Aquarius II | NDB7675

IsaacT · Jun 6, 2014

Thejoker301 said:
Nice , So it does seems to be significantly different than the 445nm diodes.

Really liked the pictures ! Thanks for sharing :beer:

Yeah this is a completely different beast. I keep turning it on randomly.

DTR said:
Great work. Glad to see the driver was replaced without any problems and that host is one of the best I have seen. Awesome build.:beer:

I love it! Just about shat my pants when I saw the driver. The worst part was not knowing if the pins were still attached. Had to finish cutting off the back half. Was lucky.

ultimatekaiser said:
Nice! I'd rep you but I can't. I was going to do something similar to this, but a bit bigger! looks kickass! gotta love blue...that's such a beautiful color

I'll take that rain check

bdgreenb · Jun 6, 2014

Awesome build! That color is too alluring. Think I know where my next paycheck is going. +1

RayJay · Jun 6, 2014

IsaacT said:
I hope you all enjoyed this build. I am running at 2.4A and have ZERO regrets...so far.

First of all congrats on the build! It's beautiful.. I hope to be doing one soon as well too.

Secondly, You are running it at 2.4A? Isn't the dropoff for these diodes like 1.8 or 1.9? Or is that the only driver you could find?

Again, Congrats.

IsaacT · Jun 7, 2014

bdgreenb said:
Awesome build! That color is too alluring. Think I know where my next paycheck is going. +1

Believe me, you won't regret it! It is an amazing diode for sure. Gives me great hope for the future of diode development. I want a 490 diode stat! lol.

RayJay said:
First of all congrats on the build! It's beautiful.. I hope to be doing one soon as well too.

Secondly, You are running it at 2.4A? Isn't the dropoff for these diodes like 1.8 or 1.9? Or is that the only driver you could find?

Again, Congrats.

The drop off is around 1.9A yes. Here is my reasoning:

1. I maimed the 2A driver I had purchased for it.
2. I already wanted to push this diode for a higher wavelength. If I wanted a burner I would go for a 3.5W diode. I just wanted as close to 473 as possible in a multiwatt build.
3. I figured these were just inefficient 9mm diodes which we regularly run at 2.4A.
4. I considered rated lifetimes and that I would likely not see this build's death as I would never likely reach anywhere near 5000 hours. Even cutting life in half wouldn't affect me much.

I hope that makes sense. Hopefully I never see it die, but I sort of already consider it worth it. The color is perfection.

----------------------------------------------------------------------------------------------------------------------

UPDATES:

I am going to be putting together a 445nm build soon so that I can do some side by side beam comparisons. This will be difficult but should be rewarding and insightful for those who are as of yet unready to take the plunge or for whom these diodes will never grace their hands.
Also, I am shipping it to Cyparagon for Spectrometering(is that a word?) so I should have some more info soon! Thanks again Cyp!

IsaacT · Jun 10, 2014

Update: Cyparagon has measured this laser's output to be 469nm! Which is very close to my estimation of 470nm. I am very pleased with this and also very grateful to Cyparagon for being so kind as to take time out of his day to do this for me.

Cheers :beer:
-Isaac

ZRaffleticket · Jun 10, 2014

Very impressive! That's exactly what RHD predicted from his data. Can't wait to see this myself.

Atomicrox · Jun 11, 2014

Fantastic!
Do you know if the 1.8A driver DTR uses can be set higher? After seeing this I'm more inclined to try 2-2.2A.

IsaacT · Jun 11, 2014

Yes, it can. I originally had him set it to 2A, but it is the same X-Drive I had in my 2.4A 9mm build, so I swapped them when the original driver met its untimely death.

Atomicrox · Jun 12, 2014

Cool. I might re-set mine when it gets here

ZRaffleticket · Jun 13, 2014

Just got mine up and running. Holy crap... I could hand this to anyone on the forum, say I bought a multimode 473, and they'd believe me.

Side by side with 473 was notably different. Though admittedly not much...

IsaacT · Jun 13, 2014

Yeah it is awesome. I love the color. I hope some pics of your build will make themselves known

Atomicrox · Jun 13, 2014

ZRaffleticket said:
Just got mine up and running. Holy crap... I could hand this to anyone on the forum, say I bought a multimode 473, and they'd believe me.

Side by side with 473 was notably different. Though admittedly not much...

How many Amps?

ZRaffleticket · Jun 14, 2014

Aye, it's a bit misty outside right now... it would be ideal to take some now.

Mine's at 2.4A as well. Also using a G-lens... haven't LPM'ed yet. No issues to speak of yet

IWIRE · Jun 14, 2014

Great build and a great job capturing the essence of the beam ! :beer:

IsaacT · Jun 21, 2014

Got a couple of comparison shots between this and a 445nm laser I built for Xirrious. The 445nm is 3W w/ G Lens and the 469nm is 1.7W w/ 3-Element Lens.

IWIRE · Jun 21, 2014

Dammit man ! THATS the shot I've been trying to capture. In my opinion you did a beautiful job of capturing the beams. Great pic, no, fantastic pic ! :beer: I'd REP ya again but it won't let me. You don't need anymore REP anyway

You got it goin' on and a beautiful pic !
Thanks for posting it !

Aquarius II | NDB7675

IsaacT

0

bdgreenb

0

RayJay

0

IsaacT

0

IsaacT

0

ZRaffleticket

0

Atomicrox

0

IsaacT

0

Atomicrox

0

ZRaffleticket

0

IsaacT

0

Atomicrox

0

ZRaffleticket

0

IWIRE

0

IsaacT

0

IWIRE

0

Online statistics

Forum statistics

Share this page