Gold plated, Dual Flexdrive, 2w+ 470nm Mini

Difficult mod
Jetbeam Tea 20 Titanium Gold Plated
Measures exactly 10cm by 2cm
Both Flexdrive,s set to 1.3a each
NDB 7675 diode
20mm DTR module, resized, milled and drilled
G2 lens
14500 IMR battery


Planned this a while back, I was sent the smaller Jetbeam Tea 30 first
Then I ordered the larger Tea 20 and finally got it a month later,

Had trouble getting the head opened, then found a solid Titanium blockage in the head that I had to drill out,

It's a very solid host so I had to bore out a millimetre from the head and even then only 15mm diameter for my module,

10 individual wires to join in a 1cm by 4mm space,

Then my pots were moving while pushing the module in the head so had to remove drivers with a razer blade reset them and then used a little thermal adhesive on the inner side of the pots to secure them,

The module is a very tight fit, It starts warming up after 20 seconds witch is just fine with me,

Just over 2w of 470nm then instantly starts dropping slowly,

What more can I say, love that it worked out and got it done,

Jetbeam continued,

Jetbeam continued 1

Jetbeam continued 2

Jetbeam continued 3

Cool, glad to see that you got it apart without any damage! Good job on the host and HS mods, she's definitely a keeper! :beer:
:gj:

Very nice, love the builds in the small host. Two watts of 470 is plenty for a host that size. Once again excellent job, and I agree that's a keeper!! Enjoy

Hi
Awesome as usual buddy always a treat to see you builds. Priceless

Rich):

Very nice build!