D
Deleted member 16589
Guest
He said he thinks around 5.5
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
He said he thinks around 5.5
bdgreenb
0
- Joined
- Jul 20, 2011
- Messages
- 723
- Points
- 28
Owwwwie! Happy to see new wavelengths popping up and bridging that 470-515 gap. Thanks for taking the bullet on these guys. Looking forward to more data. :gh:
- Joined
- Jul 10, 2015
- Messages
- 9,908
- Points
- 113
I am almost afraid to ask, where do we buy these and how much are they?
Too soon?
Too soon?
- Joined
- Sep 4, 2016
- Messages
- 551
- Points
- 63
Seems to be limited quantity and sub $50.there are ten? at the moment? Going by the info scattered between this and the other thread.
the sample is out of stock apparently.
there were 10 diodes.
Zraffle and Laserman each grab 5 diodes.
now we have none.
looking to for a hit man to murder a 480nm diode.
If there are any hitman with the right tool and looking for a job pm me up.
what will i offer in return?
an offer you can't refuse.
that is one cool host.
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
Hi
I have a side button build coming up with a hex shaped sink and Knob with cooling fins cut in .
The 505 will get an X Boost to power it set to 125 or 130 mA .
But have to finish up on a few jobs first.
Rich
I have a side button build coming up with a hex shaped sink and Knob with cooling fins cut in .
The 505 will get an X Boost to power it set to 125 or 130 mA .
But have to finish up on a few jobs first.
Rich
BobMc
0
- Joined
- Apr 23, 2016
- Messages
- 3,685
- Points
- 113
Nice! :gj:
Hi
I have a side button build coming up with a hex shaped sink and Knob with cooling fins cut in .
Rich
Another fun one from Lifetime! Looking forward to checking the pics out. This sounds interesting.
- Joined
- Sep 4, 2016
- Messages
- 551
- Points
- 63
I think at first, Im going to do a pen build, and then later on, have a custom single 10440 or 14450 host made for it. Imagine a sanwu pocket putting out 476-480 :drool:
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
Hi BMNice! :gj:
Another fun one from Lifetime! Looking forward to checking the pics out. This sounds interesting.
I'm basically done but for the knob needs
Sanding and polished . And it's a green side button straight line no bell. It will take 1-18650 .
Rich
- Joined
- Sep 4, 2016
- Messages
- 551
- Points
- 63
Don't tempt me!
I just need to get a lathe and learn how to use it...
- Joined
- Sep 20, 2013
- Messages
- 17,446
- Points
- 113
Thanks, laserman121. Any new information is greatly appreciated.
- Joined
- Oct 14, 2012
- Messages
- 6,090
- Points
- 113
I'd put mine in a classic Jetlasers Ti-B titanium host! :yh:
Dutch67
0
- Joined
- Apr 9, 2016
- Messages
- 1,067
- Points
- 83
If you're good at working with your hands, do it! It's a lot of fun! Just use caution and read the manual/watch a lot of YouTube clips. While being fun it can be dangerous and extremely frustrating at first. I'm sure there are others willing to give you advice as well.
It's always good to have some machinists here. Everyone has a different creative style and variation is always nice to see!
