Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Merged 445nm Pictures and Video Thread

S

SpyderFire

0
Joined
May 27, 2010
Messages
423
Points
0
Here is the top of it

2710-img-0425.jpg


Here the optics just fall out after removing the aperture grill

2711-img-0426.jpg


underside, I haven't removed the ribbon yet.

2712-img-0427.jpg


One lens, I tdont have anything to measure the lens' dimensions.

2713-img-0428.jpg



I will mount a diode in an aixiz and one of these lenses in a jayrob modified aixiz metal nut, a flex drive set to 300mA.


Picture quality is not what it should be , I will try with a different camera tomorrow.
 
Last edited by a moderator:





Re: 445nm "sled" pics

I'm thinking that the glass lens is pretty nice. I don't know how it performs as far as focusing for burning.
 
Re: 445nm "sled" pics

SpyderFire said:
Here is the top of it

2710-img-0425.jpg


Here the optics just fall out after removing the aperture grill

2711-img-0426.jpg


underside, I haven't removed the ribbon yet.

2712-img-0427.jpg


One lens, I tdont have anything to measure the lens' dimensions.

2713-img-0428.jpg



I will mount a diode in an aixiz and one of these lenses in a jayrob modified aixiz metal nut, a flex drive set to 300mA.


Picture quality is not what it should be , I will try with a different camera tomorrow.
Click to expand...


If you need me to custom mount one of the lenses, just send it... (PM me)

Better yet, send a diode with it so we can both do testing! :D
 
Re: 445nm "sled" pics

jayrob said:
If you need me to custom mount one of the lenses, just send it... (PM me)

Better yet, send a diode with it so we can both do testing! :D
Click to expand...

I support this idea! :)
It´s time that this new born WL comes into the LPFworld
 
Re: 445nm "sled" pics

I'd like to know what is nominal current for these diodes. (20 000 hrs)
It can be tested if you do measurements when projector is ON.
 
Re: 445nm "sled" pics

ReNNo said:
I'd like to know what is nominal current for these diodes. (20 000 hrs)
It can be tested if you do measurements when projector is ON.
Click to expand...

i too would like to know this, but chances are hes already pulled it apart (i wouldve if i had 24 blue lasers just sitting there:D)
 
Re: 445nm "sled" pics

Will the same pins have the same polarity as, say a PHR diode ? Thanks, rob
 
Re: 445nm "sled" pics

I believe the pins are the same, the datasheet I looked at for another Nichia 445nm diode had the same pinouts as the PHRs, it looks like that pin configuration is the standard for these blue or violet LDs.
 
Re: 445nm "sled" pics

If you find a pin-out for this diode, will you post it in the DIODE COMPILATION THREAD, along with pertinent data, PLEASE ???? Thanks...............rob
 
Re: 445nm "sled" pics

Wow, also curious as to what the output will look like.

Keep up the good work.

I can't get any of these 444nm diodes over here in Korea. sucks.
 
You must log in or register to reply here.


Back
Top