Helios
0
- Joined
- Jan 7, 2011
- Messages
- 1,341
- Points
- 48
I didnt even think about fiber. That could be a great solution since there would be negligible weight.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Cutting laser?
- Thread starter LPF Dude
- Start date
I didnt even think about fiber. That could be a great solution since there would be negligible weight.
- Joined
- Jan 2, 2009
- Messages
- 11,800
- Points
- 0
Thats what most of them use IIRC. Its not that much money either.
- Joined
- Feb 28, 2011
- Messages
- 66
- Points
- 0
I don't think you can get fibers that work with CO2 wavelengths, for the same reason that a CO2 laser cuts glass and acrylic, its absorbed by near enough everything.
Last edited:
Helios
0
- Joined
- Jan 7, 2011
- Messages
- 1,341
- Points
- 48
Well their are certain materials which they use for optics that the wavelength travels through. I dont know much about that area though. Someone else will chime in im sure.
- Joined
- Feb 28, 2011
- Messages
- 66
- Points
- 0
The only materials I know of that pass that wavelength is salt (NaCl) zinc selenide and germanium. Im pretty sure you can't get any of those in a flexible fiber form, unfortunatly.Helios said:
Last edited:
piferal
0
- Joined
- Apr 5, 2011
- Messages
- 1,161
- Points
- 0
Yes, exists a special type of flexible optical fiber for CO2 laser used in neurosurgery.
These special fibers are different from conventional ones because the core is hollow and surrounded by multiple layers (coated) of microcrystals mirrors.
I think it would be too expensive for your application
These special fibers are different from conventional ones because the core is hollow and surrounded by multiple layers (coated) of microcrystals mirrors.
I think it would be too expensive for your application
Last edited:
- Joined
- Jan 2, 2009
- Messages
- 11,800
- Points
- 0
I did see the thread by "Things", and he used mirrors, though I haven't yet seen or figured out how he compensated for the change of distance. I think I'm going to re-engineer the head to hold the whole tube, but I need to add limit switches first so I don't accidentally break the tube if I overshoot. The tube is a couple feet long, so will stick up over the top of the machine. The weight should not be an issue, but I'll have to engineer the tube-support plate to grip the tube at multiple locations along it's length.
Yes, I think I should move this to the gas lasers sub-forum now. Thanks for the info!
Yes, I think I should move this to the gas lasers sub-forum now. Thanks for the info!
benmwv
0
- Joined
- Sep 10, 2010
- Messages
- 1,380
- Points
- 48
I think you should try and avoid putting the laser on the head.
The best way I can think of is to mount one mirror on the bar (bouncing it to the head) and one on the head (bouncing it down) and a lens to focus it to a point.
Kinda hard to explain. I'll make a pic
The red is where your co2 laser should be mounted, the white things are mirrors, and the blue dot is a lens. The pink shows your beam.
The best way I can think of is to mount one mirror on the bar (bouncing it to the head) and one on the head (bouncing it down) and a lens to focus it to a point.
Kinda hard to explain. I'll make a pic
The red is where your co2 laser should be mounted, the white things are mirrors, and the blue dot is a lens. The pink shows your beam.
- Joined
- Feb 28, 2011
- Messages
- 66
- Points
- 0
Thanks Tech_Junkie, you've reminded me I need to keep up with the times
Never seen stuff like that before...
Never seen stuff like that before...
The beam width of the output of a CO2 laser doesn't really change much over the distances used in these applications, so the focus is pretty much spot on for the entire cutting area. That is, if it's the focus you are worried about.
- Joined
- Aug 22, 2009
- Messages
- 404
- Points
- 0
Things has the design that is used by professional co2 cutting systems.
Co2 has some of the best divergence that you can get in a laser. However, the beam is not "small" and you need a ZnSe lens to culminate the output.
Co2 has some of the best divergence that you can get in a laser. However, the beam is not "small" and you need a ZnSe lens to culminate the output.
Bluefan
0
- Joined
- Aug 15, 2009
- Messages
- 1,443
- Points
- 48
co2 lasers have a relatively high divergenge because of the long wavelength. Because it's a gas laser and those usually have a good quality beam profile it's not that bad, but gas lasers like a HeNe or argon do much better. A YAG laser (also used for cutting and stuff) will have a lower divergence than a co2 unless it has a high order multimode output.
