- Joined
- Jan 23, 2012
- Messages
- 201
- Points
- 0
SOLD: Custom 1.1W 445nm "Indian Larry" -- Gold Plated Copper HS -- Flame Design
SOLD
I have the "Indian Larry" (it reminds me of some old school Indian Larry bike)
445nm running at 1.1w (from survival)
MicroBoost driver set at 1.1 amps, heat sinked.
3 element glass, coated for "blue" (from survival)
Custom polished aluminum host , with etched flame design that wraps around the body.
REAL 24K Gold Plated Copper Heat Sink Head ( lots of gold on here, plated for a full 5 minutes)
Key Switch on end (2 keys included)
Side Clicky Switch modified for high current use.
Custom Aluminum "PILL" for max thermal transfer for driver.
It measures 22mm x 131mm
It weighs in at 149 grams.
Uses an 18650 battery. I will include a "cheaper" common "blue" 1600mah 18650. I would suggest a better battery though. Battery is inserted negative side first.
Diode and driver have max of 10 minutes total time on them.
It is an efficient diode, producing 1.1+ watts at 1.1A with a 3 element glass.
Duty cycle is around one minute on, one minute off. It will run longer, but one minute should be plenty to get done what you would with a handheld.
It is focusable if you remove the gold head. An Aixiz focusing ring is attached to the lens for focusing. However, a shorter duty cycle is required when not using the head. I recommend screwing the head back on after you have focused it to your needs.
This was custom built by myself, additional machining, polishing, etching, plating etc. A lot of time and care went in to this build.
The flames actually have a "satin-y" sparkly look in real life, the cam does not pick it up well.
Copper heatsink before final polishing and plating
Copper Heatsink after 24K gold plating
I am asking $200 shipped Priority Mail to USA. Canadian buyer will be an additional $10 USD shipping. I will not ship to any other country, no exceptions.
I will guarantee the gold plating on the head for the life of the laser. If it starts to wear, send it to me and I will re-plate it for you!!! It shouldnt, there is a lot on there!!!!
Also, NO Paypal. SORRY!! I can only accept Google Checkout -- or a trade!! Google Checkout requires a credit/debit card, which help with preventing minors from obtaining such lasers.
Trades are welcome!! I.E , I am looking for a set of 30Kpps+ galvo scanners and amps.
Thanks for looking!!
SOLD
I have the "Indian Larry" (it reminds me of some old school Indian Larry bike)
445nm running at 1.1w (from survival)
MicroBoost driver set at 1.1 amps, heat sinked.
3 element glass, coated for "blue" (from survival)
Custom polished aluminum host , with etched flame design that wraps around the body.
REAL 24K Gold Plated Copper Heat Sink Head ( lots of gold on here, plated for a full 5 minutes)
Key Switch on end (2 keys included)
Side Clicky Switch modified for high current use.
Custom Aluminum "PILL" for max thermal transfer for driver.
It measures 22mm x 131mm
It weighs in at 149 grams.
Uses an 18650 battery. I will include a "cheaper" common "blue" 1600mah 18650. I would suggest a better battery though. Battery is inserted negative side first.
Diode and driver have max of 10 minutes total time on them.
It is an efficient diode, producing 1.1+ watts at 1.1A with a 3 element glass.
Duty cycle is around one minute on, one minute off. It will run longer, but one minute should be plenty to get done what you would with a handheld.
It is focusable if you remove the gold head. An Aixiz focusing ring is attached to the lens for focusing. However, a shorter duty cycle is required when not using the head. I recommend screwing the head back on after you have focused it to your needs.
This was custom built by myself, additional machining, polishing, etching, plating etc. A lot of time and care went in to this build.
The flames actually have a "satin-y" sparkly look in real life, the cam does not pick it up well.
Copper heatsink before final polishing and plating
Copper Heatsink after 24K gold plating
I am asking $200 shipped Priority Mail to USA. Canadian buyer will be an additional $10 USD shipping. I will not ship to any other country, no exceptions.
I will guarantee the gold plating on the head for the life of the laser. If it starts to wear, send it to me and I will re-plate it for you!!! It shouldnt, there is a lot on there!!!!
Also, NO Paypal. SORRY!! I can only accept Google Checkout -- or a trade!! Google Checkout requires a credit/debit card, which help with preventing minors from obtaining such lasers.
Trades are welcome!! I.E , I am looking for a set of 30Kpps+ galvo scanners and amps.
Thanks for looking!!
Attachments
Last edited: