ∙ JDS 2214VL ArI 12mW ∙ RHD Diode 1.7W
452nm:Osram SM 47mW
445nm:Yob 1410mW ∙ Polaris 156mW ∙ PGL3C 1200mW ∙ DTR-EHG 32650 2136mW
405nm:Yob 630mW ∙ Qfox 750mW ∙ JETL PLC 780mW
aryntha is offline   Reply With Quote
Old 07-26-2010, 04:17 AM #71
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Quote:
Originally Posted by aryntha View Post
Have you had any success with a sequence like this?

cs0>
cp>
p 0.005>
l1>

?... Yeah, I went too high a few times here but everything seems to be OK still on the dumb supply. (fingers crossed)
Momentarily, but it seems to lose lock and ramp up the current out of control until it lights the error LED and turns off.

I wouldn't worry about going too high. Mine seems to have stood up nicely to the high (23mW) output - though I haven't managed to get it to be quite as solid at ~7mW as I did before that experiment.

I'll work with it more when I get home from work tomorrow, but I think I'm going to go ahead and head to bed for the night.

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success
Trevor is offline   Reply With Quote
Old 07-26-2010, 04:23 AM #72
aryntha's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
aryntha aryntha is offline
Class 3R Laser
aryntha's Avatar
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Okay well, either way, thanks, this is a significant amount of progress it seems... Still not sure where you found these commands, but perhaps it's a trade secret

Anyhow I think this thread is going to be a good resource going forward, to say the least.
__________________

3392nm:REO LHIP HeNe 2mW ∙ 980nm:OLIKE 155mW

808nm:OLIKE 200mW ∙ JETL PLC 600mW(682pk)
780nm:OLIKE 120mW
685nm:18650 47mW
671nm:PGL3M 281mW DPSS ∙ PGL3C 278mW
655nm:LOC 254mW ∙ OLIKE 221mW ∙ Yob 320mW
638nm:Sanyo 40mW ∙ HL63133 200mW ∙ PGL3C 463mWpk ∙ ML520 700mW
633nm:JDS1145 HeNe 28mW ∙ JDS1145 HeNe 26mW
612nm:MG 05LOR151 HeNe 3mW ∙ REO LSTP 3mW
609nm:REO LHOR 1mW
604nm:REO LSTP 2mW
594nm:Rigel 3mW ∙ LG PGL3C 15mWpk ∙ Lasos 7512 3mW ∙ CNI MGL3 58mWpk
589nm:CNI PGL3C 106mW ∙ CNI PGL3C 85mW
561nm:CNI PGL3C 30mW(41pk)
556nm:CNI PGL3C 20mW(22pk)
544nm:JDS1675P HeNe 2mW ∙ REO LHGR 2mW ∙ Lasos 7786 2mW
532nm:PGL3C 150mW(180pk) ∙ PGL3C 578mWpk ∙ PLC 440mWpk
515nm:JDS 221420GL ArI 30mW
510nm:52mW DG#2 ∙ 50mW 26650 DG
488nm:Nlx DPSS 7mW ∙ JDS 2214 ArI 40mW ∙ JDS FCD488 DPSS 25mW
ML:MG 65A106025 ArI ML 115mW
476/480nm:Nichia Diode 28mW
473nm:PGL3A 45mW(80pk) ∙ PGL3C 110mWpk ∙ PGL3C 95mWpk ∙ RPLB-25 60mWpk
465nm:DTR NDB7676 2.03w
458nm:JDS 2214VL ArI 8mW ∙ JDS 2214VL ArI 12mW ∙ RHD Diode 1.7W
452nm:Osram SM 47mW
445nm:Yob 1410mW ∙ Polaris 156mW ∙ PGL3C 1200mW ∙ DTR-EHG 32650 2136mW
405nm:Yob 630mW ∙ Qfox 750mW ∙ JETL PLC 780mW

Last edited by aryntha; 07-26-2010 at 05:31 AM.
aryntha is offline   Reply With Quote
Old 07-26-2010, 12:27 PM #73
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Quote:
Originally Posted by aryntha View Post
Okay well, either way, thanks, this is a significant amount of progress it seems... Still not sure where you found these commands, but perhaps it's a trade secret
In my research on these, I've found a list of commands that mostly work. I'll post that when I get a chance; I hadn't because when sending individual signals, it would be quite easy to accidentally damage the head. Now that it seems these heads can even take max current from the driver, I'm less worried about a slew of accidental head deaths. Just... please don't kill your head. I'll feel really bad.

Bruteforcing has also yielded several more commands that do things - but are undocumented. Those are a bigger issue. ><

Lastly, I've found control software that should work - I just need to get it to properly connect and stop faulting and crashing all over the place.

Quote:
Anyhow I think this thread is going to be a good resource going forward, to say the least.
Hopefully I can write some simple custom software to control these; give me a few minutes and I'll get those commands up.

EDIT: Here's the command lists.

These are for the current firmware: http://www.vuemetrix.com/support/tec..._commands.html

These are for legacy firmware (more relevant to us): http://www.vuemetrix.com/support/tec..._commands.html

Current control software version can be found here: http://www.vuemetrix.com/support/

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success

Last edited by Trevor; 07-26-2010 at 01:31 PM.
Trevor is offline   Reply With Quote
Old 07-26-2010, 05:18 PM #74
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Big update!

After a dialogue with Vuemetrix, turns out Novalux did indeed write their own software for these. However, no software shipped with the units. The computer-controlled power supplies we have are likely for testing the heads before loading the "dumb" power supply with the settings.

That being said, Vuemetrix's software, WinVue, does not play well with these drivers.

I'm going to start working on controller software. It'd be interesting to see about arduino-controlling these, so they're not tethered to a computer...

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success
Trevor is offline   Reply With Quote
Old 07-26-2010, 07:33 PM #75
aryntha's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
aryntha aryntha is offline
Class 3R Laser
aryntha's Avatar
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

See, there are rumors of the correct software floating around on alt.lasers on Usenet. I haven't been able to find it. But apparently it was there.

Someone out there has to have it, somewhere.

I've got an old Win2k machine that should work better with older software, if that'll help.
__________________

3392nm:REO LHIP HeNe 2mW ∙ 980nm:OLIKE 155mW

808nm:OLIKE 200mW ∙ JETL PLC 600mW(682pk)
780nm:OLIKE 120mW
685nm:18650 47mW
671nm:PGL3M 281mW DPSS ∙ PGL3C 278mW
655nm:LOC 254mW ∙ OLIKE 221mW ∙ Yob 320mW
638nm:Sanyo 40mW ∙ HL63133 200mW ∙ PGL3C 463mWpk ∙ ML520 700mW
633nm:JDS1145 HeNe 28mW ∙ JDS1145 HeNe 26mW
612nm:MG 05LOR151 HeNe 3mW ∙ REO LSTP 3mW
609nm:REO LHOR 1mW
604nm:REO LSTP 2mW
594nm:Rigel 3mW ∙ LG PGL3C 15mWpk ∙ Lasos 7512 3mW ∙ CNI MGL3 58mWpk
589nm:CNI PGL3C 106mW ∙ CNI PGL3C 85mW
561nm:CNI PGL3C 30mW(41pk)
556nm:CNI PGL3C 20mW(22pk)
544nm:JDS1675P HeNe 2mW ∙ REO LHGR 2mW ∙ Lasos 7786 2mW
532nm:PGL3C 150mW(180pk) ∙ PGL3C 578mWpk ∙ PLC 440mWpk
515nm:JDS 221420GL ArI 30mW
510nm:52mW DG#2 ∙ 50mW 26650 DG
488nm:Nlx DPSS 7mW ∙ JDS 2214 ArI 40mW ∙ JDS FCD488 DPSS 25mW
ML:MG 65A106025 ArI ML 115mW
476/480nm:Nichia Diode 28mW
473nm:PGL3A 45mW(80pk) ∙ PGL3C 110mWpk ∙ PGL3C 95mWpk ∙ RPLB-25 60mWpk
465nm:DTR NDB7676 2.03w
458nm:JDS 2214VL ArI 8mW ∙ JDS 2214VL ArI 12mW ∙ RHD Diode 1.7W
452nm:Osram SM 47mW
445nm:Yob 1410mW ∙ Polaris 156mW ∙ PGL3C 1200mW ∙ DTR-EHG 32650 2136mW
405nm:Yob 630mW ∙ Qfox 750mW ∙ JETL PLC 780mW
aryntha is offline   Reply With Quote
Old 07-26-2010, 07:41 PM #76
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Quote:
Originally Posted by aryntha View Post
See, there are rumors of the correct software floating around on alt.lasers on Usenet. I haven't been able to find it. But apparently it was there.

Someone out there has to have it, somewhere.

I've got an old Win2k machine that should work better with older software, if that'll help.
Hmm, so that may be Novalux's original software. I'm not sure I entirely believe the person I talked to... I think Novalux probably did indeed distribute software, but I can't be sure.

Unfortunately, it's more a problem of the software not being able to interpret the output of the controller (it'll complain about the input and eventually something will snap and it crashes), not that my machine is having trouble running it.

I guess my next hurdle is to figure out the second TEC in my head, and make sure it's working properly. Then I want to try and get a stable higher output. After that, I want to see about getting the "dumb" supply to behave better.

What's the latest on your system?

