Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Is there any Interest in my workmanship ?

Th3dArKn3o

Th3dArKn3o

0
Joined
Dec 23, 2012
Messages
121
Points
0
Hey Guys I hope this is the right Section for my Thread !

I'm planning to get into Business if there is enough response here !

I'm very skilled in mechanics and electronics both and I have state of the art equipment available to do all kinds of Stuff !

Hosts, Drivers and complete Builds I can do anything you want ;)

You can look into two of my Builds to get an Idea of what I'm planning to do.

~700mW Powerful 638nm Full Custom Build Skeleton Host

My first 100% Custom Build (all by myself) 2.5W 445nm Blue Laser


If there is enough interest I can start a production run to get the costs down for me and you !
And I can build Full Custom Solutions of any diode and host you want !

Best Regards
Th3dArKn3o
 





Meatball

Meatball

0
Joined
Feb 1, 2008
Messages
2,894
Points
0
There is no craftsman here whose work is rejected unless it is of poor quality. Your asking price is yours to call. I would start by building 4-10 lasers or so. Sell them here on the boards as your own workmanship, and if you build them well, your customers will take notice and appreciate it. Or you can always send a laser over to an EU member for an in-depth review.

You are still a new member here, but do nice work and show yourself dependable I'm sure you will become busy will orders. :)

Good luck!

Tyler
 
Moistenator

Moistenator

0
Joined
Jun 26, 2012
Messages
788
Points
28
I like your work... As was said before, Your still a new user...
Knowledge = Power, Power = respect. People will respect you and your work a lot more when they are confident you know what your talking about... You have a lot of potential.
 
Th3dArKn3o

Th3dArKn3o

0
Joined
Dec 23, 2012
Messages
121
Points
0
I will gladly send one of my builds to a trusted EU-Member for testing and lpm'ing :D
 
chipdouglas

chipdouglas

0
Joined
Dec 23, 2008
Messages
3,948
Points
63
Your skeleton host is beautiful, but I think it could be one of my favorites ever if you made the front look more complete. It looks like an unfinished product.
 
DJNY

DJNY

0
Joined
Nov 2, 2009
Messages
5,991
Points
83
chipdouglas said:
Your skeleton host is beautiful, but I think it could be one of my favorites ever if you made the front look more complete. It looks like an unfinished product.
Click to expand...

Exactly my thoughts. Get a nice focus adapter for it :beer:

Can help you out with tests. Ich sprechen auch bisschen german ;)
 
Fiddy

Fiddy

0
Joined
May 22, 2011
Messages
2,726
Points
63
i love the one that looks like a RPG, id be keen on one of them if you can keep the costs down :D

Rpg7a6dm.jpg

20121213110146.jpg
 
Last edited:
chipdouglas

chipdouglas

0
Joined
Dec 23, 2008
Messages
3,948
Points
63
DJNY said:
Exactly my thoughts. Get a nice focus adapter for it :beer:

Can help you out with tests. Ich sprechen auch bisschen german ;)
Click to expand...


Me? i could. But i need to send my LPM in for calibration. I guess i could build a laser and mooch off daguins or scopeguys lpm's lol. :crackup:

Michael.
 
E

Encap

0
Joined
May 14, 2011
Messages
6,126
Points
113
A good first trys and designs.

I agree with what has been said has been said focus adapters for both are needed and I would like to see a larger diameter tube section for better adult size hand comfort and/or perhaps a gripping surface on the 445nm
 
Th3dArKn3o

Th3dArKn3o

0
Joined
Dec 23, 2012
Messages
121
Points
0
chipdouglas said:
Your skeleton host is beautiful, but I think it could be one of my favorites ever if you made the front look more complete. It looks like an unfinished product.
Click to expand...

That is because I made the host without planning or sketching just with intuition :D

But like I said I could easily change and optimize the Design this is just an Prototype :)
 
Th3dArKn3o

Th3dArKn3o

0
Joined
Dec 23, 2012
Messages
121
Points
0
DJNY said:
Exactly my thoughts. Get a nice focus adapter for it :beer:

Can help you out with tests. Ich sprechen auch bisschen german ;)
Click to expand...

I'm thinking about borrow you my Skeleton for Reviewing and lpm tests :)
PM me if you're interested !

Fiddy said:
i love the one that looks like a RPG, id be keen on one of them if you can keep the costs down :D
Click to expand...

I can sell you the Prototype for an affordable Price if you're interested PM me for Details :)

Encap said:
A good first trys and designs.

I agree with what has been said has been said focus adapters for both are needed and I would like to see a larger diameter tube section for better adult size hand comfort and/or perhaps a gripping surface on the 445nm
Click to expand...

Yes I'll do that for sure next time :)
Some may like the smaller diameter tube some not I can do individual changes in Design for each Customer ...
 
Last edited:
chipdouglas

chipdouglas

0
Joined
Dec 23, 2008
Messages
3,948
Points
63
No no.... Don't change the design. It is gorgeous. Just make a matching cap that the lens threads I to.
 
S

Sly Fox

0
Joined
Nov 28, 2012
Messages
18
Points
0
What price would you be trying to sell a 2.1-2.4W 445 for and what would be the maxium duty cycle available?
 
Th3dArKn3o

Th3dArKn3o

0
Joined
Dec 23, 2012
Messages
121
Points
0
chipdouglas said:
No no.... Don't change the design. It is gorgeous. Just make a matching cap that the lens threads I to.
Click to expand...

I can make you an laser with this host and this time with
an custom focus adapter cap if you want :)

Sly Fox said:
What price would you be trying to sell a 2.1-2.4W 445 for and what would be the maxium duty cycle available?
Click to expand...

I sent you a PM ;)
 
Last edited:
You must log in or register to reply here.




Top