Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

505nm and 480nm diode RESULTS

  • Thread starter Deleted member 16589
  • Start date
NightExplorer96

NightExplorer96

0
Joined
Sep 5, 2013
Messages
8,549
Points
113
CynicalBrad said:
AND that "2 day" priority mail to them means less that 2 weeks or something crazy like that.
I once had a packag shipped from I believe texas to alabama take close to 40 days when it was shipped 2 day priority mail.

And it is good to see that you got your diode paul.
Click to expand...

Yep. I also sent about a year ago one of my lasers to a member in the Netherlands and it went to the Netherlands just fine, then went to Canada, then back to the Netherlands..... wtf..... :wtf: lol.

-Alex
 
Last edited:





ZRaffleticket

ZRaffleticket

0
Joined
Feb 4, 2010
Messages
3,281
Points
113
paul1598419 said:
I have a home health care nurse coming to do some wound care in a couple of hours. Then I will be busy pressing and metering the power and wavelengths of the 13 diodes I received from ZRaffleticket. As soon as I have enough of these done to get a good idea where they all will seem to going, I will post these results. It will probably be about 6 hours from now. :D
Click to expand...

Awesome - Looking forward to the results! I really wanna see how far these things can be pushed...

paul1598419 said:
I have an excellent story about networking. As most of you know, the 505nm diode that I was supposed get get last Saturday was delivered somewhere, but not to me. Yesterday, I saw a postal carrier next to my house and told her about my problems with the post office and how they claimed to have placed it at my front door and it was now my problem.

A few minutes ago that same postal carrier knocked on my door and handed me my package. She said she had found it two blocks over at another house and remembered my name and story and rushed over to give to me. Her name is Jody and I will not be forgetting her name any time soon.

However, the post office and their employees are scum, the way they tried to sweep this under the carpet and make it my problem and, to an extent, my fault.
Click to expand...

It's also really good to hear that the other diode got sorted out. With the post office operating in the red all the time I guess it's no wonder they just threw you under the bus. Sucks that it happens, but at least it all worked out!
 
paul1598419

paul1598419

0
Joined
Sep 20, 2013
Messages
17,526
Points
113
Well, here are some results everyone has been waiting for. It took much longer to set up and do the testing as I'm not getting around as well as I did just a few months ago.

I started off pressing one of the 480nm diodes and checking the wavelengths and power at increasing currents.

At 5.5 volts Vf and 58 mA it is 471nm. Not very high at all.
At 130 mA it was 473nm
At 145 mA it was 475nm
At 160 mA it was still 475nm and the power though a G-2 lens was 75 mW
At 175 mA it was 477nm and 81 mW
At 200 mA it was 478nm and 92 mW. BTW, at this current the Vf was 7.1 volts.

I stopped there, but berlieve it could be pushed harder. I was too afraid of possibly killing it to push it any harder than that. I will get around to the rest of the 9 480nm and 4 (now) 505nm soon and post my results here. I hope this has whet your interest for more results to come. :thanks: :D
 
Last edited:
ZRaffleticket

ZRaffleticket

0
Joined
Feb 4, 2010
Messages
3,281
Points
113
Also Paul, looks like the efficiency isn't dropping off at 200mA. It's actually still going up. Feel free to try pushing it a little more :)
 
paul1598419

paul1598419

0
Joined
Sep 20, 2013
Messages
17,526
Points
113
I have to be very careful as it is all on me if one of these dies. If you give me a current that you feel safe with me pushing it to, I will. Just lat me know what that limit is. If it dies then, I'm in the clear. :D
 
ZRaffleticket

ZRaffleticket

0
Joined
Feb 4, 2010
Messages
3,281
Points
113
Try it up to 225mA and see what it's outputting. If it's 104mW or less, cut it there. Otherwise go up to 250mA and no higher.

If it pops, it's on my hands, not yours. Do it for science :)

Edit: I had the math wrong on the previous post, before anyone comments. Oh well, doesn't change the fact I want to see this pushed 100mA more than rated for.
 
Last edited:
paul1598419

paul1598419

0
Joined
Sep 20, 2013
Messages
17,526
Points
113
Okay. I will go as far as 250 mA and no further. I'll do it slowly to try to minimize the risk. It's difficult to measure wavelength and power at the same time. As the light gets brighter I have to change my fiber optic cables position to get a reading that doesn't smash against the upper limit on the spectrometer.
 
AaronT

AaronT

0
Joined
Jun 12, 2016
Messages
320
Points
28
480nm at 100mw

This interests me greatly.

I might have to plan my first "low power" build using this.
 
Atomicrox

Atomicrox

0
Joined
Jun 22, 2011
Messages
2,431
Points
83
Thanks for testing, Paul!
With those results and the fact they are going to be generally available I'm inclined to push mine as well.
 
  • Like
Reactions: GSS
paul1598419

paul1598419

0
Joined
Sep 20, 2013
Messages
17,526
Points
113
Okay, guys. At 230 mA it hits 110 mW. I wasn't able to take a spectro reading too. Should I stop there or go for 250 mA? I'm waiting for the limit to take the next spectro reading as there is little need to know what this one diode will do all along the current curve.
 
Last edited:
Eracoy

Eracoy

0
Joined
Jul 21, 2014
Messages
173
Points
43
While I await my diodes from DTR's wonderful service, I wonder if it might be of interest to run some sort of "binning group buy" where we grab a large lot of diodes, bin them, and somehow sell them based on the wavelength. I certainly respect that buying stock diodes isn't influenced by binning (thanks DTR) but want the chance to have a more ideal wavelength, even if it costs something. That way there might also be a way for people who don't care about 1nm difference to save some money by getting a "less desirable" 504-506nm or something.
 
Last edited:
You must log in or register to reply here.




Top