Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

B&W Tek BWB-10-OEM - 473nm 10mW






Cam453

0
Joined
Jun 8, 2011
Messages
169
Points
0
It just seems so blue though..... Although it will probably be a while before I build my own 445. That much power seems like it's too much.
 
Joined
Mar 26, 2010
Messages
3,220
Points
0
The one this thread is about.
473 nm Blue Laser, DPSS, B&W Tek BWB-10-OEM | eBay
Apparently some would peak around 30mw?

The key operative being 'some'. Just don't be disappointed if you can't get one over 10 - 15mW out of it.. Or if it dies quickly from running it without feedback.

I have about 5 of these things. Of the 5, I have ONE that I managed to get a stable 30mW out of. The rest won't really do much more than 15mW or so even after driver tweaks and running them without feedback.

Though the one that does 30mW with feedback started out doing right at 10mW out of the box, and had a V5 driver, where the rest of the units i've gotten were doing only 5 or 6 mW and had V4 drivers. The V5 drivers have a lot more adjustments than the V4's do.


I also don't get everyone's hangup here about 'peak' power. To me peak power is useless. What matters is average stable power, since that's what people are going to be dealing with with CW lasers. I've had no shortage of cheap greens that will spike at 2-3 times their stable running power for a second or so at turn on. So i'm not sure what's to be gained by calling them "50mW" lasers when in actuality, they're only really running around 15mW while your actually using them.
 

Cam453

0
Joined
Jun 8, 2011
Messages
169
Points
0
It may only be some but that's still better than them being limited to 10mw. I'd be happy if it came like that straight out of the box let alone any higher.
 
Joined
Mar 26, 2010
Messages
3,220
Points
0
Very few people get them with the V5 drivers. But it's your laser. I'm not against people experimenting. After all I have 5 for that very purpose heh.. If you want to play with DPSS.. There's lots of good parts in these.
 

Cam453

0
Joined
Jun 8, 2011
Messages
169
Points
0
Ok I think I'll have to collect funds for one of these. I just need the second half of the payment for the last laser I sold.... :whistle:
 
Joined
Jun 13, 2007
Messages
5,410
Points
113
I just picked up some of these lasers. I bought mostly the "defective" units but I got a working one too. I can't wait to play around with them.
 
Joined
Mar 26, 2010
Messages
3,220
Points
0
I got my fiber coupled one a while ago. It does about 7mW straight out of the laser, 5 after the fiber and spectro head. This has to be one of the first ones i've got though that actually had a pure TEM00 output. Pretty much all the rest ran at some other mode.
 

Cam453

0
Joined
Jun 8, 2011
Messages
169
Points
0
I nearly bought the last one just now..... ten minutes later it was being resold as not working :wtf: good thing I waited I guess.
 
Last edited:




Top