erdabyz
0
- Joined
- Jun 30, 2008
- Messages
- 286
- Points
- 0
This trade is for american members only I guess... but here it is.
I NEED these goggles:
400-532nm Hobby and Education Protective Eyewear [NOR-AL2-00000H-700] - $47.93
But i'm definitely not going to pay $30 extra for shipping. I've tried to do a GB with other spaniards but it went bad.
I've looked in usps webpage and it tells me that shiping a 1.1lbs package to spain would be about $12 without tracking (first class mail), and the shipping costs from oemlasersystems to USA are around $6- $8.
As some of you might know i've designed some laser diode boost drivers in the past and now I have 4 custom lasers all with my custom drivers, all of them working. (100mW PHR laser, 150-180mW 16X red laser, around 50mW PHR laser gun (a kind of phaser but it's used to hit photosensitive bullzeyes for a game) and a 5mW 635nm one)
I can make two different types of drivers, both of them small enough to fit an aixiz module.
One of them can drive blu-ray lasers from a single li-ion cell. Fixed current up to around 450mA, and only some currents available. If you want this driver simply tell me the current you would want it set to, and i'll tell you the closest current available.
The other one can drive red laser diodes up to 350mA from a single 1.5V cell, or a rechargeable 1.2V one. And it ACTUALLY gets 350mA (or at least 340) at 4V from a 1.5V cell, but it requires very solid battery connections and a good switch in the host is CRITICAL as it requires peak currents over 1.5A to startup. This driver is adjustable via a small potentiometer. I know that current red laser diodes require more than 350mA to operate at their max, and this driver can't give more than 4.7 volts so it makes it unsuitable for blu-rays. But the fact is that it can get such currents from a simple AAA cell.
So the trade is:
-I pay you $47.93 + paypal or whatever fees apply
-You pay shipping costs to your adress
-You receive the goggles from the store
-I send you a driver of your choice via non registered mail, I pay shipping
-You send me the googles via non registered airmail, again you pay shipping
-I give you rep
-You test my driver and give feedback
And that's it. I think this will only be interesting to people in USA. If you feel that the shipping costs are more than you would want to pay for a laser diode driver, I can also offer you micro-USB lithium battery chargers or some other electronic gadgets (all homemade) for that.
If you want any proof that my drivers work or anything just tell me.
I'll only accept members with relatively high reputation for this trade.
I NEED these goggles:
400-532nm Hobby and Education Protective Eyewear [NOR-AL2-00000H-700] - $47.93
But i'm definitely not going to pay $30 extra for shipping. I've tried to do a GB with other spaniards but it went bad.
I've looked in usps webpage and it tells me that shiping a 1.1lbs package to spain would be about $12 without tracking (first class mail), and the shipping costs from oemlasersystems to USA are around $6- $8.
As some of you might know i've designed some laser diode boost drivers in the past and now I have 4 custom lasers all with my custom drivers, all of them working. (100mW PHR laser, 150-180mW 16X red laser, around 50mW PHR laser gun (a kind of phaser but it's used to hit photosensitive bullzeyes for a game) and a 5mW 635nm one)
I can make two different types of drivers, both of them small enough to fit an aixiz module.
One of them can drive blu-ray lasers from a single li-ion cell. Fixed current up to around 450mA, and only some currents available. If you want this driver simply tell me the current you would want it set to, and i'll tell you the closest current available.
The other one can drive red laser diodes up to 350mA from a single 1.5V cell, or a rechargeable 1.2V one. And it ACTUALLY gets 350mA (or at least 340) at 4V from a 1.5V cell, but it requires very solid battery connections and a good switch in the host is CRITICAL as it requires peak currents over 1.5A to startup. This driver is adjustable via a small potentiometer. I know that current red laser diodes require more than 350mA to operate at their max, and this driver can't give more than 4.7 volts so it makes it unsuitable for blu-rays. But the fact is that it can get such currents from a simple AAA cell.
So the trade is:
-I pay you $47.93 + paypal or whatever fees apply
-You pay shipping costs to your adress
-You receive the goggles from the store
-I send you a driver of your choice via non registered mail, I pay shipping
-You send me the googles via non registered airmail, again you pay shipping
-I give you rep
-You test my driver and give feedback
And that's it. I think this will only be interesting to people in USA. If you feel that the shipping costs are more than you would want to pay for a laser diode driver, I can also offer you micro-USB lithium battery chargers or some other electronic gadgets (all homemade) for that.
If you want any proof that my drivers work or anything just tell me.
I'll only accept members with relatively high reputation for this trade.
Last edited:
