Mrcrouse
0
- Joined
- Jul 10, 2009
- Messages
- 1,476
- Points
- 63
Heatsinks are about 2" x 2" x 1 " thick. The module hole can be either a 12mm reamed hole, or drill out to be a nice press fit for copper modules. Both with have a 6-32 set screw added just in case. There are also 2 1/4-20 holes in the base for mounting. (Any other hole size can be chosen at no added cost) Finning is an added option. Price is $15 each, and finning is an additional $5 for fins on the sides. Other options available.
(The dark spot on this picture is a reflection of the camera. Actual pieces will not be polished unless requested)
Setscrew and allen wrench included.
$15ea + Shipping.
+$5 for Finning
+$5 for Base (Can choose clearance hole size) (2 1/4-20 philips flat head machine screws are included to mount the heatsink and base together)
Base is 2"x2"x1/4" and has holes in each corner all 1/4" from the edges leaving 1.5" between screws. This is a nice option to make mounting easier as well as make the heatsink more stable if not using it secured to a surface.
Custom Options Available. I can have multiple module holes made, and different mounting options. PM me to discuss details.
(The dark spot on this picture is a reflection of the camera. Actual pieces will not be polished unless requested)
Setscrew and allen wrench included.
$15ea + Shipping.
+$5 for Finning
+$5 for Base (Can choose clearance hole size) (2 1/4-20 philips flat head machine screws are included to mount the heatsink and base together)
Base is 2"x2"x1/4" and has holes in each corner all 1/4" from the edges leaving 1.5" between screws. This is a nice option to make mounting easier as well as make the heatsink more stable if not using it secured to a surface.
Custom Options Available. I can have multiple module holes made, and different mounting options. PM me to discuss details.
Last edited: