[SOLD]: Mitsubishi ML501P73 TR-801 w/ 18650 battery!! 983mW!! With free Multimeter!!

This laser comes with one 18650 battery and case as shown in the picture. The heat sink was made by the one and only Ehgemus! It's a screw on type heat sink that goes onto the pill. I believe these heat sinks are a little bit better than the regular style since it makes a better contact with the rest of the body, which helps with heat dissipation. The diode is pressed into a copper module and placed into the heat sink with some Shin-Etsu thermal compound and held in tight by the set screw.

Diode: Mitsubishi 500mW (ML501P73)
Wavelength: 638nm
Host: Trustfire TR-801
Lens: AR coated Acrylic
Module: Copper
Battery: 1 x 18650
Driver: NANJG 101-AK-A1 @ 1440 mA
Output: 983mW (G1)













The driver is a multi-mode driver with 16 different modes in 3 groups.



Low (10%) - Mid (35%) - High (100%) - Strobe - SOS
Low (10%) - Mid (35%) - High (100%)
Low (10%) - Mid (35%) - High (100%) - Special Police Type Strobe - Slow Strobe (3Hz) - Super Slow Strobe (1Hz) - SOS

I could also take out the modes completely if needed. Also, additional AMC7135 ICs can be stacked for more current ouput and would probably top out the laser output over 1W with a G1/G2 lens. In the LPM graph, at its current level it's already almost there!

AR Acrylic lens


G1 lens (not included)








Price: SOLD

Batteries will not be shipped Internationally!! Sorry!!

Thanks for looking!! :beer:

Re: FS: Mitsubishi ML501P73 TR-801 w/ 18650 battery!! 983mW!!

:bumpit::bumpit::bumpit::bumpit::bumpit::bumpit:

I'll be throwing in a free HF Multimeter!!

Re: FS: Mitsubishi ML501P73 TR-801 w/ 18650 battery!! 983mW!! With free Multimeter!!

Free bump

Great looking build. Really liked the custom heatsink :beer:

Good luck with the sale