daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
UPDATED 9/17/14
Some of these have sat here too long
Let's see if we can't get them out into the community
If you're picking up more than one item, I'll do my best to save you shipping cost
Also, I'll entertain offers
These are wasted on the shelf
HAND HELD LASERS
First up, I have a 700mW, 405nm laser in a C-6 host
The laser comes with a
g-2 lens, a Mohrenberg focus ring and an X-Drive
It is powered by two @ 16340 batteries.
This has one of the high output diodes that Angelus found
It is set very conservatively for long life.
This should never wear out on you
It is offered at $110, shipped in the US
Last here, I have a Rick Trent "3 Watt" laser
This laser has the 9mm 445nm diode and is powered by a Trent driver
This laser is powered by two @ 18650 batteries.
The laser has adapters in it for the 18650's.
If you pull them out, you can use 26650's for more reserve.
This has a massive copper heat sink for long runs
The laser is putting out 2.7W with the included 3-element glass lens
If you get a G-type lens, it does the "rated" 3W.
It is offered at $190, shipped in the US
The marks on the crown in the pic below are just tape residue
I never noticed it until the flash made it pop out
I have cleaned it off
GAS LASERS
First up here is an extreme rarity
I have one two Helium/Cadmium (HeCd) lasers left
It is a Liconix brand laser
It comes with a model 4240 PSU
It is a model 4250 laser head
It is a large laser at 40 inches long
It is producing 20mW+
It is offered at $600 $500, PLUS shipping
Local pick up is available and I will give you a break on the cost if you pick it up
Packing these big lasers is a pain and the PSU must be shipped separately
Here is a Spectra Physics Model 907 (without housing) HeNe
It comes with a lab style PSU
Both the PSU and the Laser have "flying leads" so you can decide how to mount or house it
It is 38 inches long
It is producing 15mW (I think the tube alignment needs to be tweaked)
It is offered at $300 $250, PLUS shipping
Local pick up is available and I will give you a break on the cost if you pick them up
Packing these big lasers is a pain
Labby's . . . .
The first one up is a 300mW 635nm laser
It has a C-Mount diode with the square output
It has an 85-240VAC to 5VDC converter
You could power it directly with 5V if you want
It has analog modulation
It is $275 $250, plus shipping
Peace,
dave
Some of these have sat here too long
Let's see if we can't get them out into the community
If you're picking up more than one item, I'll do my best to save you shipping cost
Also, I'll entertain offers
These are wasted on the shelf
HAND HELD LASERS
First up, I have a 700mW, 405nm laser in a C-6 host
The laser comes with a
g-2 lens, a Mohrenberg focus ring and an X-Drive
It is powered by two @ 16340 batteries.
This has one of the high output diodes that Angelus found
It is set very conservatively for long life.
This should never wear out on you
It is offered at $110, shipped in the US
Last here, I have a Rick Trent "3 Watt" laser
This laser has the 9mm 445nm diode and is powered by a Trent driver
This laser is powered by two @ 18650 batteries.
The laser has adapters in it for the 18650's.
If you pull them out, you can use 26650's for more reserve.
This has a massive copper heat sink for long runs
The laser is putting out 2.7W with the included 3-element glass lens
If you get a G-type lens, it does the "rated" 3W.
It is offered at $190, shipped in the US
The marks on the crown in the pic below are just tape residue
I never noticed it until the flash made it pop out
I have cleaned it off
GAS LASERS
First up here is an extreme rarity
I have one two Helium/Cadmium (HeCd) lasers left
It is a Liconix brand laser
It comes with a model 4240 PSU
It is a model 4250 laser head
It is a large laser at 40 inches long
It is producing 20mW+
It is offered at $600 $500, PLUS shipping
Local pick up is available and I will give you a break on the cost if you pick it up
Packing these big lasers is a pain and the PSU must be shipped separately
Here is a Spectra Physics Model 907 (without housing) HeNe
It comes with a lab style PSU
Both the PSU and the Laser have "flying leads" so you can decide how to mount or house it
It is 38 inches long
It is producing 15mW (I think the tube alignment needs to be tweaked)
It is offered at $300 $250, PLUS shipping
Local pick up is available and I will give you a break on the cost if you pick them up
Packing these big lasers is a pain
Labby's . . . .
The first one up is a 300mW 635nm laser
It has a C-Mount diode with the square output
It has an 85-240VAC to 5VDC converter
You could power it directly with 5V if you want
It has analog modulation
It is $275 $250, plus shipping
Peace,
dave
Last edited:
