Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

SOLD Clearance Sale!!!

Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
SOLD OUT...again


I've got some more of these available. Around ~20.

These are the kit prices:
USA customers:
1 kit - $10.00 ea.
2 kits - $7.50 ea.
3 Kits - $6.50 ea.
5+ kits - $6 ea.
10+ kits - $5 ea.

International orders are restricted to purchases of 5 or more kits, and must add an extra $10 to their order for flat rate priority mail.

My objective is to clear these out. So the more you get out of my work space the cheaper they are.


Host is blue anodized aluminum. Side mounted reverse clicky switch
3xAAA battery holder.

More than enough room inside the host to mount your drivers whether it be rkcstr, groove, microboost, odicforce, o-like ect....

Heat sink is 1.09" OD x ~0.60" length (0.05" tolerance). Has 1 set screw in the side.

This "kit" comes with the following:
Blue host with 3xAAA battery holder
custom aluminum heat sink
Black carrying holster

Pictures and video below....

 

Attachments

  • blue1.jpg
    blue1.jpg
    134 KB · Views: 147
  • blue2.jpg
    blue2.jpg
    97.4 KB · Views: 130
  • blue3.jpg
    blue3.jpg
    98.8 KB · Views: 129
  • blue4.jpg
    blue4.jpg
    67.7 KB · Views: 119
  • blue6.jpg
    blue6.jpg
    101.7 KB · Views: 132
  • Pic1.jpg
    Pic1.jpg
    36.1 KB · Views: 133
  • Pic2.jpg
    Pic2.jpg
    70.2 KB · Views: 111
  • batch.jpg
    batch.jpg
    59.9 KB · Views: 176
Last edited:





iFoSh

iFoSh

0
Joined
Aug 5, 2010
Messages
347
Points
0
Re: Clearance Sale!!!

Do those prices include U.S. shipping?
 
iFoSh

iFoSh

0
Joined
Aug 5, 2010
Messages
347
Points
0
Re: Clearance Sale!!!

I'll take a couple! PM coming.

Edit: Payment sent for 2. Thanks!
 
Last edited:
Kevlar

Kevlar

0
Joined
Apr 26, 2010
Messages
1,353
Points
48
Re: Clearance Sale!!!

I don't remember from your other thread but can that tail cap be modified to accept a 18650?
 
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Re: Clearance Sale!!!

That was a different host.

This one won't accept an 18650.
The battery holder can be modified to use 3 10440 in parallel to power a 445nm, it can also use another type of battery, not sure of the name but DTR used it for a 445 in his review of this host in the reviews section
 
Kevlar

Kevlar

0
Joined
Apr 26, 2010
Messages
1,353
Points
48
Re: Clearance Sale!!!

This host has the 3XAAA battery catridge similar to my MXDL 3405 which I modded to fit 2XCR2s or 2XRCR2s, it might be possible to do the same with this one. Or as you said DTR 1X18500, lots of options, nice!!

Incoming PM!!
 
Last edited:
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Re: Clearance Sale!!!

Kevlar said:
This host has the 3XAAA battery catridge similar to my MXDL 3405 which I modded to fit 2XCR2s or 2XRCR2s, it might be possible to do the same with this one. Or as you said DTR 1X18500, lots of options, nice!!

Incoming PM!!
Click to expand...

yeah 2xCR2 option would not be a problem at all. You'd probably want to get a short piece of PVC pipe to slide in there to make it a better fit for them though.
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: Clearance Sale!!!

Kevlar said:
This host has the 3XAAA battery catridge similar to my MXDL 3405 which I modded to fit 2XCR2s or 2XRCR2s, it might be possible to do the same with this one. Or as you said DTR 1X18500, lots of options, nice!!

Incoming PM!!
Click to expand...


The bottom of the tail cap does not have a big unnecessary plastic spacer in it like the MXDL did.

p1011333.jpg





Also I suggest some glue to hold the retainer in place.

p1010609a.jpg




If you try to force the unit to accept an 18650 you could damage the momentary switch by putting force on the retainer. This is one of the reasons I suggest glue to hold the retainer in place.
 
Kevlar

Kevlar

0
Joined
Apr 26, 2010
Messages
1,353
Points
48
Re: Clearance Sale!!!

I use a piece of 3/4 inch PVC as a sleeve for the CR2 in my MXDL that centers the batteries and a 1CM neodymium magnet (also know as a strong, rare, earth magnet) as a spacer between the two batteries.

Oh well, if it doesn't work there are the other battery configuration options (3XAAA or 1X18500) for this host.

Actually, in my MXDL build, its a LOC-815 w/ rckstr driver, I started using 2XAAA (Li Ion) in the 3XAAA battery cartridge (just jumped the other AAA slot) before I did the CR2 battery mod.
 
Alexizupinhea

Alexizupinhea

0
Joined
Mar 25, 2008
Messages
1,007
Points
38
Re: Clearance Sale!!!

When you say all sold out for now, do you mean the 20 you have on hand? or do you have more of these coming at this price? If so, I'd take at least 3 kits, possibly 5 or 10.
 
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Re: Clearance Sale!!!

I believe i'm sold out for good.
I've got ~20 left that need heat sinks. They are spoken for though.
 
You must log in or register to reply here.




Top