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success
Trevor is offline   Reply With Quote
Old 07-26-2010, 07:58 PM #77
aryntha's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
aryntha aryntha is offline
Class 3R Laser
aryntha's Avatar
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

I'm getting significantly better output, than out of the black "test" supply, using about 535mA. It outputs around 10-12mW vs the 7-8mW on the "test" supply. But it seems to heat up quickly and dim. No damage though.

However I still haven't been able to get any of the constant power requests to do anything but blink the "Lock" light and error out. For safety I've been trying p 0.002> to p 0.007>. But not one will light it so I assume there's probably something else I need to do , to set up the head that way.

I found the command to reset faults in there, so that's good. Don't have to unplug the supply anymore after each command. The "Checksum" error was caused by not issuing cs0>, which apparently turns some sort of checksumming off.

Here's a question, could these supplies be flashed to newer firmware -- and would we even want to do that? (Probably not.)

... I'll try to track down that Usenet copy of the original software, too, but I remember trying last year and I had no hits.
__________________

3392nm:REO LHIP HeNe 2mW ∙ 980nm:OLIKE 155mW

808nm:OLIKE 200mW ∙ JETL PLC 600mW(682pk)
780nm:OLIKE 120mW
685nm:18650 47mW
671nm:PGL3M 281mW DPSS ∙ PGL3C 278mW
655nm:LOC 254mW ∙ OLIKE 221mW ∙ Yob 320mW
638nm:Sanyo 40mW ∙ HL63133 200mW ∙ PGL3C 463mWpk ∙ ML520 700mW
633nm:JDS1145 HeNe 28mW ∙ JDS1145 HeNe 26mW
612nm:MG 05LOR151 HeNe 3mW ∙ REO LSTP 3mW
609nm:REO LHOR 1mW
604nm:REO LSTP 2mW
594nm:Rigel 3mW ∙ LG PGL3C 15mWpk ∙ Lasos 7512 3mW ∙ CNI MGL3 58mWpk
589nm:CNI PGL3C 106mW ∙ CNI PGL3C 85mW
561nm:CNI PGL3C 30mW(41pk)
556nm:CNI PGL3C 20mW(22pk)
544nm:JDS1675P HeNe 2mW ∙ REO LHGR 2mW ∙ Lasos 7786 2mW
532nm:PGL3C 150mW(180pk) ∙ PGL3C 578mWpk ∙ PLC 440mWpk
515nm:JDS 221420GL ArI 30mW
510nm:52mW DG#2 ∙ 50mW 26650 DG
488nm:Nlx DPSS 7mW ∙ JDS 2214 ArI 40mW ∙ JDS FCD488 DPSS 25mW
ML:MG 65A106025 ArI ML 115mW
476/480nm:Nichia Diode 28mW
473nm:PGL3A 45mW(80pk) ∙ PGL3C 110mWpk ∙ PGL3C 95mWpk ∙ RPLB-25 60mWpk
465nm:DTR NDB7676 2.03w
458nm:JDS 2214VL ArI 8mW ∙ JDS 2214VL ArI 12mW ∙ RHD Diode 1.7W
452nm:Osram SM 47mW
445nm:Yob 1410mW ∙ Polaris 156mW ∙ PGL3C 1200mW ∙ DTR-EHG 32650 2136mW
405nm:Yob 630mW ∙ Qfox 750mW ∙ JETL PLC 780mW
aryntha is offline   Reply With Quote
Old 07-26-2010, 08:05 PM #78
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Quote:
Originally Posted by aryntha View Post
I'm getting significantly better output, than out of the black "test" supply, using about 535mA. It outputs around 10-12mW vs the 7-8mW on the "test" supply. But it seems to heat up quickly and dim. No damage though.
I got stable output when I had it sitting on top of a HUGE heatsink. I'll post photos this evening when I inevitably spend the whole evening working on this.

Quote:
However I still haven't been able to get any of the constant power requests to do anything but blink the "Lock" light and error out. For safety I've been trying p 0.002> to p 0.007>. But not one will light it so I assume there's probably something else I need to do , to set up the head that way.
I don't think these are well-suited for that... or, it's why they're on eBay.

Quote:
I found the command to reset faults in there, so that's good. Don't have to unplug the supply anymore after each command. The "Checksum" error was caused by not issuing cs0>, which apparently turns some sort of checksumming off.
Sorry, I meant to pass that along to you... but now you have the list. The checksums are to catch typos (transpositions, etc.) from what I understand. It's the Verhoeff algorithm.

Quote:
Here's a question, could these supplies be flashed to newer firmware -- and would we even want to do that? (Probably not.)
No way we'd be able to get it.

Quote:
... I'll try to track down that Usenet copy of the original software, too, but I remember trying last year and I had no hits.
As will I.

More info to come!

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success
Trevor is offline   Reply With Quote
Old 07-29-2010, 02:09 AM #79
Trevor's Avatar
Class 3B Laser
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Trevor Trevor is offline
Class 3B Laser
Trevor's Avatar
 
Join Date: Jul 2009
Location: Boulder, CO
Posts: 4,506
Rep Power: 2565
Trevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond reputeTrevor has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Okay... latest news. I got my system to stabilize quite nicely.
  • The onboard power meter was reading 0.74 - which I believe is 7.4mW.
  • This is the second time I've got the system stabilized at this power.
  • Both times I had it sitting on a large heatsink.
  • The primary TEC in my head will not heat or cool, all I can do is get a thermal reading off of it - about 35.5C both times. Sitting on the heatsink, the pump diode heats up to this temperature then stays there.
  • I had the crystal heated to 29.35C.
  • The current was at 466mA.

Here's the setup:



Near the end of the run this time, the heatsink was slightly warm to the touch, and the power dropped to a reading of 0.72 over 3-4 minutes. I think if I actively cool the heatsink, the power will be rock-solid stable. Unfortunately, this hyothetical 7.4mW is nowhere near the 15mW rating of this head, but we'll see.

-Trevor
__________________
Code:
23:10 <ARG>    nothing has blown up yet :)
23:10 <Trevor> that is a distressingly low standard for success
Trevor is offline   Reply With Quote
Old 07-29-2010, 02:49 AM #80
aryntha's Avatar
Class 3R Laser
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
aryntha aryntha is offline
Class 3R Laser
aryntha's Avatar
 
Join Date: Nov 2009
Location: Evergreen, CO
Posts: 2,027
Rep Power: 2778
aryntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond reputearyntha has a reputation beyond repute
Default Re: A little on my Novalux 488nm DPSS. *PICS.*

Trevor - did you get ahold of the software to do this? Or are you using the ci / constant current mode at 0.46? Judging by your lock light I'm guessing CI with i 0.46?

I'll give this a shot tonight too. I'm guessing "adp?" reads the current power.

Either way not bad. Not 15mW, no. But not bad for what it is.
__________________

3392nm:REO LHIP HeNe 2mW ∙ 980nm:OLIKE 155mW

808nm:OLIKE 200mW ∙ JETL PLC 600mW(682pk)
780nm:OLIKE 120mW
685nm:18650 47mW
671nm:PGL3M 281mW DPSS ∙ PGL3C 278mW
655nm:LOC 254mW ∙ OLIKE 221mW ∙ Yob 320mW
638nm:Sanyo 40mW ∙ HL63133 200mW ∙ PGL3C 463mWpk ∙ ML520 700mW
633nm:JDS1145 HeNe 28mW ∙ JDS1145 HeNe 26mW
612nm:MG 05LOR151 HeNe 3mW ∙ REO LSTP 3mW
609nm:REO LHOR 1mW
604nm:REO LSTP 2mW
594nm:Rigel 3mW ∙ LG PGL3C 15mWpk ∙ Lasos 7512 3mW ∙ CNI MGL3 58mWpk
589nm:CNI PGL3C 106mW ∙ CNI PGL3C 85mW
561nm:CNI PGL3C 30mW(41pk)
556nm:CNI PGL3C 20mW(22pk)
544nm:JDS1675P HeNe 2mW ∙ REO LHGR 2mW ∙ Lasos 7786 2mW
532nm:PGL3C 150mW(180pk) ∙ PGL3C 578mWpk ∙ PLC 440mWpk
515nm:JDS 221420GL ArI 30mW
510nm:52mW DG#2 ∙ 50mW 26650 DG
488nm:Nlx DPSS 7mW ∙ JDS 2214 ArI 40mW ∙ JDS FCD488 DPSS 25mW
ML:MG 65A106025 ArI ML 115mW
476/480nm:Nichia Diode 28mW
473nm:PGL3A 45mW(80pk) ∙ PGL3C 110mWpk ∙ PGL3C 95mWpk ∙ RPLB-25 60mWpk
465nm:DTR NDB7676 2.03w
458nm:JDS 2214VL ArI 8mW ∙ JDS 2214VL ArI 12mW ∙ RHD Diode 1.7W
452nm:Osram SM 47mW
445nm:Yob 1410mW ∙ Polaris 156mW ∙ PGL3C 1200mW ∙ DTR-EHG 32650 2136mW
405nm:Yob 630mW ∙ Qfox 750mW ∙ JETL PLC 780mW

Last edited by aryntha; 07-29-2010 at 02:53 AM.
aryntha is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: http://laserpointerforums.com/f40/little-my-novalux-488nm-dpss-pics-52813.html
Posted By For Type Date
Post your interesting eBay finds... - Page 26 This thread Refback 04-16-2011 09:12 AM










Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 04:04 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC