Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

WTB: Spacer for clicky from Kriton V1 barrels

pwnstar

pwnstar

0
Joined
Sep 12, 2007
Messages
712
Points
0
WTB Spacer for clicky from Kriton V1 barrel. I know that if you have one you are probably using it, but just incase there is an extra floating around. Im looking for one and cant quite find somthing that fits from Home Depot.

Thanks,
-Grant
 





Prototype

Prototype

0
Joined
Jun 19, 2009
Messages
2,710
Points
0
I think he's talking about the small metal ring you have to squeeze the ends together on, that holds the switch in.
 
pwnstar

pwnstar

0
Joined
Sep 12, 2007
Messages
712
Points
0
Prototype said:
I think he's talking about the small metal ring you have to squeeze the ends together on, that holds the switch in.
Click to expand...

No im talking about the spacer between the switch and the rubber tail. I found the Retaining ring in Home Depot.


I have PM'd Kenom, I didnt get back a responce. I may ask someone to make one if I can measure the dimensions correctly, but I would need to take the tail apart on my other barrel to do that.
 
Last edited:
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
no, in the tailcap you put the silicone cover, then the "spacer" which i think is what he talkign about, then the clicky, then that retainer ring that your thinking of.
 
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
jayrob probably knows the dimensions....and if not prob has some krytons with him nd coud easily measure it up.....down side is he'll prob charge you $20-25 to have it made...

i would also contact ehgemus and flaminpyro.....they both have access to lathes and could machine something for you.

i could get it but it's pointless cause the cost would be so high for me to get it made, then drive 30 minutes away to pick it up and ship off ect..
 
pwnstar

pwnstar

0
Joined
Sep 12, 2007
Messages
712
Points
0
Mohrenberg said:
no, in the tailcap you put the silicone cover, then the "spacer" which i think is what he talkign about, then the clicky, then that retainer ring that your thinking of.
Click to expand...

Yes thanks, thats what im talking about. lol
 
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
heh i'm a deep abyss of knowledge w00t! pretty good for someoe whos never even seen a kryton in person huh? lol

anyways, you BEST bet is you get hold of kenom, and i seriously doubt he'll have one to offer you seeing as any he has are prob meant for a host....but you can at least get the measurements of the spacer from him....once you've got the measurements i would contact jayrob ehgemus and flaminpyro and find out who offers the best deal to have it made.....

i would contact them all now though, since one of them may already have a kryton and could measure the spacer for you...
 
pwnstar

pwnstar

0
Joined
Sep 12, 2007
Messages
712
Points
0
lol no reason to be sorry. Well if I dont find any washers that will work then I will try to get one made for me. The barrel only cost me 30$ so buying a spacer for 20$ is kind of alot. Still open if someone has one.

Anyone know if it is the same spacer used in the Kriton Groove?
 
pwnstar

pwnstar

0
Joined
Sep 12, 2007
Messages
712
Points
0
Darkarmyofone sold it to me with-out the tail cap assembly. I know it was a steal, I just happened to be online the time he posted it.
 
Darkarmyofone

Darkarmyofone

0
Joined
May 12, 2009
Messages
1,403
Points
0
Any luck??

And if you can get Jayrob to machine it for $20... now THATS a steal..

I dont think many people realize the machine-work involved in these things.

$20 for 30 mins of a Legends time... I'd pay $20 just for the opportunity to have a custom peice by Jay... "even though i have a million already"

lol! i guess you could call me a fan of Jayrob products ^_^

Anyways, Im sorry to hear you havent found the peice yet.

I speak with Jay daily, so i will try to remember to ask him, if he doesnt see this first anyways.

Tyler - Dark Lasers
 
pwnstar

pwnstar

0
Joined
Sep 12, 2007
Messages
712
Points
0
Lol Thanks dark, Flaminpyro just offered to machine it for me. I just need the dimmentions of the piece now. And I agree, Jayrob does do some nice work! I didn't realize Kenom had these pieces machined, I thought they were just bought the way they were like the retaining ring. I will PM jay or try Kenom again to find the exact size.
 
Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
PWNSTAR you Kriton V1 spacer is finished and will be on the way monday morning Thanks for your order. have a good weekend ! pyro... :eg:
 
You must log in or register to reply here.




Top