- Joined
- Mar 29, 2013
- Messages
- 1,221
- Points
- 63
Hello all! I am saving up for a CNI MGL-H 1500mw, and i need to turn some of my lasers into green paper!
Up for sale is my recently rebuilt Saik-305 9mm build. The original driver (now replaced) was supposed to output 2.4 amps, and the final laser only put out 2.6 watts
Now, the new and replaced driver is putting out 2.3 amps (much safer) and the laser puts out 3.1 WATTS! :drool:
That made me happy that i didn't in fact get an inefficient diode!
The measurement was taken with a blufan MK. II 5 watt LPM
ANYWAYS. About the build.
What makes this build so UNIQUE is that it is one of the very few 3 watt BOOST lasers out there.
THAT'S RIGHT. Uses a SINGLE 32600 li-ion cell!
This was achieved with Lazeerer's SXB (SUPER X-Boost)
The driver is heatsinked DIRECTLY to the pill so run time is maximized
The heatsink is a polished aluminum sink from MrCrouse
Anyways, here are pics of the internals and externals of the laser!
HEATSINK AND DIODE AND LENS:
Custom Bored Battery tube:
Beamshots (no smoke, nothing)
FIRST PHOTO WAS TAKEN WITH FLASH!
Outside at 5pm:
Slightly later pointing in the alley:
This laser has served me well, even though i rarely used it.
Asking price is $205 OR $225 for everything! (BASE)
OPTIONS:
Custom MrCrouse Focus adapter shown in photos - $15 (original focus ring will be included)
Feilong 5000mah 32600 Battery - $12
Up for sale is my recently rebuilt Saik-305 9mm build. The original driver (now replaced) was supposed to output 2.4 amps, and the final laser only put out 2.6 watts
Now, the new and replaced driver is putting out 2.3 amps (much safer) and the laser puts out 3.1 WATTS! :drool:
That made me happy that i didn't in fact get an inefficient diode!
The measurement was taken with a blufan MK. II 5 watt LPM
ANYWAYS. About the build.
What makes this build so UNIQUE is that it is one of the very few 3 watt BOOST lasers out there.
THAT'S RIGHT. Uses a SINGLE 32600 li-ion cell!
This was achieved with Lazeerer's SXB (SUPER X-Boost)
The driver is heatsinked DIRECTLY to the pill so run time is maximized
The heatsink is a polished aluminum sink from MrCrouse
Anyways, here are pics of the internals and externals of the laser!
HEATSINK AND DIODE AND LENS:
Custom Bored Battery tube:
Beamshots (no smoke, nothing)
FIRST PHOTO WAS TAKEN WITH FLASH!
Outside at 5pm:
Slightly later pointing in the alley:
This laser has served me well, even though i rarely used it.
Asking price is $205 OR $225 for everything! (BASE)
OPTIONS:
Custom MrCrouse Focus adapter shown in photos - $15 (original focus ring will be included)
Feilong 5000mah 32600 Battery - $12
By purchasing this laser you are agreeing to the following:
- You are over 18 years of age .
- You understand that this device mentioned above is dangerous when not used properly/safely
- You will use this product as your own. Anything you do with this laser is YOUR responsibility, and you are accepting this when you purchase this laser. All liability goes to the buyer.
- You will use this laser in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of this device, the seller is in no way responsible for actions committed by the buyer/user.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
- You are over 18 years of age .
- You understand that this device mentioned above is dangerous when not used properly/safely
- You will use this product as your own. Anything you do with this laser is YOUR responsibility, and you are accepting this when you purchase this laser. All liability goes to the buyer.
- You will use this laser in a safe and responsible manner and for a legal purpose.
- You are legally responsible for the use of this device, the seller is in no way responsible for actions committed by the buyer/user.
- You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
Last edited: